Lesro Avon Connecting Center Table User manual

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).
Note: These instructions are intended for various models and congurations. Your products may not
look exactly as those shown in the diagrams.
Important: The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong
and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us online at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone [phone]
Fax [phone]
www.lesro.com
© 2018 Lesro Industries, Inc. Feb 2018
Assembly Instructions
For Avon Connecting Center Table
Parts List
Tabletop
Connecting Brackets, Front, 2 pcs.
Connecting Brackets, Back, 2 pcs.
⅝” Phillips Screws, 16 pcs.
Allen Wrench
1. Unpack and identify all parts.
2. Assemble chairs individually according
to chair instructions before attaching
connecting table.
3. Position chairs about 2 feet apart.
4. Use an Allen wrench to loosen the seat
cushion bolts about 1/2” on facing sides
of both chairs, as shown in gure 1.
5. Attach the front and back brackets to
both chairs. With bolt inserted fully into
slot, as shown in gure 2, retighten bolts
securely.
6. Pull the chairs together and rest the
tabletop on the brackets, as shown in
gure 3. Sticker on underside of tabletop
faces back. (22 ¼” edge goes in front.
23 ¼” edge goes in back.)
7. Attach tabletop to brackets using Phillips
screws into pre-drilled holes, as shown
in gure 4. Once all 8 screws are started,
tighten securely, using care not to strip.
8. With both chairs resting on a level oor,
carefully align the back legs so they form
a straight line, as shown in gure 5.
9. Insert Phillips screws through brackets
into bottom of seat cushions and tighten
securely, using care not to strip.
10. Your product is now assembled and
ready to use.
Fig 1
Fig 3
Loosen
seat bolts
about
1/2” to
attach
brackets
Be sure legs are in a straight
line before inserting Phillips
screws into bottom of seats.
Fig 4
Fig 5
Closeup View
Seat
screws
Table
screws
Front bracket
Back bracket
Fig 2
Bolt should
be inserted
fully into slot
Phillips
screws
into seats
Phillips
screws
into table

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).
Note: These instructions are intended for various models and congurations. Your products may not
look exactly as those shown in the diagrams.
Important: The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong
and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us online at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone [phone]
Fax [phone]
www.lesro.com
© 2018 Lesro Industries, Inc. Feb 2018
Assembly Instructions
For Avon Connecting Corner Table
Parts List
Tabletop
Connecting Brackets, Front, 2 pcs.
Connecting Brackets, Back, 2 pcs.
Table Leg
⅝” Phillips Screws, 18 pcs.
Allen Wrench
1. Unpack and identify all parts.
2. Assemble chairs individually according to
chair instructions before attaching connecting
table.
3. Position chairs about 2 feet apart.
4. Use an Allen wrench to loosen the seat
cushion bolts about 1/2” on facing sides of
both chairs, as shown in gure 1.
5. Attach the front and back brackets to both
chairs. With bolt inserted fully into slot, as
shown in gure 2, retighten bolts securely.
6. Place the tabletop upside down on a soft,
clean surface to prevent scratching.
7. Attach table leg to tabletop using Phillips
screws into pre-drilled holes, as shown in
gure 3. Tighten screws securely using care
not to strip.
8. Pull the chairs together and rest the tabletop
on the brackets, as shown in gure 4.
9. Attach tabletop to brackets using Phillips
screws into pre-drilled holes, as shown in
gure 5. Once all 8 screws are started, tighten
securely, using care not to strip.
10. After checking that chairs are square to
one another, insert Phillips screws through
brackets into bottom of seat cushions as
shown in gure 6. Tighten securely, using
care not to strip.
11. Your connecting corner table is now
assembled and ready to use.
Fig 1
Fig 4
Loosen
seat bolts
about
1/2” to
attach
brackets
Fig 6
Closeup View
Seat
screws
Table
screws
Front bracket
Back bracket
Fig 2
Bolt should
be inserted
fully into slot
Phillips screws into seats
Fig 3
Fig 5
Phillips screws into table
Phillips
screws