LG F1258RD User manual

Washing Machine
OWNER'S MANUAL
F1258RD
F1258RD9
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it rovides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your washing
machine.

roduct Feature
P
ontents
C
2
Warnings...............................................................................................3
Specifica ion..........................................................................................6
Ins alla ion.............................................................................................7
Care before washing...........................................................................13
Adding de ergen .................................................................................14
Func ion ..............................................................................................16
How o use washer .............................................................................17
Main enance .......................................................................................23
Troubleshoo ing guide ........................................................................27
Terms of Warran y ..............................................................................30
■Ultra Capacity
The Larger drum enables no jus higher head drop and s ronger
cen rifugal force, bu also less angling and wrinkling of he laundry.
Heavier loads, such as king size comfor ers, blanke s, and cur ains, can
be washed.
■Direct Drive System
The advanced Brushless DC mo or direc ly drives he drum wi hou
bel and pulley.
■Tilted Drum and Extra Large Door Opening
Til ed drum and ex ra large opening make i possible o load
and unload clo hing more easily.
■Water Circulation
Spray de ergen solu ion and wa er on o he load over and over.
Clo hes are soaked more quickly and horoughly during wash cycle.
The de ergen suds can be removed more easily by he wa er shower
during rinse cycle. The wa er circula ion sys em uses bo h wa er and
de ergen more efficien ly.
■RollerJets
Washing ball enhances he wash performance and reduces damage
o he clo hing. The je s spray and help umble clo hes o enhance
washing performance while main aining fabric care.
■Built-in Heater
In ernal hea er au oma ically hea s he wa er o he bes empera ure on
selec ed cycles.
■Child Lock
The Child lock preven s children from pressing any bu on o change he
se ings during opera ion.
추가선택, 예약,
추가선택, 예약,

arnings
W
3
For your sa ety, the in ormation in this manual must be ollowed to minimize
the risk o ire or explosion, electric shock, or to prevent property damage,
personal injury, or loss o li e.
!
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
• Do no ins all or s ore he washer where i will
be exposed o he wea her.
• Do no amper wi h con rols.
• Do no repair or replace any par of he washer
or a emp any servicing unless specifically
recommended in he user-main enance
ins ruc ions or published user-repair ins ruc ions
ha you unders and and have he skills o carry
ou .
• Keep he area undernea h and around your
appliances free of combus ible ma erials such as
lin , paper, rags, chemicals, e c.
• Close supervision is necessary if his appliance
is used by or near children.
Do no allow children o play on, wi h, or inside
his or any o her appliance.
• Do no leave he washer door open.
An open door could en ice children o hang on
he door or crawl inside he washer.
• Never reach in o washer while i is moving. Wai
un il he drum has comple ely s opped.
• The laundry process can reduce he flame
re ardan of fabrics.
• Do no wash or dry ar icles ha have been
cleaned in, washed in, soaked in, or spo ed wi h
combus ible or explosive subs ances (such as
wax, oil, pain , gasoline, degreasers, dry-
cleaning solven s, kerosene, e c.) which may
igni e or explode. Oil may remain in he ub af er
a whole cycle resul ing in fire during drying.
So, do no load oiled clo hes.
• To avoid such a resul , carefully follow he
garmen manufac urer’s wash and care
ins ruc ions.
• Do no slam he washer door closed or ry o
force he door open when locked. This could
resul in damage o he washer.
• To minimize he possibili y of elec ric shock,
unplug his appliance from he power supply or
disconnec he washer a he household
dis ribu ion panel by removing he fuse or
swi ching off he circui breaker before
a emp ing any main enance or cleaning.
• Never a emp o opera e his appliance if i is
damaged, malfunc ioning, par ially
disassembled, or has missing or broken par s,
including a damaged cord or plug.
• Dryer is in ended for only drying ex ile ma erial.
• If he washer has been exposed o wa er, call an
au horized service provider o avoid any risk of
fire or elec ric shock.
GROUNDING INSTRUCTIONS
This appliance mus be grounded. In he even of malfunc ion or breakdown, grounding will reduce he risk
of elec ric shock by providing a pa h of leas resis ance for elec ric curren . This appliance is equipped wi h
a cord having an equipmen -grounding conduc or and grounding plug. The plug mus be plugged in o an
appropria e ou le ha is properly ins alled and grounded in accordance wi h all local codes and ordinance.
• Do no use an adap er or o herwise defea he grounding plug.
• If you don’ have he proper ou le , consul an elec rician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING :To reduce he risk of fire, elec ric shock, or injury o persons when using
he washer, follow basic precau ions, including he following:
SAVE THESE INSTRUCTIONS
WARNING :Improper connec ion of he equipmen -grounding conduc or can resul in risk of elec ric
shock. Check wi h a qualified elec rician or serviceman if you are in doub as o whe her he appliance is
properly grounded. Do no modify he plug provided wi h he appliance - if i does no fi he ou le , have a
proper ou le ins alled by a qualified elec rician.

