LEXIBOOK TMP241 User manual

Congratulations on the purchase of your Lexibook®TM240 series
PERSONAL ASSISTANT. This new PERSONAL ASSISTANT generation
includes many useful features designed to ease the organisation of your daily
schedule and personal information.
The CD-ROM included contains Lexibook’s SyncMan®2 software program for
installation on a personal computer. Together with Internet access, you can
connect to Lexibook’s exclusive Internet services site at https//my.lexibook.com,
which provides both useful and interesting information which can be downloaded
to your personal computer and then synchronised* with your TM240.
* Some information may not always be able to be synchronised with your TM240.
Before you start using the TouchMan®240 Series, you must carefully remove the
static label protecting the LCD display and pull out the plastic battery tab at the
rear of the unit. After you have done this, you need to reset the unit:
1. Insert a blunt object, such as an opened paper clip, into the RESET hole (at the
rear of the unit) and press gently. RESET ? will be displayed on the screen.
2. Press to confirm. Display shows RESET ! during the reset period (just a few
seconds).
3. Then the display shows local time screen.
NOTE: Doing a reset will delete all information stored in the unit as well as the
secret code if unit has been used previously.
Switching the unit on and off:
Press key to switch the unit on or off.
TouchMan®240 PERSONAL ASSISTANT will power-off automatically after
5 minutes if unused.
Battery replacement:
1. Switch your unit off and open the battery cover at the rear of the unit.
2. Replace used battery with a new, high quality CR2032 cell battery with (+)
polarity facing up.
Note: There are 2 batteries. The left one is for the main unit operation. The right
one is for screen backlight. If only the backlight does not work anymore change
only the battery on the right. If the PDA screen contrast is very low or does not
turn ON, then change the left battery and check if the backlight works properly
(before changing the right battery also).
3. Display shows RESET?. Select Nand press or press Nkey to NOT reset
the unit and keep your information stored in the memory.
IMPORTANT! Be sure to complete battery replacement within 1 minute in order
to keep your stored information safe.
Introduction
Copyright © Lexibook 20061

Copyright © Lexibook 2006
2
1.1 Hard key functions
:Searching buttons to move cursor to next screen or next option
or record.
:Moving buttons to move cursor to next line or character.
: Confirm an entry or a selection.
:On/Off
1.2 Membrane key functions
:Displays the Home start up page.
:Toggle key to toggle from alphabetical keypad to numerical keypad.
:Home time, World time and Alarm.
:Contacts
:Scheduler, To Do and Memos.
:Games
:Calculator, Currency Conversions, Unit Conversion.
:Translator (if downloaded)
:PC synchronisation with Lexibook SyncMan®2 software.
1.3 Screen icon functions
1.4 Activating the display background light function
In order to use the display background light function, press and hold the ON/OFF
switch for 3 seconds and release it once a beep is heard. The display will now be
illuminated.
You can select these shortcuts from the Home start up page by using and ,
then press to access directory.
:Contacts
:Home time, World time and Alarm.
:Calculator, Currency Conversions, Unit Conversion.
:Scheduler, To Do and Memos.
:Games
:Translator (if downloaded)
1. Keypad

Copyright © Lexibook 2006
3
1.5Alphabetical keypad
SYM: Symbols and special characters (refer to appendix for table list).
EDIT: Edit record.
DEL: Delete record or last entry from right to left.
INS: Insert a new entry inside a word/number.
SPACE: Type a space
CAPS: Capital letters
12/24: Toggle from 12-hour format (AM/PM) to 24-hour format
(default setting).
DST: Enable Daylight Saving Time. When Summer Time is on, #is
displayed before the day.
MENU: Open Menu function list: Language, Date Format, Memory
check, Contrast, Memory Manager
:Enable or disable key tone.
:Enable secret mode.
AC: Clear All in Calculator mode.
CE: ESC key to cancel operation and go back to previous screen.
Clear entry key in Calculator and Converter mode.
MRC, M-, M+:Memory keys in Calculator mode.
2. Numerical keypad

