MFL68107503
All company names and product names in this guide are trademarks or registered
trademarks of the respective companies.
The TM and ® marks may be omitted in this guide.
Sold by: KDDI CORPORATION, OKINAWA
CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan Inc.
Manufactured by: LG Electronics Inc.
December 2013, 1st Edition
Please read this manual rst
LGL23 Setting Guide
Thank you for purchasing the "G Flex" (simply called the "product" from here on).
This "Setting Guide" describes the basic operations and initial settings for
using the product. For descriptions on various functions, refer to the "Basic
Manual" or the "Full Instruction Manual" (Japanese only) on the au website.
Before using the product, read the "Exemptions" and "Safety
Precautions" in the "Basic Manual" to ensure correct and safe use.
■Basic operations to input characters
This product uses the software keyboard displayed at the bottom of the screen to
enter characters.
Tap the keys on the screen to enter characters.
a
b
c
d
g
b
h
i
fe
a Switches to voice typing.
b Moves the cursor to the right/left and changes the
range of characters when converting characters.
c Displays the list of Symbol and Emoticon.
d Switches the Input Mode.
e Switches between uppercase and lowercase
characters, or adds dakuten or handakuten.
f Inputs the characters assigned to each key.
g Deletes the character to the left of the cursor.
h Inputs a space and converts characters in
Hiragana-Kanji input mode.
i Determines the entered characters or inserts
a line feed.
Flick input
You can enter a desired character by icking the
key up, down, right, or left without tapping the key
repeatedly. Touch and hold the key to display the
candidates that can be displayed by icking (ick
guide). Flick the key in the direction of a desired
character to enter that character.
Flick guide
LG Japanese Keyboard
Touch and hold and tap " " to display LG
Japanese Keyboard screen.
Keyboard Type (10-key, QWERTY, handwriting), Input
Mode (Hiragana-Kanji, half-width alphabet, etc.), and
Input Method can be switched.
LG Japanese Keyboard settings can also be made.
■Basic operations of the keys
LGL23MKA
Electronics
FCC ID:ZNFLGL23
0168
Power key
●Power ON
Press and hold .
●Power OFF
Press and hold → Select "Power o" → "OK" .
●Sleep mode
Press while in operation to switch to sleep mode
●Cancel sleep mode
Press
while in sleep mode to display the unlock
screen. Swipe on the unlock screen to unlock.
Display (Touch panel)
Directly touches an item or key displayed on the
screen to operate.
Home key
Uses it to display the home screen, etc.
Menu key
Displays the option menu that can be used during an operation.
Back key
Goes back to the previous screen.
■Basic operations of the touch panel
Tap
Lightly touch a
menu or item and
immediately release
your nger.
Slide
While your nger is
lightly touching the
screen, move it in the
desired direction.
Touch and
hold
Keep touching an
item with your nger.
Flick (Swipe)
Operate the screen
by quickly moving
your nger up, down,
right, or left.
●Learning the Basic
Operations
Describes names of parts and
basic operations.
●Setting a Google
Account
Sets up to use services such as
Gmail and Google Play.
●au Easy Settings
au Easy Settings
●Setting Wireless LAN
(Wi-Fi®)
Sets the wireless LAN (Wi-Fi®)
function.
●E-mail Settings and
Backup
Sets up to use e-mail (@ezweb.
ne.jp).
●Making Calls
You can also make a call using
call logs or contacts.
●Receiving Calls
You can also receive a call in
sleep mode.
●Transferring Contacts
You can transfer your contacts
data from your old au phone.
●Backup from Main Unit
to microSD Memory Card
Describes how to back up data
from the product main unit to a
microSD memory card.
●Reducing Battery
Consumption
You can reduce the battery
consumption by setting up Power
saver.
Learning the Basic Operations
Setting Wireless LAN (Wi-Fi®)
By using the wireless LAN (Wi-Fi
®
) function, you can access to the Internet using a wireless LAN environment built in your home or a public wireless LAN environment away from home.
When setting the wireless LAN (Wi-Fi
®
) as described in this guide, you need to be in an environment where the radio waves can be received from the wireless LAN device or public
wireless LAN that you want to access to.
Check the following information before setting the wireless LAN (Wi-Fi®) function.
SSID
The name set for the wireless LAN device or public wireless LAN service that you are connecting to
Password The password for connecting to the wireless LAN device or public wireless LAN service
* Connection to all public wireless LAN services is not guaranteed.
* You may need a separate contract with a service provider to use some public wireless LAN services.
