Lesro 84" Rectangular Steel Frame Conference Table User manual

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).
Note: These instructions are intended for various shapes, models and congurations.
Your product may not look exactly as shown in the diagrams.
Recommendation: Retighten all screws and bolts on a seasonal basis to ensure
your product remains strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
55 Peters Road
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
1. Unpack and identify all parts.
2. Place the tabletop upside down on a soft, clean
surface to prevent scratches.
3. Attach one leg to tabletop using 1” Allen
bolts and washers into threaded inserts, as
shown in gure 1. Be sure leg angles out and
short connecting post is parallel to tabletop
reinforcing plate. Keep bolts slightly loose for
now.
4. Connect cross tube to connecting post on rst
leg using ½” Allen bolt, as shown in gure 2. Be
sure the 2 connecting posts on cross tube face
the center of table. Keep bolt slightly loose for
now.
5. Connect second leg to cross tube and tabletop,
and also connect third leg to tabletop, as shown
in gure 3. Keep all bolts slightly loose for now.
© 2011 Lesro Industries, Inc. March 2011
Assembly Instructions
For 84” & 96” Steel Frame Conference Tables
(Rectangular and Elliptical models 84” and 96” long)
Parts List
Tabletop
Legs, 4 pcs.
Cross Tubes, 2 pcs.
Center ‘H’ Frame
Shelf
Figure 1
Hardware Pack
1” Allen Bolts, 20 pcs.
Washers, 20 pcs.
½” Allen Bolts, 8 pcs.
Allen Wrench
¾” Shelf Screws
Connecting
Post
Reinforcing
Plate
Figure 2
Figure 3
Cross
Tube
‘I’ Beams
Leg
angles
out
Second
Leg
Third
Leg
Connecting
Posts

Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
6. Using 2 or more people, carefully
place the shelf between the 3 legs
with the nished surface facing the
tabletop. Use care in handling to
avoid damage. Align holes and
attach shelf to ‘I’ beams using 1”
Allen bolts and washers as shown
in gure 4. Tighten these shelf bolts
securely.
7. Connect ‘H’ frame to rst cross tube
and connect second cross tube to ‘H’
frame and to third leg as shown in
gure 5. Keep all bolts slightly loose
for now.
8. Connect fourth leg to second cross
tube and to tabletop, also as shown
in gure 5.
9. Tighten all leg and cross tube bolts
securely at this time.
10. Using 2 or more people, carefully ip
table to upright position.
11. Attach shelf to cross tubes using
wood screws as shown in gure 6.
Tighten all screws securely using
care not to strip.
12. Your product is now assembled and
ready to use.
© 2011 Lesro Industries, Inc. March 2011
Assembly Instructions
For 84” & 96” Steel Frame Conference Tables
(Rectangular and Elliptical models 84” and 96” long)
Figure 5
Figure 6
Figure 4
‘H’ Frame
First
Cross
Tube
Second
Cross
Tube
Third
Leg
Fourth
Leg
Shelf
Figure 5
‘I’ Beams