Lexmark MS310 4514-220 User manual

MS310
4514-220, -230
Service Manual
•Start diagnostics
•Maintenance
•Safety and notices
•Trademarks
•Index
July 12, 2018 www.lexmark.com
P/N 12G2991

Product information
Product name:
Lexmark MS310
Machine type:
4514
Model(s):
220, 230
Edition notice
July 12, 2018
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement
may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information
herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described
may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available
in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that
product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any
existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products,
programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
Trademarks
Lexmark and the Lexmark logo are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer
commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language.
This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions
corresponding to the commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
All other trademarks are the property of their respective owners.
© 2017 Lexmark International, Inc.
All rights reserved.
P/N 12G2991
4514-2xx

Table of contents
Product information......................................................................................2
Edition notice.................................................................................................2
Notices, conventions, and safety information......................................... 11
Laser notice...........................................................................................................................................................11
Conventions.........................................................................................................................................................14
Safety information.............................................................................................................................................. 14
General caution statements........................................................................................................................... 20
Change history.............................................................................................21
Change history....................................................................................................................................................21
General information................................................................................... 25
Media guidelines............................................................................................................................................... 25
Paper guidelines.......................................................................................................................................................... 25
Using recycled paper and other oce papers.................................................................................................... 27
Using specialty media................................................................................................................................................ 28
Supported paper sizes, types, and weights......................................................................................................... 30
Data security notice..........................................................................................................................................32
Tools required for service................................................................................................................................33
Diagnostics and troubleshooting............................................................. 35
Troubleshooting overview.............................................................................................................................. 35
Performing the initial troubleshooting check....................................................................................................... 35
Power‑on reset (POR) sequence............................................................................................................................. 35
Understanding the printer control panel.....................................................................................................36
Using the printer control panel................................................................................................................................ 36
Light sequences and error messages ....................................................................................................................37
Light sequences ...........................................................................................................................................................37
Status screens...............................................................................................................................................................37
Status messages.......................................................................................................................................................... 38
User attendance messages...................................................................................................................................... 39
Paper jams...................................................................................................................................................................... 41
Service errors ............................................................................................................................................................... 42
Fixing print quality issues................................................................................................................................ 43
Initial print quality check............................................................................................................................................ 44
Gray background or toner fog check..................................................................................................................... 45
4514-2xx
Table of contents
3

Blank pages check.......................................................................................................................................................47
Print is too dark check................................................................................................................................................ 53
Print is too light check................................................................................................................................................ 55
Paper curl check.......................................................................................................................................................... 57
Folded or wrinkled paper check ............................................................................................................................. 59
Solid black pages check............................................................................................................................................60
Repeating defects check........................................................................................................................................... 63
Skewed print check .................................................................................................................................................... 64
Streaked vertical lines appear on prints check ................................................................................................... 66
Horizontal light bands check.................................................................................................................................... 67
Vertical light bands check......................................................................................................................................... 68
Vertical dark bands check......................................................................................................................................... 69
Vertical dark streaks with print missing check .................................................................................................... 70
White streaks and voided areas check ..................................................................................................................73
Fine lines are not printed correctly (specifically Chinese characters) check .............................................. 75
Clipped pages or images check.............................................................................................................................. 76
Compressed images appear on prints check...................................................................................................... 78
Incorrect margins on prints check .......................................................................................................................... 79
Toner rubs o check...................................................................................................................................................80
Toner specks appear on prints check..................................................................................................................... 81
Paper jams...........................................................................................................................................................83
Avoiding jams............................................................................................................................................................... 83
Accessing jam areas................................................................................................................................................... 84
[x]‑page jam, open front door. [20y.xx] .................................................................................................................. 85
[x]‑page jam, clear standard bin. [20y.xx].............................................................................................................. 87
[x]‑page jam, open rear door. [20y.xx].................................................................................................................... 88
[x]‑page jam, remove tray 1 to clear duplex. [23y.xx] ......................................................................................... 89
[x]‑page jam, open tray 1. [241.xx]............................................................................................................................90
[x]‑page jam, open tray [2]. [242.xx] ........................................................................................................................ 91
[x]‑page jam, clear manual feeder. [250.xx].......................................................................................................... 92
200 paper jams............................................................................................................................................................ 93
201 paper jams............................................................................................................................................................. 98
202 paper jams............................................................................................................................................................99
23y paper jams .......................................................................................................................................................... 100
241 paper jams............................................................................................................................................................102
242 paper jams...........................................................................................................................................................104
25y paper jams ...........................................................................................................................................................107
Understanding the printer messages.........................................................................................................108
Cartridge, imaging unit mismatch [41.xy]..............................................................................................................108
Cartridge low [88.xx]..................................................................................................................................................108
Cartridge nearly low [88.xy].....................................................................................................................................108
Cartridge very low [88.xy] ........................................................................................................................................108
Non-Lexmark cartridge, see User’s Guide [33.xy] .............................................................................................108
Replace cartridge, 0 estimated pages remain [88.xy]......................................................................................109
4514-2xx
Table of contents
4

Replace cartridge, printer region mismatch [42.xy]...........................................................................................109
Reinstall missing or unresponsive cartridge [31.xy]...........................................................................................109
Replace unsupported cartridge [32.xy] ................................................................................................................109
Imaging unit low [84.xy] .............................................................................................................................................110
Imaging unit nearly low [84.xy] ................................................................................................................................110
Imaging unit very low [84.xy]....................................................................................................................................110
Non-Lexmark imaging unit, see User’s Guide [33.xy]........................................................................................110
Replace imaging unit, 0 estimated pages remain [84.xy].................................................................................110
Reinstall missing or unresponsive imaging unit [31.xy]......................................................................................110
Replace unsupported imaging unit [32.xy]...........................................................................................................110
Change media...............................................................................................................................................................111
Incorrect paper size, open [paper source] [34].....................................................................................................111
Load media ...................................................................................................................................................................112
Remove paper from standard output bin..............................................................................................................112
Network [x] software error [54] ................................................................................................................................112
Standard network software error [54]....................................................................................................................112
Standard parallel port disabled [56].......................................................................................................................113
Standard USB port disabled [56].............................................................................................................................113
Insucient memory to collate job [37]...................................................................................................................114
Insucient memory to support Resource Save feature [35]............................................................................114
Memory full [38] ...........................................................................................................................................................114
Complex page, some data may not have printed [39] ......................................................................................114
Too many trays attached [58]...................................................................................................................................114
User attendance messages (0-99.99).........................................................................................................115
User attendance messages (0‑99.99) ...................................................................................................................115
Unresponsive toner cartridge service check.......................................................................................................117
Unsupported toner cartridge service check ........................................................................................................118
Printer/cartridge mismatch service check ............................................................................................................118
Unsupported imaging unit service check .............................................................................................................119
Imaging unit smart chip contact service check ...................................................................................................119
Toner smart chip compatibility service check.....................................................................................................120
Imaging chip compatibility service check............................................................................................................120
Media size mismatch service check.......................................................................................................................121
Supplies mismatch service check..........................................................................................................................122
Insucient memory service check ........................................................................................................................122
Flash full service check.............................................................................................................................................123
Imaging unit low service check ..............................................................................................................................123
Toner cartridge low service check.........................................................................................................................124
Printer hardware errors.................................................................................................................................. 125
111 errors........................................................................................................................................................................125
121 errors.......................................................................................................................................................................127
126 errors......................................................................................................................................................................129
132 errors......................................................................................................................................................................130
133 errors.......................................................................................................................................................................131
4514-2xx
Table of contents
5

