Lenovo ThinkSystem SD530 User manual

Lenovo ThinkSystem SD530 Compute Node Type 7X21
Lenovo ThinkSystem D2 Enclosure Type 7X20
Quick Start
PN: SP47A24250
Printed in China
In the box
Your shipping box contains the following items:
SD530 Compute Node Type 7X21
D2 Enclosure Type 7X20
Note: There will be one to four nodes per enclosure in the box
depending on your purchase.
Material box, including items such as power cords, printed
documentation and slide-rail installation kit.
If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase and packing material.
They might be required to receive warranty service.
First glance
Note: Your solution might look slightly different from the illustrations.
Enclosure front view: Node bays
Node front view: Six 2.5-inch hot-swap drive model
Node front view: Four 2.5-inch hot-swap drive model
Enclosure rear view: Eight low-profile PCIe 3.0 x8 cards
Enclosure rear view: Four low-profile PCIe 3.0 x16 cards
Installing the solution
To install the solution, do the following:
1. Install the required solution components.
2. Install the enclosure into the rack.
See the Rack Installation Guide that was provided with the rail kit.
3. Connect the cables.
4. Turn on the compute nodes.
5. Connect the management controller to the network.
6. Configure the system.
For detailed information about installing hardware options and
configuring the system, see the following website:
http://thinksystem.lenovofiles.com/help/index.jsp

Technical specifications
Dimensions and weight
2U enclosure
Height: 87.0 mm (3.5 inches)
Depth: 891.5 mm (35.1inches)
Width: 488.0 mm (19.3 inches)
Weight:
• Minimum (with one node): 22.4 kg (49.4 lbs)
• Maximum (with four nodes): 55.0 kg (121.2 lbs)
Node
Height: 41.0 mm (1.7 inches)
Depth: 562.0 mm (22.2 inches)
Width: 222.0 mm (8.8 inches)
Weight:
• Minimum: 3.5 kg (7.7 lbs)
• Maximum: 7.5 kg (16.6 lbs)
Node processor
Intel Xeon®
Node memory
Minimum: 8GB
Maximum:
512 GB (16 x 32 GB RDIMM)
1,024 GB (16 x 64 GB LRDIMM)
Type: PC4-21300 (dual-rank), 2666 MT/s, errorcorrecting code
(ECC), double-data-rate 4 (DDR4) registered DIMM (RDIMM)
or load reduced DIMM (LRDIMM)
Slots: 16 DIMM slots
Node expansion bays (depending on the
model)
Four 2.5-inch hot-swap SAS/SATA HDD/SSD bays
Six 2.5-inch hot-swap SAS/SATA HDD/SSDbays
Four 2.5-inch hot-swap SAS/SATA HDDbays + Two 2.5-inch
hot-swap SAS/NVMe drive bays
First Edition (August 2017)
© Copyright Lenovo 2017.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is
delivered pursuant to a General Services Administration “GSA” contract,
use, reproduction, or disclosure is subject to restrictions set forth in
Contract No. GS‐35F‐05925.
Where to go for support
Link
QR Code
Lenovo Press
(Product guides and white
papers)
https://lenovopress.com/
Lenovo System x Server
forums
https://forums.lenovo.com/t5/
Datacenter-Systems/ct-
p/sv_eg
Lenovo Support –D2
Enclosure (including drivers
and software)
https://support.lenovo.com/p/
servers/d2_enc
Lenovo Support –SD530
Compute Node (including
drivers and software)
https://support.lenovo.com/p/
servers/sd530
Lenovo Product Security
Advisories
http://support.lenovo.com/us/
en/product_security/home
Lenovo Server Proven
(Compatibility information)
http://support.lenovo.com/us/
en/serverproven