LevelOne FCS-1132 User manual

FCS-1132
3-Megapixel PoE Network Camera
User’s Manual
H/W: V1.0

Product name:
FCS-1132
Release Date:
2013/11/27
Manual Revision:
V1.0
Default Settings
IPAddress
DHCP
Username
admin
Password
admin

Table of Contents
Package Contents...................................................................................................................................1
Hardware Device Appearance................................................................................................................1
Hardware Reset .............................................................................................................2
LED Behavior .................................................................................................................3
Extension I/O Terminal Block..........................................................................................4
Hardware Installation......................................................................................................5
Camera Connection........................................................................................................5
Software Installation............................................................................................................................8
Access to the Network Camera...................................................................................................16
Check Network Settings...............................................................................................16
Add Password to prevent Unauthorized Access...........................................................16
Authentication...............................................................................................................17
Installing plug-in............................................................................................................17
Configuration ...................................................................................................................................21
Camera/Video/Audio ....................................................................................................21
Camera.................................................................................................................................21
Video....................................................................................................................................25
Audio....................................................................................................................................28
Privacy Mask Control ..........................................................................................................29
Camera Control...........................................................................................................30
PTZ Configuration...............................................................................................................30
Network.......................................................................................................................31
IP Settings ............................................................................................................................31
UPnP....................................................................................................................................32
DDNS (dynamic domain name service)..............................................................................32
HTTP/HTTPS......................................................................................................................34
Multicast ..............................................................................................................................35
EasyLink ..............................................................................................................................36
Event............................................................................................................................37
Event Settings ......................................................................................................................37
Motion Detection.................................................................................................................43
Digital Input (DI).................................................................................................................44
Audio Detection...................................................................................................................45
Notifications..................................................................................................................46
FTP Settings.........................................................................................................................46
E-mail Settings.....................................................................................................................47

Samba Settings.....................................................................................................................48
HTTP Settings......................................................................................................................49
Digital Output (DO).............................................................................................................50
Audio Clip............................................................................................................................51
Video Clip............................................................................................................................52
VMS Compatibility..............................................................................................................52
SD card ........................................................................................................................53
Storage Management ...........................................................................................................53
Maintenance.................................................................................................................54
Language..............................................................................................................................54
User Management................................................................................................................54
IP Filter ................................................................................................................................55
Firmware Upgrade ...............................................................................................................55
Configuration.......................................................................................................................56
Reset to Default....................................................................................................................57
Reboot..................................................................................................................................57
System.........................................................................................................................58
System Log ..........................................................................................................................58
Date and Time......................................................................................................................59
Save File Folder...................................................................................................................60
Device Information..............................................................................................................60

Package Contents
FCS-1132
CS mount Lens
Camera Stand
Power Adapter
Quick Installation Guide
CD Manual/utility

1
Hardware Device Appearance
Light Sensor
Power
Connector
(DC12V In)
Ethernet RJ45
10/100 Socket
Extension I/O Terminal
Block
PAL or NTSC for Monitor Output
Audio Out
Auto Iris
Connector
USB Port
Audio In
Micro SD slot

2
Hardware Reset
The Reset Button can be used to reboot the camera or restore it to factory default settings. If
the camera experiences a problem, rebooting the camera may correct the problem. If the
problem remains, please restore the camera to factory default settings and reinstall the
software.
To Reboot - Press and hold the Reset Button for one second using a paper clip or thin
object. Wait for the camera to reboot.
To Restore –Press and hold the Reset Button for ten seconds until the LED light turns off.
When successful restored, the LED will be green during normal operation.
Reset Button