140 errors......................................................................................................................................................................132
155 errors......................................................................................................................................................................133
Procedure before starting the 9yy service checks ...........................................................................................134
900 errors ....................................................................................................................................................................136
912 errors.......................................................................................................................................................................141
94y errors ......................................................................................................................................................................141
950–958 errors ...........................................................................................................................................................141
959 errors.....................................................................................................................................................................144
96y errors.....................................................................................................................................................................145
97y errors .....................................................................................................................................................................146
98y errors .....................................................................................................................................................................147
99y errors.....................................................................................................................................................................148
Input option hardware errors........................................................................................................................149
321–344 errors............................................................................................................................................................149
Other symptoms...............................................................................................................................................153
Base printer symptoms.............................................................................................................................................153
Cooling fan service check........................................................................................................................................153
Dead machine service check..................................................................................................................................154
Controller board service check ..............................................................................................................................155
Control panel service check....................................................................................................................................156
USB print service check ...........................................................................................................................................156
Network service check .............................................................................................................................................157
Service menus............................................................................................161
Navigating through the Service menus...................................................................................................... 161
Diagnostics menu............................................................................................................................................. 161
Entering the Diagnostics menu ...............................................................................................................................161
Print Diagnostics Menu Instruction Sheet.............................................................................................................161
Print Quality Pages......................................................................................................................................................161
License List ..................................................................................................................................................................162
Defaults.........................................................................................................................................................................162
Edge to Edge...............................................................................................................................................................162
Continuous Tray 1 Simplex Print Test ....................................................................................................................162
Continuous Tray 1 Duplex Print Test......................................................................................................................163
Continuous Tray 2 Simplex Test .............................................................................................................................163
Continuous Tray 2 Duplex Print Test.....................................................................................................................163
Par 1 Strobe Adj...........................................................................................................................................................163
Print Event Log............................................................................................................................................................163
Auto Dark Adj ..............................................................................................................................................................163
Mark History.................................................................................................................................................................163
History Mode ...............................................................................................................................................................164
Configuration menu.........................................................................................................................................164
Entering the Configuration menu...........................................................................................................................164
4514-2xx
Table of contents
6

Print Configuration Menu Instruction Sheet ........................................................................................................164
Restore Base ...............................................................................................................................................................164
Restore STD NET........................................................................................................................................................164
Hex Trace......................................................................................................................................................................165
Print Quality Pages.....................................................................................................................................................165
A5 Loading...................................................................................................................................................................165
Reduced Curl...............................................................................................................................................................165
Demo Mode .................................................................................................................................................................165
Auto CR after LF .........................................................................................................................................................166
Auto LF after CR .........................................................................................................................................................166
Energy Conserve........................................................................................................................................................166
Wipe All Settings ........................................................................................................................................................166
Font Density.................................................................................................................................................................166
Font Sharpening .........................................................................................................................................................167
Parallel Protocol..........................................................................................................................................................167
Parallel Mode 2 ...........................................................................................................................................................167
MAC Binary PS ............................................................................................................................................................167
USB Speed...................................................................................................................................................................167
USB PnP........................................................................................................................................................................167
Set Network Card Speed .........................................................................................................................................168
Entering Invalid engine mode...................................................................................................................... 168
Entering Recovery mode............................................................................................................................... 168
Service engineer menu..................................................................................................................................169
Accessing the service engineer (SE) menu.........................................................................................................169
Service engineer (SE) menu ....................................................................................................................................169
Parts removal..............................................................................................171
Removal precautions........................................................................................................................................171
Data security notice....................................................................................................................................................171
Handling ESD‑sensitive parts..................................................................................................................................172
Controller board/control panel replacement ......................................................................................................172
Restoring the printer configuration after replacing the controller board .................................................... 173
Restoring solutions, licenses, and configuration settings ...............................................................................176
Updating the printer firmware ................................................................................................................................ 177
Ribbon cable connectors .........................................................................................................................................178
Zero Insertion Force (ZIF) connectors..............................................................................................................178
Horizontal top contact connector .....................................................................................................................179
Horizontal bottom contact connector ..............................................................................................................182
Vertical mount contact connector.....................................................................................................................185
Horizontal sliding contact connector ...............................................................................................................188
Low Insertion Force (LIF) connector ..................................................................................................................191
Printhead assembly mechanical adjustment ......................................................................................................192
Removal procedures.......................................................................................................................................193
4514-2xx
Table of contents
7