Copyright © Lexibook 2006
4
3.1 Display language
8 languages are available: English, Français (French), Deutsch (German),
Español (Spanish), Italiano (Italian), Português (Portuguese), Polski (Polish)
and Nederlands (Dutch).
1. Press to display home time.
2. Press to display numerical keypad then press MENU. LANGUAGE?
option is displayed.
3. Press and use and to scroll through language list and select
desired one.
4. Press to confirm.
3.2 Date format
1. Press to display home time.
2. Press to display numerical keypad then press MENU. LANGUAGE?
option is displayed.
3. Use and to scroll through menu option list and select DATE SET.
Press to confirm.
4. Use and to display available date formats: Y/M/D, M/D/Y and
D/M/Y.
5. Press to confirm.
4.1 Home time
1. Press . Select 1. HOME TIME and press to confirm. City name
abbreviation is shown on first line.
2. Press 2nd then press EDIT and use and to scroll through city list
and select matching time zone.
3. If you wish, you can directly type your city name (max. 3 letters) when
matching time zone is displayed. Ex: RIO.
4. Press to move cursor to 2nd line and edit date. Numerical keypad is
automatically displayed.
5. Type current day date then type current time. If you are in 12-hour
format, press AM/PM to toggle from AM (A) to PM (P).
6. Press to confirm.
Available Time zones: Please see appendix 2
4.2 World time
1. Press . Use to select 2. WORLD TIME
2. Use and to scroll through available time zones. Hours and dates
will be automatically set up accordingly.
4. Time
3. User settings

Copyright © Lexibook 2006
5
4.3 Alarm setting
1. Press . Use to select 3. ALARM and press . Your unit offers
three alarm modes:
- Daily alarm: . The alarm(s) will ring every day.
- Hourly chime: . A bell will ring every hour.
- Scheduler alarm (event reminder):
Press to turn Hourly Chime ON, then a small icon appears on the left
of LCD.
Press key to set Alarm ON/OFF then a small icon appears on the left
of LCD.
2. Note that you can set up to 3 different Alarm times: Press and to
select one.
3. Press or once to turn on the alarm .
Press EDIT and input the alarm time in the format “HH-MM”.
4. Press key to switch to next field for selecting alarm tone. There are
9 kinds of alarm tone available. Press your desired digit key 1-9 to listen
to the corresponding musical tone.
5. Press to confirm.
There are two contact directories, PERSONAL and BUSINESS.
1. Press . Press to open 1.PERSONAL directory. Press to select
2.BUSINESS directory and to enter.
2. Once one of the directories is open, press to choose 2.NEW. Then
directly type the contact name and then press to go to ADDRESS
data field.
3. Type contact address (max. 36 characters) then press key to go to
E-MAIL data field.
4. Type contact e-mail address then press key to go to URL data field.
5. Type contact URL then press to move to MOBILE data field.
Numerical keypad is displayed.
6. Type contact mobile phone number then press to move to TEL data
field. Numerical keypad is displayed.
7. Type contact residential telephone number or any other number you
may want to store. TIPS: To store a FAX number you can press 2nd key
and then type “F” key. F will be displayed to remind you this is a FAX
number. Press 2nd key again to return to numerical keypad and enter the
fax number. You can also choose to enter a Pager number; you can then
tap on “P” key and follow same operation as above.
Note: Only F and P alphabetic keys are available in this line.
8. Press to save record.
5. New contact record

