LG AG-S230 User manual

OWNER’S MANUAL
Please read this manual carefully before operating
and keep it for future reference.
www.lg.com
SAC34026210_1
3D GLASSES
AG-S230
AG-S250
AG-S270

CAUTION
Please read these safety instructions carefully to en-
sure your personal safety and to prevent damage.
1If you experience difficulty while viewing 3D
images with the 3D glasses, you may have
some problems with your eyesight.
2
You may experience headaches or fatigue
when viewing 3D images through the glasses
for too long.
If you experience headaches, •• fatigue, or
dizziness, stop watching immediately.
3Do not drop objects onto the product or
import force to the product.
This may result in electric shock or fire.
4
Do not use your product near a humidifier or
kitchen counter.
This may result in electric shock or fire.
5
Do not use the product while charging it! Use
the
product only after disconnecting the USB cable.
Failing to do so may result in fire or electric
shock.
6Do not disassemble, repair or modify the
product or its parts.
Failing to do so may result in damage to the
product or a malfunction.
7The product may be easily taken off after
putting on for some people.
8The following people should not use this
product: Pregnant women, infirm persons,
persons with heart issues, as well as persons
that become nauseous easily.
People with these conditions should not
use this product.
9When watching 3D video, do not place
anything nearby that can be easily broken.
You may mistake a 3D image for an actual
object and move your body, causing you to
break nearby objects and hurt yourself.
10
Use this product for watching 3D video only.
Do not use it for any other purpose.
Do not use the 3D Glasses as sunglasses
or reading glasses.
11
Do not spray cleaner directly onto the surface
of the product.
This may result in discoloration and
cracks and may cause the screen display
to peel off.
12
Do not let water come into contact with the
product when cleaning it. Ensure that water
does not enter the product.
This may result in electric shock or fire.
13
Since the lens of the product is easily
scratched, make sure to clean the product
with a soft cloth.
As the product may be scratched if there
is any foreign material on the cloth, make
sure to shake off any dust before using it.
14
Do not scratch the surface of the Liquid
crystal shutters with a sharp tool and do
not clean it using chemicals.
15
Do not apply force to the liquid crystal
shutter. Do not drop or bend the product.
16
When watching 3D video, ensure that you
are viewing the video within the specified
receiving range. (For more information,
refer to the specifications in this manual)
If the receiving range is out of the
specified range, the screen may not be
viewable as 3D video.
17
Flickering may be generated by the 3D
glasses (60 Hz) when watching the 3D
screen when a magnetic fluorescent lamp
(50 Hz) is on.
If you encounter this symptom, please turn
off the light and continue watching.
2

FEATURES
■AG-S230/S250/S270 are 3D glasses using RF(2.4GHz) wireless communication.
■Realistic 3D video can be viewed by connecting to TV supporting 3D function.
■You can enjoy movies or pictures made as 3D.
ACCESSORIES
PART NAMES
USING 3D GLASSES
Button Operation LED Indication
Power On Press the Power button once. The red LED blinks once.
Power Off Press and hold down the Power button
(2 second ~3 second) The red LED blinks three times.
Auto Off*1
The power is automatically turned
off if no signal is transmitted for
1 minute. It is turned off after no user
movement for 10 min.
The red LED blinks three times.
Battery
(Lithium polymer)
discharge
-
If the battery is discharged, the LED
blinks for 1 minute and turns off
automatically.
* When charging is completed, the
LED is lit green.
Automatic Channel
Search
Press the power button for at least 8
sec.
After green LED flashes on and off, it is
turned off when the search succeeds.
3
ENGLISH
!
NOTE
▶The accessories represented in this manual may differ from the actual appearances.
!
*1
▶The Auto Off function automatically turns the 3D glasses off if it senses no signal from the 3D
signal emitter on the TV. A change in the distance or angle from the 3D signal emitter when the
user moves can cause the Auto Off feature to activate.
▶Automatic power off function automatically turns off the power when there is no movement for
the continued duration of 10 min. during normal operation.
3D Glasses 8-pin mini USB
cable
Manual CD Quick Start
Guide
Pouches
Liquid crystal
Shutter
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
Liquid crystal
Shutter
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
Liquid crystal
Shutter
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
AG-S230 (For Children) AG-S250 (For Audlts) AG-S270 (Made of Metal)

4
CHARGING THE GLASSES
1Connect the USB port located under the power button on the glasses to the USB port of the
TV or PC using the supplied 8-pin mini USB cable as shown by the figure.
2Charge the glasses until the LED is green. The glasses will fully charge in about 1 hours 50
minute
.
TROUBLESHOOTING
Problem. Suggestion.
Q. The glasses do not work.
A. The battery (Lithium Polymer) may be discharged, charge the
battery with the 8-pin mini USB cable.
A. Check the 3D function settings of your TV.
Q. The led LED blinks continuously.
A. This occurs when the battery (Lithium Polymer) is discharged. In
this case, charge the battery with the supplied 8-pin mini USB
cable.
Q. I charged the glasses with the
8-pin mini USB cable, but it is
not charged.
A. Check if the 8-pin mini USB cable is properly connected to the
product.
ENGLISH
!
NOTE
▶While charging: The LED is red.
▶When charging is complete: The LED is green.
▶When the battery is discharged: The LED blinks for 1 minute and turns off automatically.
!
CAUTION
i.e) AG-S250
!
CAUTION ▶
Do not insert the supplied 8-pin mini USB cable in the reverse direction. Otherwise, this may
cause damage to the product.
▶The 3D glasses do not work while charging them with the USB cable.
▶If you use a USB cable other the one (8-pin mini USB) supplied with the product, the
product may be damaged.
▶This equipment shall be powered with USB 2.0 or higher.

5
SPECIFICATIONS
AG-S230 / S250 AG-S270
Shutters Liquid crystal Liquid crystal
Contrast Ratio Max. 1000:1 Max. 2000:1
Transmittance Over 34 % Over 34 %
Field Rate
120 fields/s 120 fields/s
Open Time Under 2.0 ms Under 2.0 ms
Close Time Under 0.3 ms Under 0.3 ms
Weight About 36 g About 47 g
Power Supply
· USB Cable: 8-pin mini USB cable
· Battery: 80 mA/h
· Operating time when On: About 40
hours
· USB Cable: 8-pin mini USB cable
· Battery: 75 mA/h
· Operating time when On: About 40
hours
Operating
Temperature 0 °C to 40 °C 0 °C to 40 °C
Storage Temperature -20 °C to 60 °C -20
°C to 60 °C
ENGLISH
☞The images and specifi cations presented in this user manual are subject to change without prior notice for quality
improvement purposes.
Class B ITE (Information Technology Equipment)
This equipment satisfies the EMC requirements and is intended for use in all environments, including the
domestic environment.
(Class B ITE produces less electromagnetic emissions than Class A ITE.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operated
the equipment under FCC rules.
LG
AG-S230
AG-S250
AG-S270