Left side removals............................................................................................................................................194
Left cover removal .....................................................................................................................................................194
Main drive gearbox removal....................................................................................................................................195
MPF solenoid removal ..............................................................................................................................................197
MPF gearbox removal ............................................................................................................................................. 200
Reverse solenoid removal ......................................................................................................................................203
ACM clutch removal..................................................................................................................................................204
Cartridge gearbox removal.................................................................................................................................... 206
Duplex gear assembly removal .............................................................................................................................207
Right side removals........................................................................................................................................209
Right cover removal................................................................................................................................................. 209
Cooling fan duct removal....................................................................................................................................... 209
Cooling fan removal................................................................................................................................................. 209
Controller board removal .........................................................................................................................................210
Toner cartridge smart chip contact removal .......................................................................................................212
Front removals..................................................................................................................................................214
Left front mount removal..........................................................................................................................................214
Right front mount removal .......................................................................................................................................216
Transfer roll removal..................................................................................................................................................218
Cartridge plunger removal.......................................................................................................................................219
Bezel removal.............................................................................................................................................................222
Nameplate removal...................................................................................................................................................223
Control panel assembly removal...........................................................................................................................223
UICC removal .............................................................................................................................................................225
MPF assembly removal............................................................................................................................................226
MPF pick roller cover removal ...............................................................................................................................229
MPF pick roller removal...........................................................................................................................................229
Bail removal ................................................................................................................................................................230
Jam access cover removal .....................................................................................................................................230
Front door removal ....................................................................................................................................................231
Front access cover removal ...................................................................................................................................234
Front door sensor removal .....................................................................................................................................234
Front input guide removal.......................................................................................................................................235
Separator pad removal ............................................................................................................................................237
Bottom removals.............................................................................................................................................239
Power supply removal..............................................................................................................................................239
Power supply shield removal .................................................................................................................................240
Duplex removal...........................................................................................................................................................241
Duplex sensor and input sensor removal...........................................................................................................242
Toner density sensor removal................................................................................................................................244
Trailing edge sensor removal.................................................................................................................................246
ACM assembly removal............................................................................................................................................251
Rear side removals.........................................................................................................................................256
Dust cover removal...................................................................................................................................................256
4514-2xx
Table of contents
8

Rear door and cover removal.................................................................................................................................256
Narrow media/bin full sensor removal.................................................................................................................257
Redrive assembly removal......................................................................................................................................259
Redrive shaft removal.............................................................................................................................................. 260
Fuser removal.............................................................................................................................................................262
Top side removals...........................................................................................................................................263
Top cover removal.....................................................................................................................................................263
Laser scanning unit (LSU) removal .......................................................................................................................264
250/550-sheet tray removals......................................................................................................................266
Pick roller removal.....................................................................................................................................................266
Separator roll assembly removal...........................................................................................................................267
ACM assembly removal...........................................................................................................................................269
Component locations...............................................................................273
Exterior locations.............................................................................................................................................273
Front view....................................................................................................................................................................273
Rear view .....................................................................................................................................................................274
Maintenance..............................................................................................275
Inspection guide..............................................................................................................................................275
Lubrication specification............................................................................................................................... 275
Cleaning the printer........................................................................................................................................276
Cleaning the printhead lenses.................................................................................................................... 276
Parts catalog............................................................................................. 278
Legend...............................................................................................................................................................278
Assembly 1: Covers.........................................................................................................................................279
Assembly 2: Electronics 1.............................................................................................................................. 281
Assembly 3: Electronics 2.............................................................................................................................283
Assembly 4: Frame.........................................................................................................................................286
Assembly 5: Option trays..............................................................................................................................289
Assembly 6: Power cords..............................................................................................................................291
Assembly 7: Miscellaneous.......................................................................................................................... 293
Printer specifications...............................................................................295
Product power consumption....................................................................................................................... 295
Electrical specifications.................................................................................................................................295
Operating clearances.................................................................................................................................... 296
Acoustics...........................................................................................................................................................296
Operating environment................................................................................................................................. 297
4514-2xx
Table of contents
9

Enabling the security reset jumper.............................................................................................................297
Options and features............................................................................... 299
Available internal options.............................................................................................................................299
Media handling options................................................................................................................................ 299
Theory of operation.................................................................................. 301
POR sequence..................................................................................................................................................301
Printer control................................................................................................................................................... 301
Paper path information...................................................................................................................................301
Input tray.......................................................................................................................................................................301
Multipurpose feeder (MPF) ......................................................................................................................................301
Simplex printing .........................................................................................................................................................302
Duplex printing...........................................................................................................................................................303
Media handling components....................................................................................................................... 304
Main drive gearbox ...................................................................................................................................................304
Autocompensator mechanism (ACM) ..................................................................................................................304
Key components............................................................................................................................................. 305
Sensors ........................................................................................................................................................................305
Other key components ............................................................................................................................................306
Electrophotographic process (EP process)..............................................................................................308
Acronyms................................................................................................... 313
Index........................................................................................................... 315
Part number index.................................................................................... 321
Part name index........................................................................................325
4514-2xx
Table of contents
10

Notices, conventions, and safety information
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements
of IEC 60825-1: 2014.
Class I laser products are not considered to be hazardous. The printer contains a Class IIIb (3b) laser that is
nominally a 12‑milliwatt gallium arsenide laser operating in the wavelength of 655–675 nanometers. The laser
system and printer are designed so there is never any human access to laser radiation above a Class I level
during normal operation, user maintenance, or prescribed service condition.
Avis relatif à l'utilisation du laser
Cette imprimante est certifiée conforme aux exigences de la réglementation des Etats-Unis relative aux produits
laser de classe I (1) (DHHS 21 CFR, Chapitre I, Sous-chapitre J). Pour les autres pays, elle est certifiée conforme
aux exigences des normes CEI 60825-1:2014 relatives aux produits laser de classe I.
Les produits laser de classe I ne sont pas considérés comme dangereux. L'imprimante contient un laser de
classe IIIb (3b), laser arséniure de gallium 12 milliwatts opérant sur une longueur d'onde de l'ordre de 655 à
675 nanomètres. Le système laser ainsi que l'imprimante ont été conçus de manière à ce que personne ne soit
exposé à des rayonnements laser dépassant le niveau de classe I dans le cadre d'un fonctionnement normal,
de l'entretien par l'utilisateur ou de la maintenance.
Notificació del làser
La impressora està certificada als EUA per complir els requeriments de DHHS 21 CFR, capítol I, subcapítol J
per a productes de làser Classe I (1), i a la resta del món s’ha certificat com productes de làser Classe I segons
els requeriments de la norma IEC 60825-1: 2014.
Els productes de làser Classe I no es consideren perillosos. La impressora conté un làser intern Classe IIIb (3b)
que normalment és un arsenur de galió de 12 miliwatts, que funciona a la regió de longitud d’ona de 655 a 675
nanòmetres i es troba dins d’una unitat de capçals d’impressió no substituïbles. El sistema làser i la impressora
estan dissenyats de manera que les persones no estiguin exposades a una radiació del làser superior al nivell
de Classe I durant el funcionament normal, el manteniment de l’usuari o les condicions de servei prescrites.
Aviso de láser
Esta impresora se ha certificado en EE.UU. cumpliendo con los requisitos de DHHS 21 CFR, capítulo I,
subcapítulo J para los productos láser de Clase I (1) y en otros países está certificada como un producto láser
de Clase I de acuerdo con los requisitos de IEC 60825-1: 2014.
Los productos láser de Clase I no se consideran peligrosos. La impresora contiene un láser interno de Clase
IIIb (3b) que nominalmente es un láser de arsenide galio de 12 milivatios que funciona en una longitud de onda
de 655-675 nanómetros. El sistema láser y la impresora se han diseñado para que el ser humano no acceda
nunca a las radiaciones láser por encima del nivel de Clase I durante su uso normal, ni en tareas de
mantenimiento o intervenciones de servicio técnico prescritas.
4514-2xx
Notices, conventions, and safety information
11