Copyright © Lexibook 2006
6
1. Press . Then press to open 1.SCHEDULE mode.
Press to select 2.NEW directory and to enter.
2. Type the schedule description then press key to enter ALARM mode.
Choose Y or N with or and press . Numerical keypad is displayed.
3. Type meeting’s date and time.
4. Press to save record.
1. Press . Press to select 2. MEMO mode then press to open it.
Press to select 2.NEW directory and to enter.
2. Type in Memo description on first line (max. 36 characters).
3. Press to go to second and third lines to enter numbers, if desired.
4. Press to save record.
1. Press and twice to select 3.TO-DO mode and to open it.
Press to select 2.NEW directory and to enter.
2. Type task description then press key to set up priority level, between 1
(highest) to 9 (lowest).
3. Select priority level number by pressing or keys. Then press key
to enter Status of the task.
4. Select P (pending) or D (done) with or . Then press key to enter
Time and due date of the task.
5. Type due date and time.
6. Press to save record.
8.1 Task completed
You have to SEARCH for the task completed and then EDIT it, go to Status
and select D (done)
Please refer to Part " 10. Record searching " and part " 12. Edit a record ".
Capital letters
Press CAP. (Alphabetical keypad) to enable or disable capital letters input.
Numbers
Press to toggle between alphabetical keypad and numerical keypad, whilst
typing.
9. Instructions for character input
8. New To Do record
7. New memo record
6. New schedule record

Copyright © Lexibook 2006
7
Symbols
Press SYM (alphabetical keypad) to display first symbol in the list. Press SYM
repeatedly to scroll through symbol list until desired one is shown.
Accented letters
Press SYM (alphabetical keypad) then desired letter to show its first accent. Type
letter key repeatedly to scroll through all accents.
E.g.: Press SYM then Eto display é(lower case mode) or É(upper case mode).
Refer to appendix to view accented letters.
Cancel operation without saving data
Press to display numerical keypad then press CE.
Correct input
Use and keys to move cursor to desired character to edit then type desired
character.
Insert character
Move cursor to desired place and press INS (alphabetical keypad) to insert a
blank. Type desired character.
Delete character
Press DEL to delete last entry (from right to left). DEL is on the alphabetical key-
pad.
Contact records are sorted in ascending alphabetical order using Contact name.
Scheduler records are sorted in chronological order.
•Sequential search
Open desired mode:
- PERSONAL CONTACTS or BUSINESS CONTACTS in the Phonebook after
you pressed .
- SCHEDULER, TO-DO or MEMO in the Agenda after you pressed
1.SEARCH will be displayed. Press to enter Search mode.
Press or to search for desired record.
If no record is found, display shows NOT FOUND!.
•Direct search
Open desired mode as instructed above.
Then type the first letters of contact name or description and press or
keys to display matching records.
If no record is found, display shows NOT FOUND!.
10. Record searching

Copyright © Lexibook 2006
8
Once desired record is displayed, press and to scroll left or right.
For contact records, press to view other data fields displayed on first line:
Names, Address, E-mail, URL.
1. Once desired record is displayed, press EDIT (alphabetical keypad) and
use and keys to move cursor to desired place.
2. Insert a character by pressing INS key or delete a character by pressing DEL
key.
3. Press key to move to other data fields to edit or fill.
4. When you have completed editing your record, press to confirm.
1. Once desired record is displayed, press DEL (alphabetical keypad).
2. Display shows DELETE?. Press or Yto confirm or press N or select N
with Right arrow and press to escape deletion.
You can set up a password to protect your Contacts, Scheduler, To Do and Memo
records. Password cannot exceed 6 characters (only alphanumeric characters, no
symbols).
WARNNG! If you forget your password you will not be able to view your data or
enter new records and you will be forced to reset the unit. Resetting
the unit will lose all your data!
Set up a password
1. Press and press when you see 1.HOME TIME to enter home time.
2. Numerical keypad is displayed, then press . PASSWORD ? is displayed.
3. Type your password (maximum 6 characters) and press .
Press to display alphabetical keypad if you wish to type letters.
4. Display shows RECONFIRM !.
5. Type your password again and press to confirm. Secret mode is now
enabled and secret icon is displayed on the left of the screen.
14. Secret mode
13. Delete a record
12. Edit a record
11. View a record

