LG-Ericsson LDP-7008D User manual

This user’s guide is to be used for
LDP-7008D
Digital Phone
Configured on eMG80 Phone System
For more info, contact us at:
Normandeau Technologies
[e-mail]
[phone]
BASIC FEATURES
MAKE AN OUTSIDE CALL
1) Lift handset and dial 9for next available line then dial number
2) Or press a LINE button for outside dial tone then dial number
ANSWER A CALL RINGING AT YOUR STATION
1) Lift handset or press SPEAKER button for hands free
ANSWER A CALL RINGING AT ANOTHER STATION
1) Lift handset or press SPEAKER button for hands free
2) Dial 7followed by the station number to pick up
ANSWER A CALL RINGING AT GROUP MEMBER STATION
1) Lift handset or press SPEAKER button for hands free
2) Dial 566 for ringing member station
3) OR press PICK-UP soft key for ringing member station
TRANSFER CALL TO EXTENSION
1) While on Call press TRANS/PGM button or TRANS soft key
2) Dial the Station number or press pre-programmed flexible button
3) Announce Call (supervised transfer only)
4) Hang up
TRANSFER CALL TO VOICEMAIL
1) While on Call press TRANS/PGM button or TRANS soft key
2) Press CALL BACK button
3) Dial the Station number or press pre-programmed flexible button
4) Hang up
MAKE AN INTERCOM CALL
1) Lift handset or press SPEAKER button
2) Dial the Station number or press pre-programmed flexible button
PLACE A CALL ON HOLD
Press the HOLD/SAVE button to retain call at your station
RETRIEVE CALL ON HOLD
Press flashing LINE key on the phone to retrieve your held call
User’s Guide

PAGE (ALL CALL)
1) Lift handset
2) Dial 5 4 9 then wait for tone before speaking
3) Hang up
REDIAL
1) Press the REDIAL button or soft key, scroll through last 10 dialed numbers using the navigation
buttons (16 & 24 button handsets) or volume button (4 & 8 button handsets)
2) Press HOLD/SAVE button
ADVANCED FEATURES
MAKING A CONFERENCE CALL
1) Dial first party
2) Press CONF button or soft key
3) Dial 9 followed by phone # or dial another extension
4) Continue above steps until all parties are connected
5) Press CONF button twice to commence conference
#Note that you must have a CONF button programmed and conference access. The number of
external members is limited to the number of lines on the system. All lines are in use for the
duration of the Conference call.
CHANGE HEADSET/SPEAKER MODE
1) Press TRANS/PGM button
2) Dial 6 1 (Change Speaker key to headset key)
3) Select 1(For Speaker) 0(For Headset)
4) Press HOLD/SAVE or OK button
Speakerphone is disabled while phone is in headset mode; the speaker key becomes an ON/OFF toggle
button for the headset.
CALL FORWARD TO STATION OR OUTSIDE LINE
1) Dial 5 5 4
2) Select 1for Unconditional All Calls
3) After selection dial Station number (e.g. 1000), or dial 9 followed by outside phone
number
Calls will terminate at the destination station/number VM
CANCEL CALL FORWARD
Dial 5 5 4 followed by the # button to cancel
MUTE
Press MUTE soft key to switch ON/OFF the microphone
DO NOT DISTURB (DND) –Not available Attendant station
Press DND button OR dial 5 5 3 to switch ON/OFF
SET INTERCOM ANSWER MODE
This determines how your Station will ring when receiving an intercom call
1) Press TRANS/PGM button
2) Dial 1 3 and select
1. Hands free (Auto answer after a BEEP tone)
2. Tone ring
3. Privacy announce (Auto Answer but you must pick-up the handset to talk)
3) Press HOLD/SAVE button or the OK button
PROGRAM SPEED DIAL NUMBER
1) Press TRANS/PGM button
2) Press SPEED button - Display will show next available speed bin number(Personal Speed
bin range 000-099)
3) Press HOLD/SAVE button to select next available or dial desired speed bin number to
edit specific number
4) Dial 9for outside line
5) Enter the phone number you wish to store
6) Press HOLD/SAVE button
7) Enter name label using number chart
8) Press HOLD/SAVE button
9) Press SPEAKER button to exit

SPEED DIAL ACCESS/USE
1) Lift handset and/or press SPEED button
2) Dial speed bin number
a. Personal: (000-099)
b. System:(2000 through 4999)
SPEED DIAL BY DIRECTORY SEARCH
1) Press SPEED button twice
2) Select corresponding number for the Phone Book
Dial 1 View Station name for internal extensions
Dial 2 Private Directory for personal speed dials
Dial 3 Public Directory for system speed dials
3) Dial Letter using the number chart and/or scroll up and down using either volume key or
navigation dial.
4) Select Station or Speed bin by pressing the HOLD/SAVE button
PROGRAM FLEXIBLE BUTTON
1) Press TRANS/PGM button
2) Press flexible button to program
3) Dial feature e.g. Station No. (200), group number (VM 401) or desired button codes (see
list)
4) Press HOLD/SAVE button
5) Press SPEAKER button to exit
ALARM SILENCE CODE –Dial 565 from attendant phone
BUTTON CODES FOR FLEXIBLE BUTTON PROGRAMMING
CONF TRANS/PGM 9 1
CALLBK TRANS/PGM 9 2
DND TRANS/PGM 9 3
REDIAL TRANS/PGM 9 7
MUTE TRANS/PGM 9 5
Example: CONF button. Press TRANS/PGM then flex key to program. Press TRANS/PGM again
followed by 9 1 then dial HOLD/SAVE to save.
TO ERASE FLEXIBLE BUTTON
1) Press TRANS/PGM button
2) Press flexible button to program
3) Press HOLD/SAVE button
VOICEMAIL
ACCESS VOICEMAIL ON-SITE
• Press VM Access button OR dial preconfigured Group number for Voice Mail (Typically 401)
• Enter password (Default is extension number followed by a 9). System password is looking
for extension followed by password. For example: extension 100 with a password of 1234 will
be entered as 1001234when prompted for password
• Follow the voice prompts to navigate through voice mail, mail box configuration, voice mail
greeting, or password
REMOTE ACCESS TO VOICE MAIL
• Once your Voice Mail has answered your call and during your greeting dial the # key
• Enter password (Default is extension number then *, i.e. 100*)
• Follow the voice prompts to navigate through voice mail, mail box Configuration, voice mail
greeting, or password