* Enabling the wireless LAN (Wi-Fi®) function uses a lot of battery power. We recommend turning o the wireless LAN (Wi-Fi®) function when not using it.
The wireless LAN (Wi-Fi®)
function is enabled, and the
available wireless LAN (Wi-
Fi®) networks are detected.
On the home
screen, tap " "
Tap "Basic" →
" "
Tap "Wi-Fi" Tap "Continue"*1Tap "OK" → " "
*1 "Wi-Fi tutorial" will not be displayed when setting up for the second time or later. If you want to display
it again, tap "Wi-Fi" then tap " " → "Interactive tutorial".
"OK" → Tap the SSID
of the wireless LAN
(Wi-Fi
®
) network that
you are connecting to
* If the wireless LAN (Wi-Fi®)
network that you want to
connect to is not displayed,
tap " " → "Add network"
and register it manually.
Tap "OK" → Enter
Password → "Connect"
* This step is not required
if you select a wireless
LAN (Wi-Fi®) network
without security settings.
The setting is complete
when appears at the
top of the screen.
au Easy Settings
■Setting au ID
This section describes how to set up an au ID on the initial settings screen, which appears when you rst turn on the power after purchasing the product.
The settings can be changed with the "au ID Setting" application.
au ID * Register your au phone number or any other character string as an au ID.
au ID Password Register the password for the au ID.
* The same au ID as another user's cannot be registered.
Tap "Next"
Tap "Registration"
Conrm the contents → Tap
"OK"
Tap "au IDの設定・保存 (Set/
Save au ID)"
Enter the security code
→ Tap "OK"
Set up password → Conrm
"注意事項 (Precautions)" and
"利用規約 (Terms of use)" →
Tap "利用規約に同意して新規登録
(Agree with the terms of use
and newly register)"
The screen displays
the setting has been
completed.
* Tap "設定画面へ (Go to setting
screen)" and register information
required to retrieve password.
Enter 生年月日 (Date of birth),
秘密の質問 (security question),
and 秘密の質問の答え (answer
for the question) → Tap "入力完
了 (Done)" → "設定 (Settings)"
→"終了 (Finish)"
Tap "Next"
* If there are data to hand over,
tap "Agree, and next" then hand
over data.
Place check marks next
to data you want to
backup then tap "Agree,
and next".
* If you do not need to use this
service, tap "Next".
If you want to use au Widget/
LISMO, conrm "Terms of
Service"/"Outline of Service"
then place check marks next
to them → "Agree, and next".
* If you do not need to use this
service, tap "Next".
Conrm "Terms of
Service"/"Outline of Service"
of the Service you utilize and
place check marks next to
them → "Agree, and next".
* If you do not need to use this
service, tap "Next".
Conrm the contents →
Tap "Activate"
* This screen appears only when
leaving check mark on 3LM (Loss
or Theft Measures ※).
Tap "Finish"
Setting a Google Account
You can use online services provided by Google, such as Gmail and Google Play, by setting up a Google account.
This section describes how to set up an account on the initial settings screen, which appears when you rst switch on the power after purchasing the product.
User name
Register your Google account (user ID) and the characters that you want to use as your mail address.
You can register any user name, but you cannot set the same user name as another user's.
Password Register a password for using your Google account.
Select "English
(United States)"
and tap "Next"
Tap the network
that you will
connect to
* Tap "Next" if you
do not need to set
Internet connection.
Enter your
password and
tap "Connect"
→ Conrm the
connection →
Tap "Next"
* This step is not
required if you select
a Wi-Fi® network
without security
settings.
Tap "No"
* If you already have a
Google account, tap
"Yes".
Tap "Get an
account"
Enter your first and
last names and tap
" " → Enter your
email address and tap
" " → Enter your
password and tap " "
*
Email addresses already
being used by another
user cannot be used.
* Enter the password
twice for conrmation.
Choose a security
question, answer,
and recovery email
address → Tap " "
*
Recovery email
address will be used in
case you forget your
password. Input can be
omitted.
Tap "Not now"
* If you are joining
Google+, tap "Join
Google+".
Conrm the
contents and tap
" " → Enter the
text displayed
then tap " "
Tap "Not now"
* If you are purchasing
applications from
Google Play, enter
your Card number
and tap "Save".
Conrm the
contents and tap
backup method →
Tap " "
Conrm the
contents and tap
" "
Select front
touch button
combination and
theme → Tap
"Next"
Enter your
phone name
then tap "Done"