Copyright © Lexibook 2006
9
Edit password
1. Press and press when you see 1.HOME TIME to enter home time.
2. Numerical keypad is displayed, then press . PASSWORD ? is displayed.
Type your current password and press . Display shows EDIT ?.
3. Press . Display shows current password and cursor is flashing on first
character.
4. Insert character by pressing INS or delete character by pressing DEL
(max. 6 characters). Press to confirm.
5. Display shows RECONFIRM !. Type new password again and press .
Opening modes when password is enabled
First time you press or keys to view data, display will show PASSWORD?.
Type your password and press to confirm.
Press then 1.CALCULATOR is selected, press to enter Calculator mode.
Carry out the necessary calculation.
Set up currency conversion
1. Press . Press once to select 2.CURRENCY, press . First currency
conversion is displayed: EURO USD. There are 5 currency conversions.
2. Use or keys to scroll through currency conversion list and select
desired one.
3. Press 2nd to access alphabetical keypad and press EDIT.
4. Cursor is flashing on first character of source currency. Change source
currency name if needed (max. 4 characters) then press to change target
currency name if needed. Press to confirm.
5. If you don’t need to change currency names, press straight after
pressing EDIT.
6. Zero is flashing on last line. Type currency rate (e.g.: for EURO USD, type
1.089 if 1 Euro = 1.089 US$).
7. Press to confirm.
Perform a conversion
1. Select desired currency conversion. E.g.: EURO USD.
2. Type amount to convert.
If it is a Euro amount, press to view US$ result.
If it is a US$ amount, press to view Euro result.
16. Currency conversion
15. Calculator

Copyright © Lexibook 2006
10
Perform a conversion
1. Press . Press once to select 3.METRIC, press . First unit
conversion is displayed inch cm with its conversion rate 2.54. There are
8 pre-stored unit conversions.
2. Press or to select desired conversion. Ex : mile km .
3. Type amount to convert.
If it is a mile amount, press to view km result.
If it is a km amount, press to view mile result.
Available unit conversions
inchcm (inches and centimetres) ; yardmetres (yards and metres) ;
milekm (miles and kilometres) ; CF(Celsius and Fahrenheit) ; ftmetres
(feet and meters) ; ozg (ounces and grams) ; lbkg (pounds and kilograms) ;
US gall(US gallons and litres) ; UK gall(UK gallons and litres)
This operation will delete all your data and your password.
1. Insert a blunt object, such as an opened paper clip, in RESET hole at the rear
of the unit and press gently. Display shows RESET?.
2. Press to confirm or N to escape.
1. Press MENU from the numerical keypad (press if alphabetic keyboard is
displayed).
2. Press twice, to select 3.MEMORY?.
3. Press , the % of free available space left is displayed.
Required PC configuration
Your PC must have the following configuration to run Lexibook SyncMan®2
software properly:
•Windows®98SE (second edition), Windows®ME, Windows®2000, Windows®
XP.
•Microsoft®Internet Explorer®version 5.0 or above.
•32MB RAM (for Internet Explorer).
•10MB free space on your hard drive.
•SVGA colour screen.
•One free USB port.
20. PC Synchronisation with SyncMan®2 software
19. Memory check
18. Reset
17. Unit and Metric conversion