Aviso sobre laser
Esta impressora foi certificada nos EUA por estar em conformidade com os requisitos do DHHS 21 CFR capítulo
I, subcapítulo J, para produtos a laser de Classe I (1) e, nos demais países, foi certificada como um produto a
laser de Classe I em conformidade com os requisitos da IEC 60825-1. 2014.
Os produtos a laser de Classe I não são considerados prejudiciais. A impressora contém, internamente, um
laser de Classe IIIb (3b) que é, nominalmente, um laser de arsenieto de gálio de 12 miliwatts operando no
comprimento de onda de 655-675 nanômetros. O sistema do laser e a impressora foram projetados para que
jamais haja acesso humano à radiação do laser acima do nível da Classe I durante a operação normal ou a
manutenção pelo usuário ou sob as condições de manutenção prescritas.
Avvertenze sui prodotti laser
La stampante è certificata negli Stati Uniti come prodotto conforme ai requisiti DHHS 21 CFR Capitolo I,
Sottocapitolo J per i prodotti laser di Classe I (1), mentre in altri paesi è certificata come prodotto laser di Classe
I conforme ai requisiti IEC 60825-1: 2014.
I prodotti laser di Classe I non sono considerati pericolosi. La stampante contiene un laser di Classe IIIb (3b),
che è nominalmente un laser ad arseniuro di gallio a 12 milliwatt funzionante a una lunghezza d'onda di 655-675
nanometri. Il sistema laser e la stampante sono stati progettati in modo da impedire l'esposizione a radiazioni
laser superiori al livello previsto dalla Classe I durante le normali operazioni di stampa, manutenzione o
assistenza.
Laserinformatie
De printer is in de Verenigde Staten gecertificeerd als een product dat voldoet aan de vereisten van DHHS 21
CFR hoofdstuk 1, paragraaf J voor laserproducten van klasse I (1). Elders is de printer gecertificeerd als een
laserproduct van klasse I dat voldoet aan de vereisten van IEC 60825-1: 2014.
Laserproducten van klasse I worden geacht geen gevaar op te leveren. De printer bevat een interne laser van
klasse IIIb (3b); een galliumarsenide laser met een nominaal vermogen van 12 milliwatt en een golflengtebereik
van 655-675 nanometer. Het lasersysteem en de printer zijn zodanig ontworpen dat gebruikers nooit blootstaan
aan laserstraling die hoger is dan het toegestane niveau voor klasse I-apparaten, tijdens normaal gebruik,
onderhoudswerkzaamheden door de gebruiker of voorgeschreven servicewerkzaamheden.
Lasererklæring
Printeren er certificeret i USA i henhold til kravene i DHHS 21 CFR kapitel I, underafsnit J for klasse l (1)-
laserprodukter og er andre steder certificeret som et klasse I laserprodukt i henhold til kravene i IEC 60825-1:
2014.
Klasse I-laserprodukter anses ikke som farlige. Printeren indeholder internt en klasse IIIb (3b)-laser, der nominelt
er en 12 milliwatt galliumarsenid-laser, som fungerer i bølgelængdeområdet 655-675 nanometer. Lasersystemet
og printeren er udviklet på en sådan måde, at der ikke er en direkte laserstråling, der overskrider Klasse I-
niveauet under normal brug, brugers vedligeholdelse eller de foreskrevne servicebetingelser.
Laser-Hinweis
Der Drucker wurde in den USA zertifiziert und entspricht den Anforderungen der Vorschriften DHHS 21 CFR
Kapitel I für Laserprodukte der Klasse I (1), andernorts ist er als Laserprodukt der Klasse I zertifiziert, das den
Anforderungen von IEC 60825-1 entspricht: 2014.
4514-2xx
Notices, conventions, and safety information
12

