Lexmark Optra C710 User manual

Quick Reference
Lexmark Optra C710
Color Laser Printer
Press <Menu> to:
•Enter the menus from the ready state
•Scroll through menus or values
•Increase or decrease a numerical value
•Display the Job Menu or the Supplies Menu while the printer is busy
Press Select to:
•Select the item on the second line of the display
•Save the selection as a new default setting
Press Return to:
•Back up to the previous menu level
Press Stop to:
•Temporarily stop all print activity without losing data
Press Go to:
•Exit printer menus and return to the ready state
•Clear messages
Operator
Panel
Ready
1 Menu 2 Select 3
Go 5
Return 4
Stop 6
Overview of Printer Menus
Menus or menu items in italics are displayed only when the
required option is installed. Capitalized menu items (for example,
PAPER SIZE) have submenus.
PCL EMUL MENU
Font Source
Font Name
Point Size
Pitch
Symbol Set
Orientation
Lines per Page
A4 Width
Auto CR after LF
Auto LF after CR
TRAY RENUMBER
JOB MENU
Cancel Job
Reset Printer
Print Buffer
CONFIDENTIAL JOB
HELD JOBS
SETUP MENU
Printer Language
Power Saver
Resource Save
Download Target
Print Timeout
Wait Timeout
Auto Continue
Jam Recovery
Page Protect
Print Area
Display Language
Alarm Control
Toner Alarm
Job Buffer Size
Job Accounting
Job Acct Limit
POSTSCRIPT MENU
Print PS Error
Font Priority
Image Smoothing
UTILITIES MENU
Print Menus
Print Net1 Setup
Print Net2 Setup
Print Net3 Setup
Print Fonts
Print Directory
Factory Defaults
Format Flash
Defragment Flash
Format Disk
Job Acct Stat
Hex Trace
CHANGE TONER
SERIAL MENU
STANDARD SERIAL
SERIAL OPTION 1
SERIAL OPTION 2
SERIAL OPTION 3
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Serial Buffer
Job Buffering
RS-232/RS-422
RS-422 Polarity
Serial Protocol
Robust XON
Baud
Data Bits
Parity
Honor DSR
INFRARED MENU
Infrared Port
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Infrared Buffer
Job Buffering
Window Size
Transmit Delay
Max Baud Rate
COLOR MENU
Color Correction
Print Resolution
Image Enhancement
SUPPLIES MENU
<color> Toner
Tray 1 Status
Tray 2 Status
Tray 3 Status
Coating Roll
Transfer Belt
LOCALTALK MENU
LocalTalk Port
PCL SmartSwitch
PS SmartSwitch
NPA Mode
LocalTalk Buffer
Job Buffering
NPA Hosts
LocalTalk Name
LocalTalk Addr
LocalTalk Zone
FAX MENU
Fax Port
Fax Baud
Fax Data Bits
Fax Parity
Fax Buffer
Job Buffering
Fax Paper Size
Fax Paper Type
FAX SETUP
FAX LOGS
FAX SEND
FAX RECEIVE
PARALLEL MENU
STD PARALLEL
PARALLEL OPT 1
PARALLEL OPT 2
PARALLEL OPT 3
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Parallel Buffer
Job Buffering
Advanced Status
Protocol
Honor Init
Parallel Mode 1
Parallel Mode 2
NETWORK MENU
NETWORK OPTION1
NETWORK OPTION 2
NETWORK OPTION 3
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Network Buffer
Job Buffering
NETWORK x SETUP
USB MENU
USB OPTION 1
USB OPTION 2
USB OPTION 3
PCL
SmartSwitch
PS SmartSwitch
NPA Mode
USB Buffer
Job Buffering
FINISHING MENU
Duplex
Duplex Bind
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
Multipage Print
Multipage Order
Multipage View
Multipage Border
PAPER MENU
Paper Source
PAPER SIZE
PAPER TYPE
PAPER WEIGHT
CUSTOM TYPES
Substitute Size
Configure MP
Paper Loading

Loading Paper and Transparencies
Important! Move the rear and side guides to properly position the
guides for the media size.
Note: Labels and card stock can only be used in the multipurpose
feeder. Transparencies can only be fed from the multipurpose feeder or
tray 1.
Important! Recommended Lexmark transparencies are P/N 12A5150
(letter) or P/N 12A5151 (A4).
Clearing Printer Paper Jams
Printer Paper Path
Clearing Duplex Unit Paper Jams
Duplex Unit Paper Path
Paper or
transparencies
Rear guide
Maximum stack height
Paper face up top
edge entering printer
Adjust Guides Flex Paper
Load Paper Tray
Multipurpose Feeder
Paper face down top
edge entering printer Envelope face down
with flap to the right
Top output bin
Message Location
202 Paper Jam Fuser and output rollers
201 Paper Jam Transfer belt and fuser
250 Paper Jam Multipurpose feeder
24x Paper Jam Paper tray
202 Paper Jam - Fuser and Output Rollers
1 Open the fuser cover, fuser door, and front cover.
2 Remove coating roll.
3 Carefully remove jammed paper.
4 Close the front cover, fuser door, and fuser cover.
Note: Paper jammed in the fuser rollers must be
removed from the underside of the fuser.
201 Paper Jam - Transfer Belt and Fuser
1 Open the front cover.
2 Carefully remove any jammed paper.
3 Close the front cover.
250 Paper Jam - Multipurpose Feeder
1 Open the front cover.
2 Carefully remove any jammed paper.
3Closethefrontcover.
24x Paper Jam - Check Paper Tray x
1 Remove the paper tray.
2 Carefully remove any jammed paper.
3 Place the tray inside the printer.
Note: You may have to remove the drawer above the
paper jam or clear the jam from inside the front cover.
Message Location
230 Paper Jam Top duplex assembly
231 Paper Jam Rear duplex assembly
232 Paper Jam Duplex unit base and tray
230 Paper Jam - Top Duplex Assembly
1 Open the top duplex assembly door.
2 Carefully remove jammed paper.
3 Close the top duplex assembly door.
231 Paper Jam - Rear Duplex Assembly
1 Open the rear cover.
2 Carefully remove any jammed paper.
3 Close the rear cover.
232 Paper Jam - Duplex Unit Base and
Tray
1 Completely remove duplex unit inverter tray.
2 Carefully remove jammed paper (check inside
duplex unit base).
3 Insert duplex unit inverter tray into duplex unit.
© Copyright Lexmark International, Inc. 1999. All rights reserved.
Printed in U.S.A.
This document is printed on recycled paper. 9/99
E.C. 1C0105 P/N 10E0243