3
LED Behavior
Function
LED Behavior
Description
Remark
Status
Hardware
failure
Front Left
(Green)
Status
Steady On
1. Restoring
settings
2. Normal
Operation
Front Left
(Green)
Status
Unlighted
1. Power Off
2. Power On
till System
setup
The LED
can be
configured
to be
unlighted
during
normal
operation
Status
While F/W
upgrading
Front Left
(Green)
Link
Blinking
Blinking
while
network
connection in
progress
Rear Left
(Orange)
Link
Unlighted
No
connection
Rear Left
(Orange)
Power
Steady On
Normal
Operation
Rear Right
(Green)
Power
Unlighted
Power off
Rear Right
(Green)

4
Extension I/O Terminal Block
The Network Camera provides an extension I/O terminal block which is used to connect
external input/output devices. The pin definitions are listed as below.
DI/DO Diagram
Pin
Function
1
Power +5V
2
Digital Output
3
Digital Input
4
Ground
5
RS-485 +
6
RS-485 -

5
Hardware Installation
Camera Connection
Basic Connection (Without PoE)
1.1 If you have external devices such as sensors and alarms, please make
connections with extension I/O terminal block.
1.2 Connect the camera to a switch via Ethernet cable.
1.3 Connect the supplied power cable from the camera to the power outlet.
Please check your product package contains all the accessories listed in the foregoing
Package Contents. Depending on the user’s application, an Ethernet cable may be needed.
The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in
length.
Upon powering up, the power LED will become lighted first and then the device will go
through booting process. The link LED will be steady amber for getting IP address. After
getting IPAddress, the link LED will blink orange while network connection is processing.

6
Power over Ethernet (PoE) Connection
1.1. When connecting to PoE-enabled switch
The camera is PoE compliant and please connects the camera to a PoE-enabled switch
via single Ethernet cable.
1.2. When connecting to a non-PoE switch
Please connect the camera to a non-PoE switch via PoE Injector (optional).

7
System Requirements
Operating System:
Microsoft Windows XP Home Edition SP2
Microsoft Windows XP Professional SP2
Computer:
IBM PC/AT Compatible
CPU:
Pentium 3GHz or faster
Memory:
1024 MB or more
Monitor:
1024 x 768 pixels or more, 24-bit True color or better
Network Interface:
10/100Mbps Network interface card must be installed
Web Browser:
Microsoft Internet Explorer 6.0 SP2 or higher
Adobe Reader:
Adobe Reader 8.0 or higher
Audio:
The audio function will not work if a sound card is not installed in the PC. Audio
may be interrupted depending on network traffic.

8
Software Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant user
access to the camera.
After hardware connection checking, the users can run the Installation Wizard program
included in the product CD-ROM to automatically search for the Network Camera in the
Intranet. There may be many Network Cameras in the local network. Users can differentiate
the Network Cameras with the serial number. The serial number is printed on the labels
on the carton and the bottom of the Network Camera body.
1. Insert the Installation CD into the CD-ROM driver. Click install and shows the welcome
screen. Follow the steps to install the Installation wizard on user’s computer.

9

10

11
2. Do not check the box if user would like to check the hardware installation settings.
Otherwise click “Skip the hardware installation” to skip the hardware connection
checking, the program will automatically search for the Network Camera in the Intranet.
Click “Start” to continue.
3. Select the Network Camera from the survey list and enter the user name and password.

12
The user name and password are assigned as “admin/admin”.
4. Setting the Network Camera IP address.

13
User can either select simple mode or professional mode for network camera IP setting.
If simple mode is selected, the easy configuration program will set up the connection
automatically. If professional mode is selected, the user will need to configure the IP
manually, The DHCP setting is recommended. If user wants to set IP address manually,
please refer to the product user manual.

14
5. Please make sure the internet connection is ready then start to do the internet discovery,
otherwise click “Skip” to finish the setting.
The default domain name is MAC address; you can also register with your own name
on-line.
6. After finish setting, the connection successful or fail showed. If connection failed, user
can either try again or quit the installation. User can either select "Start Web GUI" to
continue or click “X” on the top right of the screen to finish the installation.

15
Once installation is completed, the Administrator should proceed to the next section "Access
to the Network Camera" for necessary checks and configurations.