Lesro Gansett Guest User manual

Tools required: Allen wrenches (included in hardware pack)
Note: These instructions are intended for various models and congurations. Your
products may not look exactly as those shown in the diagrams.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product
remains strong and stable for many years of use.
Weight Capacity: All guest chairs in this series have a weight capacity of 300 lbs.per
seat unless otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Seating the Way You Want It
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone [phone]
Fax [phone]
www.lesro.com
© 2019 Lesro Industries, Inc. Jan 2019
Assembly Instructions
For Gansett Guest and Oversize Chairs
Parts List
Leg Frame, Left
Leg Frame, Right
Back Support Bar
H-Frame Seat Support
Back Cushion
Seat Cushion
Hardware Pack
½” Allen Bolts , 4 pcs.
2” Allen Bolts, 6 pcs.
⅜ Allen Bolts, 2 pcs.
Small Allen Wrench
Large Allen Wrench
1. Unpack and identify all parts.
2. Place one of the leg frames on a table or
the oor, as shown in gure 1. Be sure
the surface is soft and clean to prevent
scratching. Connect the H-frame seat
support to the leg frame using 1/2” Allen
bolts. Keep bolts slightly loose.
3. Slide back support bar through slot in
back cushion, as shown in gure 2. Leave
equal lengths protruding from each end.
4. Connect back cushion to leg frame by
inserting back support bar into slot in leg
frame, as shown in gure 3. Secure using
3/8” Allen bolt. Keep bolt slightly loose.
5. Secure back cushion to H-frame using 2”
Allen bolts, as shown in gure 4. Keep
bolts slightly loose.
2” Allen
Bolts
Fig 4
(continued on page 2)
Fig 1
1/2” Allen Bolts
H-Frame
Seat
Support
Leg
Frame
Fig 2
Back
Support
Bar
Slot in back
cushion
Fig 3
3/8” Allen Bolt
Back
Support
Bar
Slot in Leg Frame
Back
Cushion

Recommendation: Retighten all bolts on a seasonal basis to ensure your product
remains strong and stable for many years of use.
Weight Capacity: All guest chairs in this series have a weight capacity of 300 lbs.per
seat unless otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Seating the Way You Want It
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
© 2019 Lesro Industries, Inc. Jan 2019
Assembly Instructions
For Gansett Guest and Oversize Chairs
6. Place second leg frame on top of
assembly, as shown in gure 5. Be
sure back support bar is inserted into
slot in leg frame. Secure using 3/8”
and 1/2” Allen bolts.
7. Return chair to an upright position.
8. Gansett chairs have dual-position
seats. They can be assembled with
or without a cleanout, as shown in the
Seat Options diagram.
9. Attach seat to H-frame using 2” Allen
bolts, as shown in gures 6 and 7. Use
front set of H-frame holes for a seat
with cleanout and use the back set of
holes for a seat without cleanout.
10. Tighten all 12 bolts securely.
11. Your chair is now assembled and ready
to use.
(continued from page 1)
Fig 5
1/2” Allen
Bolts
3/8” Allen
Bolt
Fig 7
Use back set
of holes for
no cleanout
2” Allen
Bolts
2” Allen
Bolts
Fig 6
Use front
set of holes
for cleanout
Seat Options
Without CleanoutWith Cleanout