Vivo STAND-V002T/W User manual

Dual Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002t
SKU: STAND-V002T/W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x2)
VESA Plate
B(x2)
Bracket
C(x1)
Clamp
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Lower Pole
E(x1)
Upper Pole
F (x1)
Pole Cap
G (x1)
Pole Connector
H (x2)
Cable Clip
S-A (x3)
M6x16mm
Screw
K (x1)
Support Plate
I(x1)
Grommet
Base
J(x5)
Rubber Pad
M-A (x8)
M4x12mm
Screw
M-B (x8)
M4x16mm
Screw
M-C (x8)
M5x12mm
Screw
M-D (x8)
M5x16mm
Screw
M-E (x8)
M5 Washer
M-F (x8)
Spacer
T-A (x1)
3mm Allen Key
T-B (x1)
4mm Allen Key
T-C (x1)
6mm Allen Key
S-B (x2)
Thumbscrew
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 2
TOOLS NEEDED
Phillips
Screwdriver
OPTION A: Clamp Installation
Stick Rubber Pads (J) to the underside of Clamp (C). Attach Lower Pole (D) to Clamp (C) using
M6x16mm Screws (S-A). Tighten using 4mm Allen Wrench (T-B). Attach Clamp (C) to desktop.
STEP 1
Attach Pole Cap (F) to top of Upper Pole (E).
F
E
10-88mm
J
C
D
22 lbs
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
S-A
T-B

4
STEP 2 (Continued)
OPTION B: Grommet Base Installation
For grommet hole mounting, remove screw in top of bolt on Clamp (C). Stick Rubber Pads (J) to
bottom of Grommet Base (I). Attach Support Plate (K) to bolt and run through grommet hole into
Grommet Base (I) and thread into Lower Pole (D) as shown in diagram.
STEP 3
Slide Cable Clip (H) and Bracket (B) onto Lower Pole (D) and tighten using 6mm Allen Wrench (T-C).
C
J
I
L
10-75mm
D
D
H
B
P
K
T-C

5
STEP 4
Attach Upper Pole (E) to Lower Pole (D) using Pole Connector (G). Tighten grub screws in pole
connector using 3mm Allen Wrench (T-A). Slide remaining Cable Clup (H) and Bracket (B) onto Upper
Pole (E) and tighten using 6mm Allen Wrench (T-C).
STEP 5
OPTION A: Flat Back Monitor
Attach VESA Plates (A) to back of monitors using appropriate Screws (M-A, M-C) and Washers (M-E).
B
H
P
N
G
M- A
M- C
M- E
A
T-A
T-C

6
STEP 5 (Continued)
STEP 6
OPTION B: Curved Back Monitor
Attach VESA Plates (A) to back of monitors using appropriate Screws (M-B or M-D). If screws are too
long, Spacers (M-F) may be required.
Slide VESA Plates (A) into Brackets (B) and secure using Thumb Screws (S-B) as shown in diagram.
STEP 7
Adjust tension in monitor bracket with 6mm Allen Wrench (T-C).
M- B
M- D
M- E
M- F
A
P
S-B
T-C

7
STEP 8
Run cables through Cable Clips (H).
STEP 9
Store Allen Wrenches (T-A, T-B, T-C) in cable management clips (H) for future adjustments.
Adjust as Desired
O
P
N
180°
180°
360°
360°
+45°
-45°
+45°
-45°
T-A
T-B
T-C

LAST UPDATED: 03/24/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303