LevelOne GEP-0523 User manual

1
GEP-0523
Quick Installation Guide
English
Deutsch
Français
Español
Nederlands
Dansk
Italiano
Ελληνικά
Português
Svenska
Slovenščina
繁體中文
한국어
Русский
Polski
GEP-0523 x 1
AC/DC adapter x 1
AC power line x 1
Package Content

2
ENGLISH
Installation
LED Indicator
Connecting Equipment
Step1.Inspect the PowerAdapter carefully, and make
sure that it is properly connected to a power
source.
Step2.Plug-in the PowerAdapter to the Switch.
Step3.Connect your network devices with the switch
by using Ethernet cable. (e.g. Cat-5e)
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

3
Deutsch
Installation
LED-Anzeige
Anschluss der Geräte
Schritt1. Bitte prüfen Sie die korrekte Verbindung
des Netzteils mit der Steckdose.
Schritt2. Verbinden Sie das Netzteil mit dem Switch.
Schritt3. Verbinden Sie weitere Geräte mit dem
Switch unter Verwendung von
Ethernet-Kabeln (z.B.: Cat.5e).
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

4
Français
Installation physique
Indicateur DEL
Branchement de l'équipement
Étape1. Inspectez soigneusement l'adaptateur
secteur et assurez-vous qu'il est
correctement connecté à une source
d'alimentation.
Étape2. Branchez l'adaptateur secteur sur le switch.
Étape3. Connectez vos périphériques réseau au
switch en utilisant un câble Ethernet. (Par
exemple, Cat-5e)
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

5
Español
Instalación física
Indicadores LED
Procedimiento de conexión del equipo
Paso1. Inspeccione el adaptador de corriente
con cuidado, y asegúrese de que está
correctamente conectado a una fuente de
energía.
Paso2. Conecte el adaptador de corriente al
Switch.
Paso3. Conecte sus dispositivos de red con el
switch mediante el uso de cable Ethernet.(Por
ejemplo, Cat-5e).
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

6
Nederlands
Fysieke installatie
Ledindicator
Apparatuur wordt aangesloten
Stap1.Controleer het voedingsapparaat nauwkeurig
en zorg er voor dat het goed op het stopcontact
is aangesloten.
Stap2.Sluit het voedingsapparaat op de switch aan.
Stap3.Sluit de netwerkapparaten op de switch aan
met een Ethernetkabel, bijvoorbeeld Cat 5e.
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

7
Dansk
Fysisk installation
LED indikator
Sammenkobling af udstyr
Step1.Tjek strøm adapteren omhyggeligt og sikker at
den er forbundet til strøm kilde.
Step2.Forbind strøm adapteren med switchen.
Step3.Forbind din netvæ rks enhed med switchen vha.
et ethernet kabel ( f.eks. Cat 5e).
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

8
Italiano
Installazione fisica
Indicatore LED
Equipaggiamento di connessione
Fase1. Controllare l'alimentatore con attenzione
e assicurarsi che sia correttamente collegata
alla sorgente elettrica.
Fase2. Collegare l'alimentatore allo switch.
Fase3. Collegare il proprio dispositivo di rete
allo switch con un cavo Ethernet (ad es.
Cat.5e)
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

9
Ελληνικά
Εγκατάσταση
Ενδεικτική λυχνία
Συνδεδεμένος εξοπλισμός
Βήμα1. Ελέγξτε προσεκτικά τον μετασχηματιστή
τροφοδοσίας και σιγουρευτείτε ότι έχει
συνδεθεί σωστά στην πρίζα ρεύματος.
Βήμα2. Τοποθετήστε το τροφοδοτικό στο Switch.
Βήμα3. Συνδέστε τις δικτυακές σας συσκευές με το
Switch χρησιμοποιώντας καλώδιο δικτύου
(π.χ. καλώδιο κατηγορίας Cat-5e)
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

10
Português
Instalação física
LED indicador
Conectando Equipamento
Passo1.Verifique o adaptador de energia
cuidadosamente, e assegure-se de tê-lo
conectado à tomada corretamente.
Passo2.Conecte o adaptador de energia ao Switch.
Passo3.Conecte seus dispositivos de rede no Switch
utilizando cabos ethernet. (ex. Cat-05e).
Link/Act Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps