LG G0910 User manual

GD910 User Guide -ENGLISH
Congratulations on your purchase of the advanced
and compact GD910 phone by LG, designed to
operate with the latest digital mobile communication
technology.
Some of contents in this manual may differ from your
phone depending on the software of the phone or your
service provider.
Disposal of your old appliance
1When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/EC.
2All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
5. Complies with EEE regulations.

Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void
the user's authority to operate the equipment. “
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device is not intended for sale in the USA.

Part 15 Class B Compliance
This device and its accessories comply with part15 of FCC rules.
Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received,
including interference that may cause undesired operation.
Body-worn Operation
This device has been tested for typical body-worn operations
with the distance of 0.79inches (2.0cm) from the user’s body.
To comply with FCC RF exposure requirements, a minimum separation distance
of 0.79inches(2.0cm) must be maintained from the user's body.
Additionally, Belt clips, holsters & other body-worn accessories may not contain
metallic components.
※ Warning Statement
This device is approved for wrist-worn only. To ensure compliance with FCC RF exposure
requirements, a separation of 1.0cm or more should be kept between the front of the watch
and the rest of the user's body while it is transmitting. The device should NOT be worn on
the inside of the wrist(palm side) or in any other configurations during transmission.
All applicable operating configurations are specified by three types; first mode is hands-free
wireless Bluetooth mode, the second mode is Speaker mode, the third mode is data transmission mode.
We'll provide these similar information and instructions separately to the user on
a single page pamphlet, within the product packing, to ensure that users are aware of the
operating requirements even if they choose not to read the manual instructions.

11
Installing the SIM card
1. Remove the SIM cap cover.
- Use the SIM cap tool to open the SIM cap cover.
WARNING: Do not remove the SIM cap cover when the
phone is switched on, as this may damage the phone. SIM
cap cover is related with power of phone.
2. Install the SIM card.
Use your SIM cap tool when installing the SIM card.
Insert the SIM card into the SIM cap tool. Make sure the
gold contact area on the SIM card is facing downwards.
Slide the SIM card into the SIM card holder.
A B

12 LG GD910 | User Guide
* Remove the SIM card.
- To remove the SIM card, gently push the edge of the SIM
card and lift it away from the SIM card holder.
A B
C
3. Replace the SIM cap cover.
Place the cover over the SIM
card holder and close the SIM
cap cover. Ensure that the SIM
cap cover align with the SIM card
holder.
Installing the SIM card

13
Getting to know your phone
Parts of the phone
Send key
- Dials a phone number and answers
incoming calls.
- Open the call history menu in your home
screen. Calls to the recent number by
pressing for two seconds.
- Opens the option list when using the menu.
Back/Clear key
- Go to previous menu when using the
menu.
- Open the voice commend menu in your
home screen by pressing for two seconds.
- Use for quick access to Voice command
feature in your home screen by pressing for
two seconds.
End/Power key
- End menu and go to main clock.
- Turns the phone on/off by pressing for two
seconds.
Main screen
Speaker
Camera lens
Send key
Back/Clear key
End/Power key
Microphone

14 LG GD910 | User Guide
Getting to know your phone
Charging Pin
SIM cap release
SIM cap cover
SIM card socket
WARNING: Do not remove the SIM cap cover when the
phone is switched on, as this may damage the phone.
SIM cap cover is related with power of the phone.
WARNING: Do not use your fingernail when removing
the SIM cap cover.

15
Charging your phone
1. Plug the power adapter into a working electrical outlet.
2. Connect the power adapter to the charging clip.
A B C
3. Connect the charging clip to back of the phone. Make
sure that charging pins are properly aligned with the
pins on the clip.
C
A B
D
Charging Pin

16 LG GD910 | User Guide
4. When connecting the charger, the battery will begin to
charge. If the “Battery full” message appears on the
screen, charging battery is completed.
WARNING: SIM cap cover is related with power of the
phone. Before charging, please check the SIM cap cover is
placed on your phone.
NOTE: The battery must be fully charged initially to improve
battery lifetime. Disregard the first “Battery full” message
and keep the phone on charge overnight.
Your home screen
Your GD910 has a touchscreen. From here
you can access menu options, make a
quick call and change your profile - as well
as many other things.
Touchscreen tips
•There’s no need to press too hard, the touch screen is
sensitive enough to pick up on a light touch.
•Use the tip of your finger to touch the option you require.
Be careful not to touch any other keys around it.
•Don’t cover the phone with a case or cover as the touch
screen will not work with any material covering it.
Getting to know your phone

17
•When the screen light is off, to prevent indiscreet action
of the touch keys, the touch protection function is
automatically enabled. (In this case, the touch screen
will not work even if they are pressed.) To disable touch
protection, press and hold the any keys on the right side
of the phone.
•Whenever yourGD910 is not in use, it will return to the
lock screen.
Get in touch with your GD910
The controls on the GD910 touch screen change
dynamically, depending on the task you are carrying out.
Home screen: The User Interface is based on five types
of Home screens. To swap between the home screens just
wipe quickly over display from left to right or from right to
left.

18 LG GD910 | User Guide
Opening Applications: To open any application, simply
touch its icon.
Scrolling: Drag from side to side to scroll. On some
screens, you can also scroll up or down.
Getting to know your phone

19
Touch interaction legend
Tuch Down Touch
Down & up
Touch
Down & Hold
Touch
Hold & Up
Tuch Down & Drag
(Up oDown)
Tuch Down & Drag
( Down oUp )
Tuch Down & Drag
(Left oRight)
Tuch Down & Drag
(Right oLift)
Tuch Down &
Hold & Drag
(Up oDown)
Tuch Down &
Hold & Drag
( Down oUp )
Tuch Down &
Hold & Drag
(Left oRight)
Tuch Down &
Hold & Drag
(Right oLift)
Flicking interaction legend
Flicking
(Up oDown)
Flicking
( Down oUp )
Flicking
(Left oRight)
Flicking
(Right oLift)

20 LG GD910 | User Guide
When the screen light is off, press the
clear key for twice on the right side of
the phone to disable touch protection
and enter the home screen.
The home screen will provide a four
way arrow pad. To open your top
menu, slide your finger across from
right to left for twice.
Menu map
Contacts
1. New contact
2. Search
3. Speed dials
4. Groups
5. Settings
6. Information
Utilities
1. Tools
2. Organiser
3. Alarms
4. Voice recorder
5. Multimedia
Messaging
1. New message
2. Inbox
3. Draft
4. Outbox
5. Sent items
6. Templates
7. Emoticons
8. Settings
Settings
1. Bluetooth
2. Profiles
3. Screen
4. Phone
5. Call
6. Connectivity

21
Calls
Making a call or a video call
1To open your top menu, slide your finger across from
right to left.
2Select Video call or Voice call.
3Type in the number on the keypad screen. To delete a
digit, press the Clear key .
4Press the Send key to make the call.
5To end the call, press the End key .
NOTE: Your phone has a Voice command feature that also
lets you make calls by phone number or name.
TIP! To enter + in order to make international calls,
touch and hold down 0 key.
TIP! You can Save number, Send message, Search contacts
or set Alphabet on/off by touching and tapping .
Calling your contacts
It’s easy to call anyone whose number you have stored in
your Contacts.
1From the home screen, slide your finger across from
right to left for twice. Touch Contacts and select
Search.
2Scroll through the contact list or enter the first letter(s) of
the contact you want to call.

22 LG GD910 | User Guide
Calls
3From the list, touch the contact you want to call and
select the number to use if there is more than one for
that contact.
4Press the Send key and choose Voice call or Video
call from the options menu.
Answering and rejecting a call
When your phone rings, press the Send key to answer.
Press the End key to reject the incoming call.
TIP! You can send a message to explain why you
do not receive an incoming call by selecting and using
Excuse message before you reject an incoming call.
Adjusting call volume
To adjust the volume during a call, press the Clear key
and scroll up and down.
In-call options
You can hold a call by pressing the number displayed in
your home screen.
Touch to search your contacts during a call.
Touch to turn the speaker phone on.
To open the options menu during a call, press the Send key
. You can choose from the following:

23
Mute - You can turn the microphone off so the person you
are talking to cannot hear you.
Dialpad - You can open a numerical keypad for typing in
numbers, e.g. when dialing call centres or other automated
telephone services.
Add call - You can make a second call. Dial the number
or search your contacts then touch to connect the call.
Both calls will be displayed on the call screen. Your initial
call will be locked and put on hold. To end one or both calls
press the End key .
NOTE: You will be charged for each call you make.
Record - You can record the clip during a call.
Go to message - You can check your messages.
DTMF off - You can turn off the DTMF during a call. DTMF
lets you use numerical commands to navigate within
automated calls. DTMF default is set to on.
End call - You can end the call.
Speed dialling
You can assign a frequently-called contact to a speed dial
number.
1From the home screen, slide your finger across from
right to left for twice. Touch Contacts and select Speed
dials.
2Your voicemail is already set to speed dial 1. You cannot
change this. Touch any other number to assign it to a
speed dial contact.

24 LG GD910 | User Guide
3Your address book will open. Select the contact you
want to assign to that number by touching their phone
number once. To find a contact tap the search field
box and enter the first letter of the name of the contact
required.
To call a speed dial number, from a numerical keypad
screen, press and hold the assigned number until the
contact appears on the screen.
Viewing your call logs
From the home screen, press the send key then scroll left
and right. Choose to view:
All calls - View a complete list of all your dialled, received
and missed calls.
Dialled calls - View a list of all the numbers you have
called.
Received calls - View a list of all the numbers that have
called you.
Missed calls - View a list of any calls you have missed.
TIP! From any call log select the Send key to open the
options menu and then select Delete to delete selected items.
TIP! Touch any single call log entry to view the date, time and
duration of the call.
Calls

25
Changing the call settings
1From the home screen, slide your finger across from
right to left for twice. Touch Settings and select Call.
2 From here you can adjust the settings for:
Call divert - Choose whether to divert your calls.
Call waiting - If call waiting is activated, the handset is
also able to warn you about an incoming call when you
are already on a call.
Call barring - Select which calls you would like to be
barred.
Fixed dial numbers - Select Fixed dial number to turn
on and compile a list of numbers which can be called
from your phone. You’ll need your PIN2 code, which is
available from your operator. Only numbers within the
fixed dial list can be called from your phone.
Excuse message - You can send a message to explain
why you do not receive an incoming call by touching
and using “Excuse message” before you reject an
incoming call.
Call costs - View the charges applied to your dialled
calls. This service is network dependent; some operators
are unable to support this.
Call durations - View the amount in kilobytes of all
received data, sent data or both.

26 LG GD910 | User Guide
Common setting
•Call reject - Slide the switch to On to highlight the Reject
list. You can touch the text box to choose from all calls,
specific contacts or groups, those from unregistered
numbers (those not in your contacts), or no caller ID.
Touch Save to change this setting.
•Send my number – Choose whether to display your
number on an outgoing call.
•Auto redial - Slide the switch left for On or right for Off.
•Answer mode - Choose whether to answer the phone
using the send key or any key.
•Minute minder - Slide the switch left to On to hear a
tone every minute during a call.
•BT answer mode - Select Handsfree to be able to
answer a call using a Bluetooth headset, or select
Handset to press a handset key to answer a call.
•Save new number - Select Yes to save a new number.
TIP! To scroll through a list of options, touch the
last item visible and slide your finger up the screen. The list
will move up to display more items.
Video call setting - Touch Video call setting and select
the settings for your video calls. Decide whether to use still
image, then select one and/or switch on the mirror to see
yourself on screen when making a video call.
Calls

27
Searching for a contact
1 From the home screen, slide your finger across from
right to left for twice. Touch Contacts and select
Search.
TIP! From a numerical keypad screen, you can touch to
open the contacts and search for a contact you want.
2Scroll through the contact list or enter the first letter(s) of
the contact you want to call.
Your contacts will bring up a list of contacts
corresponding to the letters you have entered.
3 From the list, touch the contact you want to call and
select the number to use if there is more than one for
that contact.
4Press the Send key and choose Voice call or Video
call from the options menu.
Adding a new contact
1From the home screen, slide your finger across from
right to left for twice. Touch Contacts and select New
contact.
2Choose whether to save the contact to your Handset
or USIM.
3Enter the first and last name of your new contact. You do
not have to enter both, but you must enter at least one.
Contact