LF STYLE SELECTIONS 1790VA-24-201 User manual

1
XXXXXXX
ITEM #962222
MODEL #1790VA-24-201
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday.
You could also contact us at [email protected] or visit www.lowespartsplus.com.
Español p. XX
Español p. 11
VANITY WITH TOP
STYLE SELECTIONS and logo design are trademarks
or registered trademarks of LF, LLC. All rights reserved.

2
TABLE OF CONTENTS
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................3
Safety Information............................................................................................................................3
Preparation......................................................................................................................................4
Assembly or Installation Instructions...............................................................................................4
Care and Maintenance ...................................................................................................................9
Warranty..........................................................................................................................................9
Replacement Parts List .................................................................................................................10

3
PACKAGE CONTENTS
HARDWARE CONTENTS
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install this
product.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY
A Vanity 1
B 1Top
C 2Back Stretcher Bar
D 1
Tip-out Door (preassembled
to Vanity (A))
E 1
Left Door (preassembled
to Vanity (A))
F 1
Right Door (preassembled
to Vanity (A))
AA
Touch-Up Pen
Qty. 1
WARNING
• There are several assembly steps, including unpacking, that require two adults.
A
B
C
C
D
E
F

4
PREPARATION
VANITY INSTALLATION INSTRUCTIONS
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry)
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone caulk,
power drill with drill bit
Helpful Tools (not included): Measuring tape, level
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
1
A
1. Place the folded vanity in the upright position.
Unfold the left side panel of the vanity (A), and
repeat to unfold for the right side panel.
1
A

5
VANITY INSTALLATION INSTRUCTIONS
2
A
2. Flip down the bottom panel to let it rest on the wood
support blocks located on the side panels.
3. Locate one of the back stretcher bar (C) and gently
slide the lock pins into the lower slot holes on the
side panels.
3
A
C
1
2

6
VANITY INSTALLATION INSTRUCTIONS
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
5. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 5). Using appropriate mounting
hardware (not included), secure the vanity (A)
to a wall stud. If possible, secure the vanity
(A) to two wall studs for increased stability.
4
A
C
1
2
4. Locate the other back stretcher bar (C) and gently
slide the lock pins into the upper slot holes on the
side panels.
5
A
12

7
VANITY INSTALLATION INSTRUCTIONS
Note: A t this stage it may be easier to install the faucet
and drain kit (not included) to top (B) per the
manufacturer’s instructions, before moving on to Step 6.
6.
Apply stain free silicone caulk (not included) to the top
edge of vanity (A). With the help of another adult, gently
lower top (B) onto the vanity (A). Wipe away any
excess caulk with a soft cloth, and wait approximately
24 hours for it to dry.
7. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in or out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
6
1
2
2
A
B
7
2
2
2
2
22
a
1
a
3
b
1
1
c
1
c
3

8
VANITY INSTALLATION INSTRUCTIONS
8. Gently open the top tip-out door and remove the
plastic tray by lifting/sliding up (per the diagram).
9. Re-hang the plastic tray back inside of the top tip-out
door. If this door needs to be adjusted, please refer
to the hinge adjustment steps below.
8
1
2
9
2
1
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
per the manufacturers’ instructions to
complete the installation.

9
CARE AND MAINTENANCE
WARRANTY
The manufacturer warrants this item against defects in materials and workmanship for a period
of one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer. The
manufacturer is not accountable whatsoever for product installation during the warranty period.
There is no further expressed warranty. The manufacturer shall not be legally responsible for
incidental, consequential or special damages arising at or in connection with product use or
performance except as may otherwise be accorded by law. The manufacturer disclaims any and
all implied warranties.
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The ceramic top can be cleaned using standard ceramic cleaning agents available at your local
supplier.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.

10
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST,
Monday - Sunday. You could also contact us at [email protected] or visit www.lowespartsplus.com.
PART DESCRIPTION PART #
BTop 1790VA-24-VC TOP
CBack Stretcher Bar 1790VA-24-BACK BAR
DTip-out Door 1790VA-24-TIP-OUT DOOR
ELeft Door 1790VA-24-201-
DOOR SET
FRight Door
BB Handle HN-A5917-BN
C-90-107
CC Hinge
AA Touch-Up Pen OF-0010
DD
Plastic Tray 1790VA-24-PLASTIC TRAY
EE
Leveler T-1007
Printed in Vietnam
BB CCAA DD EE
E
B
F
C
D