Lexmark MS810 Series User manual

Supplies Guide
When Cartridge low appears, you may need to order a new toner cartridge. You may be able to print a limited number of
pages when the message first appears, but it is best to have the new cartridge available when the current one runs out.
Ordering toner cartridges
Notes:
•Estimated cartridge yield is based on the ISO/IEC 19752 standard.
•Extremely low print coverage for extended periods of time may negatively affect actual yield.
Item Return Program cartridge
For the United States and Canada
Toner Cartridge 521
High Yield Toner Cartridge 521H
Extra High Yield Toner Cartridge 521X*
For the European Union, European Economic Area , and Switzerland
Toner Cartridge 522
High Yield Toner Cartridge 522H
Extra High Yield Toner Cartridge 522X*
For the Asia Pacific Region (includes Australia and New Zealand)
Toner Cartridge 523
High Yield Toner Cartridge 523H
Extra High Yield Toner Cartridge 523X*
For Latin America (includes Puerto Rico and Mexico)
Toner Cartridge 524
High Yield Toner Cartridge 524H
Extra High Yield Toner Cartridge 524X*
For Africa, Middle East, Central Eastern Europe, and Commonwealth of Independent States
Toner Cartridge 525
High Yield Toner Cartridge 525H
Extra High Yield Toner Cartridge 525X*
* This toner cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812ne printer models.
For more information on countries located in each region, visit www.lexmark.com/regions.
Supplies Guide
Page 1 of 3

Item Regular cartridge
Worldwide
High Yield Toner Cartridge 520HA1
Extra High Yield Toner Cartridge 520XA2
1This cartridge is supported only in MS810n and MS810dn printer models.
2This cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812ne printer models.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name Lexmark Return Program Regular
Imaging unit 520Z 520ZA
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of
the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
•Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.
Notes:
•Using certain types of paper may require more frequent replacement of the maintenance kit.
•The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually
ordered and replaced if necessary.
•For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.
Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812
Fuser maintenance kit type Part number
Type 00 40X8420
Type 01 40X8421
Type 02 40X8422
Type 03 40X8423
Type 04 40X8424
Supplies Guide
Page 2 of 3

Lexmark regular fuser maintenance kits and part numbers for MS810, MS811, and MS812
Fuser maintenance kit type Part number
Type 05 40X8425
Type 06 40X8426
Type 07 40X8427
Type 08 40X8428
Type 09 40X8429
Ordering a roller kit
For more information on replacing the roller kit, see the instruction sheet that came with the part.
Lexmark roller kit and part number
Type Part number
Printer engine roller maintenance kit 40X7706
Ordering staple cartridges
Part name Part number
Staple cartridges 25A0013
Supplies Guide
Page 3 of 3