Copyright © Lexibook 2006
11
Installation of SyncMan®2
1. Close all Windows programs.
2. Insert the SyncMan®2 CD in your CD-ROM drive.
3. The CD-ROM starts up automatically.
4. Follow the instructions on the screen to complete the installation and read
SyncMan2®detailed Help Files to fully enjoy all the software features.
SyncMan®2 detailed Help Files
1. Make sure that Lexibook SyncMan®2 software is installed on your PC as
explained above.
2. Launch SyncMan®2 software.
3. On the left Main Menu choices, click on “Help” (under “Options”).
4. The html document " Syncman2 help files " will be displayed in a new browser
window.
Using and installing the USB cable
The USB cable will allow you to link your PDA with a PC. However, it needs to have
its driver installed. This driver is on the SyncMan®2 CD-ROM. Please insert it in
your CD drive. If the CD-ROM starts up automatically cancel the installation.
1. Connect the USB cable, included with your unit, to a free PC USB port then
insert cable jack into the unit’s socket (on top left side).
2. Your computer will automatically launch a “Found New Hardware” wizard.
3. Select Choice 2 “Install from a list or specific location” (Advanced). Click NEXT
button.
4. A new window appears. Make sure that first choice by default is selected
“Search for the best driver in these locations” and tick only “Search removable
media (floppy, CD-ROM…)”. Then click NEXT button.
5. You should have a confirmation screen saying that the software you are
installing for this hardware is named “Megawin USB-UART Bridge Controller”.
Click , Next or Continue Anyway if you see a warning message.
6. The installation should complete automatically, please follow prompts on your
screen.
NOTE: For your reference, the software location on the CD-ROM is:
- "\Drivers\TM240\NT_W2K_XP" if your Operating system is Windows®NT, 2000
or XP
- "\Drivers\TM240\98_ME" if your operating system is Windows®98SE or
Millennium
Prior to performing your first synchronisation, make sure that Lexibook®
SyncMan®2 software is installed on your PC as above.
1. Connect the cable, included with your unit, to a free PC USB port then insert
cable jack into the unit’s socket (on top left side). Please make sure to have
installed the USB cable before.
21. Before synchronising

Copyright © Lexibook 2006
12
2. Start SyncMan®2 software on your PC and check whether synchronisation
mode is set up for TCM PDA by clicking on Tools, Options then Your Device
tab.
Perform synchronisation
Start SyncMan®2 and make sure your unit is connected to your PC. Then press
the on your unit to start Synchronisation.
The unit will show LINKING … whilst synchronisation is in progress.
If you have set up a password, you will be required to enter it at this time to
perform synchronisation.
777 Game
1. Press . Press to select 1.777 GAME. Then main game screen is
displayed and $ 10 blinks on the first line. $10 is the minimum wager. On
second line there is default total money, 490.
2. Set desired wager amount by pressing either or and press to start
game.
3. If you get a 777 result you win five times the wager! If you get a  result
you win three times the wager. If you get a ☺☺☺☺☺☺result you win twice the
wager.
4. If you get any other result, you lost your wager.
5. Maximum money amount you can win is 9990. If you reach 0, game is over.
Good luck!
Hammer
1. Press . Press and to select 2.HAMMER. Then game level is
displayed, use or to set desired difficulty. Press to start game.
2. HAMMER 000 is displayed on first line, this is your score. On the second line
your hammer is displayed. You can move it by using or and you can
knock with it by pressing .
3. The goal is to hit the evil mushrooms growing from the bottom line. If the
mushrooms hit the hammer line you lose the game. Your score will increase
after each hit.
Keyboard Wiz
1. Press . Press twice and to select 3.KEYBOARD WIZ. Then game
level is displayed, use or to set desired difficulty. Press to start game.
2. A series of letters scroll on the screen: The number or the letter will disappear
when you press on the corresponding key on the virtual keyboard. However, it
remains on the display if you press a wrong key.
The speed increases each time you get 12 numbers or letters correct. When
the screen displays 12 characters, you lose the game.
3. If you succeed through the 20 levels, “You Win!” will be displayed on the
screen. The screen returns to level 01.
22. Games

