LF style selections LW153C14-W User manual

Lowes.com
xxxxxxx
Questions, problems, missing parts? Before returning to you retailer, call our customer service
department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.
1
ITEM #0693230/0693231
MODEL #LW153C14-W/LW153C14-B
VANITY WITHTOP
Français p. 6
Español p. 11

Lowes.com
HARDWARE CONTENTS (shown actual size)
A
B
Top
Vanity cabinet
BB
Anchor
Screw
Qty . 4
Qty . 4
CC
Template
(not shown actual size)
Qty . 1
2

Lowes.com
Helpful Tools (not included): Carpenter’s level.
Tools Required for Assembly (not included): Sealing compound, Liquid nail-type construction
adhesive,Phillips screwdriver.
1. Place template (CC) on the wall use it as a guide
to determine the insertion points of the anchors
(BB). Use a pencil (not included) to ensure
cabinet (B) will be level.
CAUTION: Take care when moving the product and never drag the pieces across the floor as this
will cause damage to the joints. Be careful not to drop anything hard or heavy onto the surface or
comers of the sink.
3
Estimated Assembly Time: 30 minutes

Lowes.com
BB
BB
BB
BB
2. Use a 3/16 in. drill bit (not included) to drill 1/4
in. pilot holes at marked locations. Insert
anchors (BB) into the holes until the flanges on
the anchors (BB) are flush against the wall.
3. Insert screws (AA) through holes of vanity back
into anchors (CC) tighten securely.
4. Use a construction adhesive (not included) to
attach the top (B) to vanity (A).
Note: It is recommended you obtain appropriate
recommendations from local hardware supplier
on adhesive and caulking.
BB
AA x 4
4
Note: The gap between the doors can be change by
making adjustments to the preassembled hinges
with a Philips screw clockwise. To increase the gap
between the doors, turn the screw counterclockwise.
Screw
Anchor

Lowes.com
5
Screw
Anchor
1501
1502
Dust frequently with a clean, soft, dry, lint-free cloth. Use only polishes that contain detergents,
emulsifiers and mineral oil. Avoid using silicone cleaners and waxes. Clean up excess water and
spills immediately. Water left over a long period of time will cause white spots in the finish.