Lexmark C746 User manual

Menu map
Menus list
Supplies Menu Paper Menu Reports Settings
Replace Supply
Cyan Cartridge
Magenta Cartridge
Yellow Cartridge
Black Cartridge
Cyan Photoconductor
Magenta Photoconductor
Yellow Photoconductor
Black Photoconductor
Waste Toner Bottle
Fuser
Transfer Module
Default Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Universal Setup
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
Print Directory
Asset Report
General Settings
Flash Drive Menu
Print Settings
Security Network/Ports Help
Miscellaneous Security Settings
Confidential Print
Disk Wiping1
Security Audit Log
Set Date and Time
Active NIC
Standard Network or Network [x]2
Standard USB
Parallel [x]
Serial [x]
SMTP Setup
Print All Guides
Color Quality
Print Quality
Printing Guide
Media Guide
Print Defects Guide
Menu Map
Information Guide
Connection Guide
Moving Guide
Supplies Guide
1This menu appears only when a printer hard disk is installed.
2Depending on the printer setup, this menu appears as Standard Network, Wireless Network or Network [x].
Menu map
Page 1 of 3

Using the four-arrow-button printer control panel
1345
6
87 910
12
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQR
8
STU
9
WXYZ
0
2
Use the To
1Display View the printer status.
Allow printer setup and operation.
2Select button Submit changes made in the printer settings.
3Navigation buttons Scroll up and down or left and right.
4Keypad Enter numbers, letter, or symbols.
5Sleep button Enable Sleep mode.
The following are the statuses based on the indicator light and the Sleep button:
•Entering or waking from Sleep mode
–The indicator light is illuminated solid green.
–The Sleep button is unilluminated.
•Operating in Sleep mode
–The indicator light is illuminated solid green.
–The Sleep button is illuminated solid amber.
•Entering or waking from Hibernate mode
–The indicator light is illuminated solid green.
–The Sleep button is illuminated blinking amber.
•Operating in Hibernate mode
–The indicator light is unilluminated.
–The Sleep button is blinking amber for 0.1 second, and then goes completely unilluminated for
1.9 seconds in pulsing pattern.
The following actions wake the printer from Sleep mode:
•Pressing any hard button
•Opening Tray 1 or loading paper in the multipurpose feeder
•Opening a door or cover
•Sending a print job from the computer
•Performing a power‑on reset with the main power switch
•Attaching a device to a USB port
6Stop/Cancel button Stop all printer activity.
Note: A list of options is displayed once Stopped appears on the display.
7Back button Return to the previous screen.
8Home button Go to the home screen.
Menu map
Page 2 of 3

Use the To
9Indicator light Check the status of the printer.
•Off—The printer is off.
•Blinking green—The printer is warming up, processing data, or printing.
•Solid green—The printer is on, but idle.
•Blinking red—The printer requires operator intervention.
10 USB port Connect a flash drive to the printer.
Menu map
Page 3 of 3