Laserprodukte der Klasse I werden nicht als gefährlich betrachtet. Der Drucker enthält im Inneren einen Laser
der Klasse IIIb (3b), und zwar einen 12-Milliwatt-Gallium-Arsenid-Laser, der im Wellenlängenbereich von 655 bis
675 Nanometern arbeitet. Das Lasersystem und der Drucker sind so konstruiert, dass unter normalen
Betriebsbedingungen, bei der Wartung durch den Benutzer oder bei den vorgeschriebenen
Wartungsbedingungen Menschen keiner Laserstrahlung ausgesetzt sind, die die Werte für Klasse I
überschreitet.
Laserilmoitus
Tämä tulostin on sertifioitu Yhdysvalloissa DHHS 21 CFR Chapter I, Subchapter J -standardin mukaiseksi luokan
I (1) -lasertuotteeksi ja muualla IEC 60825-1:2014 -standardin mukaiseksi luokan I lasertuotteeksi.
Luokan I lasertuotteita ei pidetä haitallisina. Tulostimen sisällä on luokan IIIb (3b) laser, joka on nimellisteholtaan
12 mW:n galliumarsenidilaser ja toimii 655–675 nanometrin aallonpituuksilla. Laserjärjestelmä ja tulostin ovat
rakenteeltaan sellaisia, että käyttäjä ei joudu alttiiksi luokkaa 1 suuremmalle säteilylle normaalin käytön,
ylläpidon tai huollon aikana.
Lasermerknad
Skriveren er sertifisert i USA for samsvar med kravene i DHHS 21 CFR kapittel I, underkapittel J for
laserprodukter av klasse I (1) og er andre steder sertifisert som et laserprodukt av klasse I som samsvarer med
kravene i IEC 60825-1: 2014.
Laserprodukter av klasse I anses ikke som helseskadelige. Skriveren inneholder en intern laser av klasse IIIb
(3b) som nominelt er en 12 milliwatt galliumarsenid-laser som opererer i bølgelengder på 655–675 nanometer.
Lasersystemet og skriveren er utformet slik at mennesker ikke utsettes for laserstråling utover nivået i klasse
I under normal drift, vedlikehold eller foreskrevet service.
Meddelande om laser
Skrivaren är certifierad i USA i enlighet med kraven i DHHS 21 CFR kapitel I, underkapitel J för klass I (1)-
laserprodukter, och på andra platser certifierad som en klass I-laserprodukt i enlighet med kraven i IEC 60825-1.
2014.
Laserprodukter av klass I anses inte vara skadliga. Skrivaren innehåller en klass IIIb (3b)-laser, vilket är en 12
mW galliumarseniklaser som arbetar inom en våglängd på 655–675 nm. Lasersystemet och skrivaren är
utformade så att människor aldrig utsätts för laserstrålning över klass I-nivå under normala förhållanden vid
användning, underhåll eller service.
レーザーについて
本機は、米国においてクラス I（1）レーザー製品に対する DHHS 21 CFR Chapter I、Subchapter J の要件に
準拠し、その他の国では IEC 60825-1: 2014 の要件に準拠するクラス I レーザー製品として認可されています。
クラス I レーザー製品は、危険性がないとみなされています。本機には、クラス IIIb（3b）レーザーが内蔵
されています。これは、655 ～675 ナノメートルの波長で動作する定格 12 ミリワットのガリウムヒ素レー
ザーです。レーザーシステムとプリンタは、通常の操作、ユーザによるメンテナンス、または所定のサービ
ス条件の下で、ユーザがクラス I レベルを超えるレーザー放射に絶対にさらされないように設計されていま
す。
레이저 고지사항
프린터는 미국에서 레이저 제품용 DHHS 21 CFR Chapter I, Subchapter J의요구 사항을 준수하며 이외 지역에
서IEC 60825-1:2014의요구 사항을 준수하는 클래스 I(1) 레이저 제품으로 승인되었습니다.
4514-2xx
Notices, conventions, and safety information
13

클래스 I 레이저 제품은 위험한 제품으로 간주되지 않습니다. 프린터에는 655‑675 나노미터의 파장 영역에서
작동하는 공칭 12밀리와트 갈륨 비소 레이저인 클래스 IIIb(3b) 레이저가 내부에 포함되어 있습니다. 레이저 시
스템과 프린터는 정상적인 작동, 사용자 유지 관리 또는 사전 설명된 서비스 조건에는 사람에게 클래스 I 수준
이상의 레이저 방사가 노출되지 않도록 설계되었습니다.
激光注意事项
本打印机在美国认证合乎 DHHS 21 CFR Chapter I，Subchapter J 对分类I (1) 激光产品的标准，而在其他地区
则被认证是合乎 IEC 60825-1: 2014 的分类I 激光产品。
一般认为分类I 激光产品不具有危险性。本打印机内部含有分类IIIb (3b) 的激光，是标称值为 12 毫瓦的砷化镓
激光，其工作波长范围在655–675nm 之间。本激光系统及打印机的设计，在一般操作、使用者维护或规定内
的维修情况下，不会使人体接触分类I 以上等级的辐射。
雷射聲明
本印表機係經過美國核可，符合 DHHS 21 CFR，Chapter I，Subchapter J 規定的 I (1) 級雷射產品；在美國以
外的地區，為符合 IEC 60825-1 2014 規定的 I 級雷射產品。
根據 I 級雷射產品的規定，這類產品不會對人體造成傷害。本印表機內部所採用之 IIIb (3b) 級雷射只會產生12
毫瓦特 (milliwatt)、波長 655 至675 奈米 (nanometer) 的鎵砷放射線 (gallium arsenide laser)。使用者只要以正
確的方法操作及維護保養，並依照先前所述之維修方式進行修護，此印表機與其雷射系統絕不會產生I 級以上
的放射線，而對人體造成傷害。
Conventions
Note: A note identifies information that could help you.
Warning: A warning identifies something that could damage the product hardware or software.
CAUTION: A caution indicates a potentially hazardous situation that could injure you.
Dierent types of caution statements include:
CAUTION—POTENTIAL INJURY: Indicates a risk of injury.
CAUTION—SHOCK HAZARD: Indicates a risk of electrical shock.
CAUTION—HOT SURFACE: Indicates a risk of burn if touched.
CAUTION—TIPPING HAZARD: Indicates a crush hazard.
CAUTION—PINCH HAZARD: Indicates a risk of being caught between moving parts.
Safety information
•The safety of this product is based on testing and approvals of the original design and specific components.
The manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.
•The maintenance information for this product has been prepared for use by a professional service person
and is not intended to be used by others.
4514-2xx
Notices, conventions, and safety information
14