Copyright © Lexibook 2006 13
NOTE: The translator is NOT in the PDA by default. You can choose whether
or not to download it yourself from the CD-ROM using SyncMan®2 download
function (please refer to the SyncMan®2 Help Files on the CD-ROM). If you
do so this application will take 90KB out of your 512KB available memory.
1. If the application has been downloaded onto the PDA, press key, and select
the Translator application by pressing .
2. Six different languages can be translated from and to each other: English
(ENG), German (DEU), Spanish (SPA), French (FRA), Italian (ITA) and Dutch
(NED).
3. ENG-> DEU is displayed. The flashing word indicates the language at the side
that can be selected.
At start by default, the source language is ENG (English), and the target
language is DEU (German).
* Press or key to switch between source and target language.
* Press key or to change and select different source or target
language, press to confirm the language selected.
Note: If same source and target language are selected ERROR! will be
displayed.
4. Press key to enter the translation function. You can key in the word to be
translated on the first line after source language name. Press to get the
translation in the target language on the second line.
Note: If there are no matched words, Not Found! will display for a few
seconds, however a few seconds later, the nearest index words will appear.
5. When translation words appear, press or key to view the previous or
next index word and its translation.
6. If the translation or index words are longer than 12 characters, press or
key to view them.
1. Avoid extremes in temperature, exposure to direct sunlight, water, humidity
and dust.
2. Do not drop the device as this may damage it.
3. Do not use detergent, liquid cleaners or solvents to clean unit. Wipe unit with
clean, soft dry cloth.
4. Keep unit away from strong magnetic fields (e.g. loudspeakers), and any other
static electricity source
5. Do not attempt to dismantle unit. There are no user serviceable parts inside
and any attempt to do so will render the warranty void.
6. We strongly recommend that your keep a written record of all important data.
In almost any electronic memory system, data can be lost under certain
circumstances. We therefore accept no liability for loss of data whether this is
caused by incorrect use, repairs, error, changing batteries, using batteries after
they have expired or other circumstances. Keep regular backups of your PC
Data.
24. Care and safety
23. Translator
Downloading the translator software:
1. From the supplied Syncman CD, click on the file download option.
2. First, click on “New”, and then on “Import”
3. Follow the link: CD:/Downloads/Translator
4. Once you have selected "Translator", search for files with a * tsk extension.
5. The Translator.txt file will appear in the list, click on this file and then open it.
6. Name and save the file so that it shows in your list.
7. You can now start the synchronization from your digital personal assistant.

Copyright © Lexibook 2006
14
7. We do not accept any direct or indirect liability for financial losses or claims
from third parties, which result from using this product and all its functions,
such as stolen credit card numbers, loss or modification of data.
DO NOT dispose of old batteries by throwing into a fire. They may
explode and cause serious injury. ALWAYS dispose of batteries
carefully.
DO NOT leave batteries in unit for extended periods of non-use as they
may leak and cause irrevocable damage to your unit. This will
invalidate your warranty.
Note:
a) Non-rechargeable batteries are not to be recharged.
b) Different types of batteries or new and used batteries are not to be mixed.
c)
Only batteries to the same or equivalent type as recommended are to be used.
d) Batteries are to be inserted with the correct polarity.
e) Exhausted batteries are to be removed from the product.
f) The supply terminals are not to be short-circuited.
If in doubt consult your local stockist or ring the helpline for further information.
Warning: If this product receives an electrostatic shock it may cease to function.
To re-start the unit open the battery door (if applicable to this device) and reset, or
alternatively remove batteries and put them back in.
Battery: 2 x CR2032
Dimensions: 105.5 x 76.3 x 11.5 mm
Weight: 70g
Warranty: 2 years
Memory size: 512KB for TM240 - 1MB for TM241
Specifications are subject to change without notice.
This product is covered by our comprehensive 2 years warranty*. In case of any
fault, please return the unit to your original place of purchase for replacement or
repair. A copy of your sales receipt must be included as proof of purchase.
Our warranty covers material or installation-related defects attributable to the
manufacturer, with the exception of wear caused by failure to follow the
instructions for use or any unauthorized work done on the equipment (such as
dismantling, exposure to heat or damp, etc.).
*Excludes deterioration of the LCD screen.
Freephone customer service: 0808 100 3015
26. Warranty
25. Technical specifications

Copyright © Lexibook 2006
15
Appendix 1 – Symbol table list
Appendix 2 – Accented letters
A:
a:
E:
e:
O or o:
I or i:
U or u:
R or r:
Z or z:
Yor y:
S or s:
D or d:
N or n:
G or o:
C or c:
27. Appendix
! # $ & ( ) * + , . / : <
= > ? @ \ _ ~ £ ¥ æ ¡ ¿ Æ
Ø ø ^ - x ÷ ‘ ' ß
;€%← → “ ”

