Letscom ID205L User manual

ID205L
Smart Watch
User Manual
Thank you for purchasing our products. This manual addresses the safety
guidelines, warranty, and operating instructions. Please review this manual
thoroughly before operating your device.

1
1
4
5
8
10
15
16
18
18
English Version
Getting Started ............................................................
Setting up Your Watch.................................................
Wearing Your Watch.....................................................
Using Your Watch.........................................................
Getting to Know Your Watch...................................
.....
Function Introduction.............................................. .....
Basic Specifications ......................................................
FAQs .............................................................................
Warranty ........................................................................
Important Safety Instructions ........................................

What’s in this document
What’s in the box
This manual gets you started quickly with setting up your watch.
Setup ensures that your watch can synchronize its data with the
VeryFitPro app, where you can get detailed information on your
stats, view historical trends, log sleep, and more. As soon as
setup is complete, you’re ready to start moving. The remainder
of the manual walks you through every function on your ID205L.
Smart watch
(ID205L with bands)
Charging cable User manual
ID205L
Smart Watch
User Manual
Thankyou for purchasing our products. This manual addresses the safety
guidelines,warranty, and operating instructions. Please review this manual
thoroughlybefore operating your device.
Getting Started
Setting up Your Watch
- 1 -
Charging your watch
Please fully charge your watch before initial use.
1. Insert the USB plug of the charging cable into the USB port
on your computer or a UL-certified USB wall charger.
2. Hold the other end of the charging cable near the port on the
back of the watch until it attaches magnetically.
3. Make sure the pins on the charging cable lock securely with
the port. The connection is secure when the watch vibrates
and the battery icon with percent charged appears on the
screen.

When the watch shows that the battery is
low, connect the watch to a USB port with
5V-500mA.
While the watch charges, there is a battery
progress bar on the screen and you can
press the function button to check the
battery level.
- 2 -
When the watch shows that the battery is low,
connect the watch to a USB port with
5V-500mA.
While the watch charges, there is a battery
progress bar on the screen and you can press
the function button to check the battery level.
Remove the watch from the power supply once fully charged.


Disassembling / Assembling Your Watch
Disassembly
1. To remove the wristbands, turn over the watch and find the
quick-release lever.
2. While pressing the quick-release lever inward, gently pull the
wristband away from the watch to release it.

- 3 -
3. Repeat on the other side.
Assembly
1. To reattach the wristbands, slide the pin (the side opposite
the quick-release lever) into the notch on the watch. Attach
the wristband with the clasp to the top of the watch.
2. While pressing the quick-release lever inward, slide the other
end of the wristband into place.
3. When both ends of the pin are inserted, release the
quick-release lever.

Wearing Your Watch
- 4 -
All-day wear and exercise
For all-day wear when you’re not exercising, wear the device
on your wrist horizontally, a finger’s width below your wrist
bone and lying flat, the same way you would put on a watch.

1. Experiment with wearing the watch higher on your wrist during
exercise. Because the blood flow in your arm increases the
farther up you go, moving the watch up a couple of inches can
improve the heart rate signal. Also, many exercises such as
bike riding or weight lifting require you to bend your wrist
frequently, which is more likely to interfere with the heart rate
signal if the watch is lower on your wrist.
2. Do not wear your watch too tight. A tight band restricts blood
flow, potentially affecting the heart rate signal. This being said,
the watch should also be slightly tighter (snug but not
constricting) during exercise than during all-day wear.

- 5 -
Using Your Watch
App Installation
Use the watch with our customized VeryFitPro app.
You can download VeryFitPro from Apple Store/Google
Play or scan the QR codes below to download.
VeryFitPro
iOS Android
iOS 8.0 & higher
Android 4.4 & higher
Bluetooth 4.0 & higher
Notes:
The VeryFitPro app is only compatible with smartphones, not
tablets or PCs.
Smartphone operating system should be iOS 8.0 / Android
4.4 or higher; Bluetooth version should be 4.0 or higher.
Smart Phone System Requirements

Device User
Details
Mainpage
(Swipe down the page to sync data
from the watch to your phone)
App Interfaces
- 6 -

- 7 -
Please pair the watch with your phone in the VeryFitPro
app, NOT in the Bluetooth settings of your phone.
①Enable the Bluetooth of your smartphone.
②Open the VeryFitPro app on your smartphone and go to the
"Device" page, tap "Bind Device", then your smartphone
starts searching devices.
③In the list of found devices that appear on your smartphone,
tap on "ID205L" to connect the watch to your smartphone. (If
your phone failed to find ID205L, please search the watch on
your smartphone again.)
Pair the watch with your
smartphone in the VeryFitPro app
Do NOT pair the watch
with your smartphone in
your phone’s Bluetooth
settings
iOS Android
Pairing the Watch with Your Phone
Bind Device
1 2 3

Getting to Know Your Watch
Notes:

automatically search and reconnect itself if the connection is
lost or when Bluetooth is restarted after manual disconnec-
tion.

watch will be reset, and the information on the app will be
cleared. Please do not unbind the connection unless there is
an issue that will require a reset.

pairing, please ensure the watch and your smartphone is
within 0.5 meters distance.
- 8 -
Function Button
Watch Interfaces
This is a touch screen; swipe the screen to go to different
interfaces, and tap to enter the function.
Press the function button to wake the
screen or return to the previous
interface.
Press and hold the function button to
turn on the watch.