•There may be an increased risk of electrical shock and personal injury during disassembly and servicing of
this product. Professional service personnel should understand this risk and take necessary precautions.
CAUTION—SHOCK HAZARD: When you see this symbol, there is a danger from hazardous voltage
in the area of the product where you are working. Unplug the product before you begin, or use
caution if the product must receive power in order to perform the task.
CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced.
There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge,
disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the
manufacturer's instructions and local regulations.
Consignes de sécurité
•La sécurité de ce produit est basée sur des tests et certifications de sa conception d'origine et de ses
composants spécifiques. Le fabricant décline toute responsabilité en cas d'utilisation de pièces de rechange
non autorisées.
•Les informations de maintenance de ce produit sont destinées à des professionnels qualifiés et ne sont pas
conçues pour être utilisées par d'autres personnes.
•Il existe un risque potentiel de choc électrique et de blessures lors du démontage et de la maintenance de
ce produit. Le personnel professionnel de maintenance doit comprendre les risques et prendre les
précautions nécessaires.
ATTENTION—RISQUE D'ELECTROCUTION : Ce symbole indique un danger lié à des niveaux de
tension dangereux dans la zone du produit à manipuler. Débranchez le produit avant de commencer,
ou agissez avec prudence si le produit doit être alimenté pour eectuer l'opération.
ATTENTION—RISQUE DE BLESSURE : La batterie lithium de ce produit n'est pas destinée à être
remplacée. Si vous ne respectez pas les instructions de remplacement de la batterie, vous risquez
de provoquer une explosion. Ne rechargez pas, ne désassemblez pas et ne brûlez pas la batterie au
lithium. Mettez les batteries lithium usagées au rebut selon les instructions du fabricant et les
réglementations locales.
Informació de seguretat
•La seguretat d'aquest producte es basa en les proves i les homologacions del disseny original i dels
components específics. El fabricant no és responsable de la seguretat en el cas d'ús de peces de recanvi
no autoritzades.
•La informació de manteniment d'aquest producte s'ha preparat per a l'ús d'un professional tècnic i no per
a l'ús d'altres persones.
•És possible que el risc de descàrrega elèctrica i lesions personals augmenti durant el desmuntatge i les
tasques de manteniment d'aquest producte. El professional tècnic ha de comprendre aquest risc i prendre
les precaucions necessàries.
PRECAUCIÓ. PERILL DE DESCÀRREGA ELÈCTRICA: Quan vegeu aquest símbol, indica que hi ha
un perill de voltatge elevat en l'àrea del producte on esteu treballant. Desconnecteu el producte
abans de començar o tingueu precaució si el producte ha de rebre alimentació per realitzar la tasca.
PRECAUCIÓ. POSSIBLES DANYS: La bateria de liti d'aquest producte no ha estat dissenyada
perquè se substitueixi. Hi ha perill d’explosió si no es substitueix correctament la bateria de liti. No
recarregueu, desmunteu o incinereu una bateria de liti. Desfeu-vos de les bateries de liti usades
d’acord amb les instruccions del fabricant i les regulacions locals.
4514-2xx
Notices, conventions, and safety information
15

Información de seguridad
•La seguridad de este producto se basa en las pruebas y comprobaciones del diseño original y los
componentes específicos. El fabricante no se hace responsable de la seguridad en caso de uso de piezas
de repuesto no autorizadas.
•La información de mantenimiento de este producto se ha preparado para su uso por parte de un profesional
de asistencia técnica y no está diseñada para su uso por parte de otros usuarios.
•Es posible que haya un mayor riesgo de descarga eléctrica y daños personales durante el desmontaje y el
mantenimiento de este producto. El personal de asistencia profesional debe conocer este riesgo y tomar
las precauciones necesarias.
PRECAUCIÓN: PELIGRO DE DESCARGAS ELÉCTRICAS: Cuando vea este símbolo, existe peligro
de tensiones peligrosas en el área del producto en la que está trabajando. Desconecte el producto
antes de empezar o tenga cuidado si el producto debe recibir alimentación a fin de realizar la tarea.
PRECAUCIÓN: POSIBLES DAÑOS PERSONALES: La batería de litio de este producto no debe
reemplazarse. Existe riesgo de explosión si se sustituye incorrectamente una batería de litio. No
recargue, desmonte ni incinere una batería de litio. Deseche las baterías de litio usadas según las
instrucciones del fabricante y las normativas locales.
Informações sobre segurança
•A segurança deste produto é baseada em testes e aprovações do design original e de componentes
específicos. O fabricante não é responsável por segurança em caso de uso não autorizado de peças de
substituição.
•As informações sobre manutenção deste produto foram preparadas para utilização por um técnico
profissional experiente e não se destinam ao uso por outros.
•Pode haver maior risco de choque elétrico e danos pessoais durante a desmontagem e manutenção deste
produto. Os técnicos profissionais experientes devem entender esses riscos e tomar as precauções
necessárias.
ATENÇÃO—RISCO DE CHOQUE: Se você vir este símbolo, existe perigo de tensão elétrica na área
do produto onde está trabalhando. Desligue o produto antes de começar ou tenha cuidado se o
produto precisar receber energia para executar a tarefa.
ATENÇÃO—RISCO DE FERIMENTO: A bateria de lítio neste produto não deve ser substituída. Existe
o risco de explosão se uma bateria de lítio for substituída incorretamente. Não recarregue, desmonte
nem incinere uma bateria de lítio. Descarte as baterias de lítio usadas de acordo com as instruções
do fabricante e regulamentos locais.
Informazioni sulla sicurezza
•La sicurezza di questo prodotto è basata sui test e sulle approvazioni del design originale e dei componenti
specifici. Il produttore non è responsabile della sicurezza in caso di utilizzo di parti di ricambio non
autorizzate.
•Le informazioni di manutenzione per questo prodotto sono state predisposte per essere utilizzate da un
tecnico dell'assistenza professionale e non sono state previste per l'uso da parte di altre persone.
•È possibile che vi sia un maggior rischio di scosse elettriche e lesioni personali durante lo smontaggio e la
manutenzione di questo prodotto. Il personale dell'assistenza deve comprendere questo rischio e prendere
le precauzioni necessarie.
4514-2xx
Notices, conventions, and safety information
16