Copyright © Lexibook 2006
16
TIME ZONE
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
CITY NAME
LISBON
LONDON
AMSTERDAM
BARCELONA
BERLIN
MADRID
PARIS
ROME
CAIRO
HELSINKI
MOSCOW
RIYADH
TEHRAN
DUBAI
KABUL
KARACHI
DELHI
DHAKA
YANGON
BANGKOK
BEIJING
HONG KONG
SINGAPORE
TOKYO
ADELAIDE
GUAM
SYDNEY
NOUMEA
AUCKLAND
WELLINGTON
TONGA
MIDWAY ISLANDS
HONOLULU
ANCHORAGE
LOS ANGELES
DENVER
CHICAGO
NEW YORK
TORONTO
CARACAS
RIO DE JANEIRO
MID ATLANTIC
AZORES ISLANDS
ABBREVIATION
LIS
LON
AMS
BCN
BER
MAD
PAR
ROM
CAI
HEL
MOW
RUH
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
BEI
HKG
SIN
TYO
ADL
GUM
SYD
NOU
AKL
WLG
TNG
MID
HNL
ANC
LAX
DEN
CHI
NYC
YYZ
CCS
RIO
MAT
AZO
TIME DIFFERENCE
+0
+0
+1
+1
+1
+1
+1
+1
+2
+2
+3
+3
+3.5
+4
+4.5
+5
+5.5
+6
+6.5
+7
+8
+8
+8
+9
+9.5
+10
+10
+11
+12
+12
+13
-11
-10
-9
-8
-7
-6
-5
-5
-4
-3
-2
-1
Appendix 3 – World Cities and Time Zones

Copyright © Lexibook 2006 17
In order to fully uninstall any lexibook component from your PC, proceed as
follows:
- Uninstall the SyncMan application software by clicking on Start ->
Control panel -> Add or remove programs.
- Manually delete the "lexibook" folder from the "program files" folder located in
your "C:" drive.
- Disconnect the TMP241 from the USB port and restart your PC.
- Access the “Device manager” menu (right-click on “My Computer” and then
select “Properties”) in order to select the TMP241 controller located in the "USB
Universal serial bus controller" menu, and click on "Properties". Select the
"Controller" tab and click on "Details". In the new window that opens, make a
note of the controller file name, as well as its location folder. Close the controller
“Details” window. Close the “Properties” window of the TMP241 controller. From
the “Device manager” menu, select once again the controller for the TMP241 and
delete it (use the “Delete" and click to confirm when required by the system).
- Restart your PC without having connected the Touchman.
- Manually delete the controller file from the folder previously noted down, and
restart the PC.
Reinstalling the software from scratch:
- Connect the TMP241 (which should be on) to the USB port and wait until
Windows 98 detects the new hardware on the USB port used by your TMP241.
- If the operating system does not detect your TMP241, try a different USB port.
- Once Windows wizards prompts you to select an option, tick "I will select the
driver to install” and click on “Browse” to search and select the file from the folder
"USB driver" in your SyncMan CD.
- Once the driver has been installed (acknowledge by Windows once you click on
“Finish” in the last dialog box that appears), restart your PC making sure that the
TMP241 is on.
- Insert the SyncMan CD and proceed with the installation.
- Restart your PC for the last time.
- Launch the SyncMan application. During the preparation stages prior to use the
software, make sure that you select the TMP241 as pocket device.
- Finally, request the synchronization function from your TMP241.
- The data will be transferred from Syncman to the pocket device and vice versa.
28. Driver installation
Environmental Protection
Unwanted electrical appliances can be recycled and should not be discarded
along with regular household waste! Please actively support the conservation
of resources and help protect the environment by returning this appliance to a
collection centre (if available).
Lexibook uk Ltd
Unit 10 Petersfield Industrial Estate
Bedford Road, Petersfield
Hampshire, GU32 3 QA
UK
Hotline: [phone]
www.lexibook.com