Lesro Mystic Lounge User manual

Tools required: 9/16” ratchet
Note: These instructions are intended for various models and congurations. Your products may not
look exactly as shown in the diagrams.
Important: The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong
and stable for many years of use.
Weight Capacity: All guest chairs in this series have a weight capacity of 350 lbs. per seat, unless
otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us online at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
Panel Arm Guest Chair
1. Unpack and identify all parts.
2. Attach back cushion to arm frame by inserting
posts into key hole slots, as shown in gure 1.
With posts fully inserted, press back cushion
down until posts “bottom-out” in key hole slots.
3. Important note: Thicker fabrics might make it
difcult to fully insert the posts into the key hole
slots. If this problem occurs, you must press the
back and arm pieces tightly together. This will
compress the fabric and foam and enable the post
head to drop deep enough into the key hole slot.
4. Attach second arm frame to back cushion by
repeating step 2.
5. When properly connected, bottom edge of back
cushion should align with bottom edges of arm
frames, as shown in gure 2.
6. Lay assembly on its back on a soft, clean surface
and slide seat cushion into place, as shown in
gure 3.
7. Attach seat cushion to back cushion and arm
frames using 3” hex bolts and washers, as shown
in gure 4. Keep all bolts slightly loose for now.
8. With all bolts connected but still loose, stand chair
upright on a level surface. Align bottom edges
of arm frames, back cushion and seat cushion,
(similar to gure 2) and tighten all bolts securely.
9. Your product is now assembled and ready to use.
© 2014 Lesro Industries, Inc. May 2014
Assembly Instructions
For Mystic Lounge
Parts List
Arm Frames, left & right
Seat Cushion
Back Cushion
Hardware Pack
3” Hex Bolts, 6 pcs.
Washers, 6 pcs.
Figure 1
Figure 2
Figure 3
Figure 4
Post Key hole
slot
All edges should
be aligned
Figure 1

Tools required: 9/16” ratchet
Note: These instructions are intended for various models and congurations. Your products may not
look exactly as shown in the diagrams.
Important: The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong
and stable for many years of use.
Weight Capacity: All loveseats in this series have a weight capacity of 600 lbs., sofas have a
weight capacity of 700 lbs., and Bariatric 750 lbs. unless otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us online at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
1. Unpack and identify all parts.
2. Attach back cushion to arm frame by inserting posts
into key hole slots, as shown in gure 1. With posts
fully inserted, press back cushion down until posts
“bottom-out” in key hole slots.
3. Important note: Thicker fabrics might make it
difcult to fully insert the posts into the key hole slots.
If this problem occurs, you must press the back and
arm pieces tightly together. This will compress the
fabric and foam and enable the post head to drop
deep enough into the key hole slot.
4. Attach second arm frame to back cushion by
repeating step 2.
5. When properly connected, bottom edge of back
cushion should align with bottom edges of arm
frames as shown in gure 2.
6. Lay assembly on its back on a soft, clean surface
and slide seat cushion into place, as shown in g 3.
7. Attach seat cushion to back cushion and arm frames
using 3” hex bolts and washers, as shown in gure 4.
Keep all bolts slightly loose for now.
8. With all bolts connected but still loose, stand
loveseat/sofa upright on a level surface. Align
bottom edges of arm frames, back cushion and seat
cushion, (similar to gure 2) and tighten all bolts
securely.
9. Your product is now assembled and ready to use.
© 2014 Lesro Industries, Inc. May 2014
Assembly Instructions
For Mystic Lounge
Parts List
Arm Frames, left & right
Seat Cushion
Back Cushion
Hardware Packs
3” Hex Bolts
Washers
7 pcs. each for Bariatric
8 pcs. each for Loveseat
9 pcs. each for Sofa
Figure 1
Figure 2
Figure 3
Figure 4
Post
All edges should
be aligned
Panel Arm Bariatric, Loveseat & Sofa
Key hole
slot