ATTENZIONE - PERICOLO DI SCOSSE ELETTRICHE: Questo simbolo indica la presenza di un
rischio per tensioni pericolose nell'area del prodotto in cui si lavora. Scollegare l'alimentazione prima
di iniziare, o prestare la massima attenzione se per eettuare l'operazione il prodotto deve ricevere
l'alimentazione.
ATTENZIONE - PERICOLO DI LESIONI: La batteria al litio contenuto nel prodotto non deve essere
sostituita: in caso di sostituzione errata della batteria al litio, potrebbe verificarsi un'esplosione. Non
ricaricare, smontare o bruciare batterie al litio. Smaltire le batterie al litio usate seguendo le istruzioni
del produttore e le norme locali.
Informatie over veiligheid
•De veiligheid van dit product is gebaseerd op testen en goedkeuringen van het oorspronkelijke ontwerp
en specifieke onderdelen. De fabrikant is niet verantwoordelijk voor de veiligheid bij gebruik van
ongeautoriseerde vervangende onderdelen.
•De informatie over het onderhoud van dit product is opgesteld voor gebruik door een professionele
onderhoudsmonteur en is niet bedoeld voor gebruik door anderen.
•Tijdens demontage en onderhoud van dit product bestaat mogelijk een hoger risico op elektrische
schokken en lichamelijk letsel. Professionele onderhoudsmonteurs dienen op de hoogte te zijn van dit risico
en de noodzakelijke voorzorgsmaatregelen te nemen.
LET OP: GEVAAR VOOR ELEKTRISCHE SCHOKKEN: Wanneer u dit symbool ziet, bestaat er een
gevaar voor gevaarlijke spanning in het gebied van het product waaraan u werkt. Haal de stekker
van het product uit het stopcontact voordat u begint, of let extra goed op als het product stroom
nodig heeft om een taak te kunnen uitvoeren.
LET OP: RISICO OP LETSEL: De lithiumbatterij in dit product moet niet worden vervangen. Wanneer
de lithiumbatterij niet juist wordt vervangen, bestaat er explosiegevaar. Probeer nooit
lithiumbatterijen op te laden, open te maken of te verbranden. Gooi gebruikte lithiumbatterijen weg
volgens de aanwijzingen van de fabrikant en houd hierbij de plaatselijke regelgeving in acht.
Sikkerhedsoplysninger
•Sikkerheden for dette produkt er baseret på afprøvning og godkendelser af det oprindelige design og
specifikke komponenter. Producenten er ikke ansvarlig for sikkerhed i tilfælde af brug af uautoriserede dele
til udskiftning.
•Vedligeholdelsesoplysninger om dette produkt er udarbejdet til brug af en kvalificeret servicetekniker og
er ikke beregnet til at blive brugt af andre.
•Der kan være en forøget risiko for elektrisk stød eller personskade ved afmontering og service af dette
produkt. Professionelt servicepersonale bør forstå denne risiko og tage nødvendige forholdsregler.
FORSIGTIG - ELEKTRISK STØD: Når du ser dette symbol, er der risiko for elektrisk spænding i
nærheden af produktet, hvor du arbejder. Tag strømstikket ud inden du begynder, eller udvis
forsigtighed, hvis produktet skal modtage strøm for at udføre opgaven.
FORSIGTIG - RISIKO FOR SKADE: Litium-batteriet i dette produkt er ikke beregnet til at blive
udskiftet. Der er fare for eksplosion, hvis et litium-batteri udskiftes forkert. Du må ikke genoplade,
demontere eller arænde et litium-batteri. Brugte litium-batterier skal bortskaes i
overensstemmelse med producentens instruktioner og lokale retningslinjer.
4514-2xx
Notices, conventions, and safety information
17

Sicherheitshinweise
•Die Sicherheit dieses Produkts basiert auf Tests und Zulassungen des Originaldesigns und der spezifischen
Komponenten. Sofern nicht autorisierte Ersatzteile eingesetzt werden, übernimmt der Hersteller keinerlei
Verantwortung in Bezug auf die Sicherheit dieses Produkts.
•Die Wartungsinformationen für dieses Produkt wurden für ausgebildete Servicemitarbeiter
zusammengestellt und dürfen nicht von anderen verwendet werden.
•Möglicherweise besteht bei der Demontage und Wartung dieses Produkts eine erhöhte Stromschlag- und
Verletzungsgefahr. Ausgebildete Servicemitarbeiter sollten sich dieser Gefahr bewusst sein und die
notwendigen Vorsichtsmaßnahmen ergreifen.
VORSICHT – STROMSCHLAGGEFAHR: Wenn Sie dieses Symbol sehen, besteht eine Gefahr durch
gefährliche Spannungen in dem Produktbereich, in dem Sie arbeiten. Trennen Sie das Produkt von
seiner Stromverbindung, bevor Sie beginnen, oder gehen Sie vorsichtig vor, wenn das Produkt für
die Durchführung der Aufgabe mit Strom versorgt werden muss.
VORSICHT – MÖGLICHE VERLETZUNGSGEFAHR Die Lithiumbatterie in diesem Produkt darf nicht
ausgetauscht werden. Wird eine Lithiumbatterie nicht ordnungsgemäß ausgetauscht, besteht
Explosionsgefahr. Lithiumbatterien dürfen auf keinen Fall wieder aufgeladen, auseinander
genommen oder verbrannt werden. Befolgen Sie zum Entsorgen verbrauchter Lithiumbatterien die
Anweisungen des Herstellers und die örtlichen Bestimmungen.
Turvallisuusohjeet
•Tämän laitteen turvallisuus perustuu alkuperäisen rakenteen ja tiettyjen osien testaukseen ja
hyväksymiseen. Valmistaja ei vastaa turvallisuudessa, jos laitteessa on käytetty luvattomia vaihto-osia.
•Tämän tuotteen huoltoa koskevat tiedot on tarkoitettu vain ammattitaitoisen huoltohenkilön käyttöön.
•Tämän tuotteen purkamiseen ja huoltoon voi liittyä kasvanut sähköiskun tai henkilövahingon vaara.
Ammattitaitoisen huoltohenkilön on ymmärrettävä tämä vaara ja toimittava sen edellyttämällä tavalla.
HUOMIO – SÄHKÖISKUN VAARA: Tämä symboli ilmaisee, että tuotteen työskentelyalueella on
olemassa vaarallinen jännite. Irrota laite verkkovirrasta ennen kuin aloitat tai toimi erittäin varovasti,
jos laitteessa on oltava virta työn aikana.
HUOMIO – TAPATURMAN MAHDOLLISUUS: Tuotteessa olevaa litiumakkua ei ole tarkoitettu
vaihdettavaksi. Litiumakun poistaminen väärin aiheuttaa räjähdysvaaran. Älä lataa, pura tai polta
litiumakkua. Hävitä käytetyt litiumakut valmistajan ohjeiden ja paikallisten säädösten mukaisesti.
Sikkerhetsinformasjon
•Sikkerheten til dette produktet er basert på testing og godkjenning av originaldesignet og bestemte
komponenter. Produsenten er ikke ansvarlig for sikkerheten ved bruk av uautoriserte reservedeler.
•Vedlikeholdsinformasjonen for dette produktet er tilrettelagt for bruk av profesjonelt servicepersonale, og
er ikke ment for bruk av andre.
•Det kan være en økt risiko for elektrisk støt og personskade under demontering og vedlikehold av produktet.
Profesjonelt servicepersonell må være innforstått med denne risikoen og ta nødvendige forholdsregler.
FORSIKTIG – FARE FOR STØT: Dette symbolet betyr at det er fare for farlig spenning i det området
av produktet der du arbeider. Koble fra produktet før du begynner, eller vær forsiktig hvis produktet
må ha strøm for å kunne utføre oppgaven.
4514-2xx
Notices, conventions, and safety information
18

FORSIKTIG – POTENSIELLE SKADER: Litiumbatteriet i dette produktet er ikke beregnet for å byttes.
Det er fare for eksplosjon hvis litiumbatteriet skiftes ut på feil måte. Ikke lad opp, demonter eller
destruer et litiumbatteri. Kast brukte litiumbatterier i henhold til produsentens instruksjoner og lokale
regelverk.
Säkerhetsinformation
•Säkerheten för denna produkt baseras på tester och godkännanden av ursprungsdesignen och av specifika
komponenter. Tillverkaren har inget ansvar vid användning av oauktoriserade reservdelar.
•Underhållsinformationen för produkten är avsedd att användas av utbildade servicetekniker och inte avsedd
att användas av andra.
•Risken för elektriska stötar och personskador kan vara förhöjd vid isärtagning och service av produkten.
Professionell servicepersonal bör vara medvetna om denna risk och vidta nödvändiga försiktighetsåtgärder.
VAR FÖRSIKTIG– RISK FÖR ELEKTRISK STÖT: När du ser denna symbol är det risk att det finns
farlig spänning i den del av produkten du arbetar med. Koppla från strömmen innan du börjar, eller
var försiktig om produkten måste vara strömförsörjd för att uppgiften ska kunna utföras.
VAR FÖRSIKTIG – RISK FÖR SKADA: Litiumbatteriet i produkten är inte utbytbart. Om ett
litiumbatteri byts ut på fel sätt finns det risk att det exploderar. Du får inte ladda om, ta isär eller elda
upp ett litiumbatteri. Gör dig av med använda litiumbatterier enligt tillverkarens instruktioner och
lokala föreskrifter.
安全情報
•本製品の安全性は、本来の設計、特定コンポーネントの試験、承認に基づいています。承認されていない交換
部品をお客様が使用した場合、メーカーは安全性に対して責任を負いません。
•本製品のメンテナンス情報は、専門のサービス担当者による利用を目的としており、その他の人を対象としてい
ません。
•本製品の分解や保守サービスを行う場合は、感電や傷害の危険性があります。専門のサービス担当者はこの
危険性を理解し、十分な対策を講じる必要があります。
注意—感電危険： この表記がある場合、対象製品の作業領域には、高電圧による危険性が生じています。
作業を始める前に、製品から電源コードを取り外してください。また作業時に、製品に給電する必要がある
場合は、十分に注意するようにしてください。
注意—傷害の恐れあり： この製品に使用されているリチウム電池は、交換を前提としていません。リチウム
電池の交換を誤ると破裂する危険性があります。リチウム電池の充電、解体、焼却はしないでください。使
用済みのリチウム電池を廃棄する際は、製造元の指示およびお使いの地域の法律に従ってください。
안전 정보
•이제품의 안전은 기본 디자인 및특정 구성품의 승인 및테스팅을 기반으로 합니다. 제조업체는 권한 없는
교체 부품 사용 시안전에 대해 책임을 지지 않습니다.
•이제품의 유지관리 정보는 전문 서비스 요원을 대상으로 하며 다른 사람은 사용할 수없습니다.
•제품 분해 및서비스 중에는 감전 및상해 위험이 증가할 수있습니다. 전문 서비스 요원은 이와 같은 위험
을이해하고 필요한 예방 조치를 취해야 합니다.
주의—감전 위험: 이기호가 표시된 경우 작업 중인 제품 주변에서 위험 전압 위험이 있습니다. 사용
전/후에 전원 코드를 뽑아 두시고 제품에서 작업을 수행하는 데반드시 전원이 필요한 경우에는 주의
하여 사용하십시오.
4514-2xx
Notices, conventions, and safety information
19

주의—상해 위험: 이제품에 들어 있는 리튬 배터리는 교체할 수없습니다. 리튬 배터리를 잘못 교체
하면 폭발할 위험이 있습니다. 리튬 배터리를 충전, 분해하거나 불에 태우지 마십시오. 제조업체의
지침과 지역 규정에 따라 다쓴리튬 배터리를 폐기하십시오.
安全信息
•本产品的安全性以原始设计和特定组件的测试和审批为基础。如果使用未经授权的替换部件，制造商不对
安全性负责。
•本产品的维护信息仅供专业服务人员使用，并不打算由其他人使用。
•本产品在拆卸和维修时，遭受电击和人员受伤的危险性会增高。专业服务人员对这点必须有所了解，并采
取必要的预防措施。
小心—电击危险：当您看到此符号时，在您工作的产品区域内存在危险电压的威胁。在您开始操作之
前请拔掉产品电源，如果产品必须接收功率才能执行任务，请务必谨慎操作。
小心—可能的伤害：本产品中的锂电池不可更换。如果不正确更换锂电池，可能会有爆炸危险。不要
再充电、拆解或焚烧锂电池。丢弃旧的锂电池时应按照制造商的指导及当地法规进行处理。
安全資訊
•本產品安全性係以原始設計及特定元件之測試與核准為依據。如有使用未獲授權替換組件之情形者，製造
商對安全性概不負責。
•本產品之維護資訊僅供專業維修人員使用，而非預定由他人使用。
•拆裝及維修本產品時，有可能造成電擊與人員損傷之危險。專業維修人員應瞭解前項危險並採取必要措施。
請當心—觸電危險：當您看到此符號時，表示您所在產品工作區有危險電壓。開始工作之前，請先拔
掉產品電源線，若產品必須接上電源方能執行作業，用電時請務必小心。
請當心—潛在受傷危險性：本產品中的鋰電池原本並不需要予以更換。若未正確更換鋰電池，可能會
有爆炸的危險。請勿將鋰電池充電、拆裝或焚燒。請遵照製造商的指示及當地法規，丟棄用過的電
池。
General caution statements
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to
an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, use only the power cord
provided with this product or the manufacturer's authorized replacement.
CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips,
multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily
overloaded by a laser printer and may result in a risk of fire, property damage, or poor printer
performance.
CAUTION—POTENTIAL INJURY: Only a Lexmark Inline Surge Protector that is properly connected
between the printer and the power cord provided with the printer may be used with this product. The
use of non-Lexmark surge protection devices may result in a risk of fire, property damage, or poor
printer performance.
4514-2xx
Notices, conventions, and safety information
20