arnings
W
4
To minimize the risk o ire in a tumble dryer, the ollowing should be observed:
• I ems ha have been spo ed or soaked wi h vege able or cooking oil cons i u e a fire
hazard and should no be placed in a umble dryer.
Oil-affec ed i ems can igni e spon aneously, especially when exposed o hea
sources Such as in a umble dryer. The i ems become warm, causing an oxida ion
reac ion in he oil. Oxida ion crea es hea . If he hea canno escape, he i ems can
become ho enough o ca ch fire. Piling, s acking or s oring oil-affec ed i ems can
preven hea from escaping and so crea e a fire hazard.
If i is unavoidable ha fabrics ha con ain vege able or cooking oil or have been
con amina ed by hair care produc s be placed in a umble dryer hey should firs be
washed in ho wa er wi h ex ra de ergen - his will reduce, bu no elimina e, he
hazard. Washed in ho wa er wi h ex ra de ergen - his will reduce, bu no
elimina e, he hazard. The ‘cool down’ cycle of umble dryers should be used o
reduce he empera ure of he i ems. They should no be removed from he umble
dryer or piled or s acked while ho .
• I ems ha have been previously cleaned in, washed in, soaked in or spo ed wi h
pe rol/gasoline, dry-cleaning solven s or o her flammable or explosive subs ances
should no be placed in a umble dryer.
Highly flammable subs ances commonly used in domes ic environmen s include
ace one, dena ured alcohol, pe rol/gasoline, kerosene, spo removers (some
brands), urpen ine, waxes and was removers.
• I ems con aining foam rubber (also known as la ex foam) or similarly es ured rubber.
like ma erials should no be dried in a umble dryer on a hea se ing.
Foam rubber ma erials can, when hea ed, produce fire by spon aneous combus ion.
• Fabric sof eners or similar produc s should no be used in a umble dryer o elimina e
he effec s of s a ic elec rici y unless his prac ice is specifically recommended by he
manufac urer of he fabric sof ener or produc .
• Undergarmen s ha con ain me al reinforcemen s should no be placed in a umble
dryer.
Damage o he umble dryer can resul if me al reinforcemen s come loose during
drying. When available a drying rack could be used for such i ems.
• Plas ic ar icles such as shower caps or babies wa erproof napkin covers should no
be placed in a umble dryer.
• Rubber-backed ar icles, clo hes fi ed wi h foam rubber pads, pillows, galoshes and
rubber-coa ed ennis shoes should no be placed in a umble dryer.

arnings
W
5
• Do no dry unwashed i ems in he umble dryer.
• I ems ha have been soiled wi h subs ances such as cooking oil,ace one,
alcohol,pe rol,kerosene,spo removers, urpen ine, waxes and wax removers should
be washed in ho wa er wi h an ex ra amoun of de ergen before being dried in he
umble dryer.
• I ems such as foam rubber(la ex foam), shower caps, wa erproof ex iles, rubber
backed ar icles and clo hes or pillows fi ed wi h foam rubber pads should no be
dried in he umble dryer.
• Fabric sof eners, or similar produc s, should be used as specified by he fabric
sof ener ins ruc ions.
• The final par of a umble dryer cycle occurs wi hou hea (cool down cycle) o ensure
ha he i ems are lef a a empera ure ha ensures ha he i ems will no be
damaged.
WARNING: Never s op a umble dryer before he end of he drying cycle unless all
i ems are quickly removed and spread ou so ha he hea is dissipa ed
• The lin rap has o be cleaned frequen ly, if applicable
• Lin mus no o be allowed o accumula e around he umble dryer
• adequa e ven ila ion has o be provided o avoid he back flow of gases in o he room
from appliacnes buring o her fuels, including open fires.
• The appliance is no in ended for use by young children or infirm persons wi hou
supervision.
• Young Children should be supervised o ensure ha hey do no play wi h appliance.
If The appliance is supplied from a cord ex ension se or an elec rical por able ou le
device, The cord ex ension se on elec rical por able ou le device mus be posi ioned
so ha i is no subjec o splashing or ingress of mois ure.

pecification
S
6
Name : Front loading washing machine
Power supply : 220–240V~, 50Hz
Size : 686mm(W)×756mm(D)×983mm(H)
Weight : 91kg
Wash capacity/Max. Watt : 15kg(2200W)
Dry capacity/Max. Watt : 8kg(2150W)
Spin speed : 1200 rpm max.
Water consumption : 180ℓ
Permissible water pressure : 0.3-10kgf/㎠(30-1000kPa)
❋The appearance and specifications may be varied without notice to raise the
units quality.
Inlet hose(1EA) Spanner
 Accessories
Control Panel
Shipping Bolts
Power Plug
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
Drum
Drain Plug Drain Pump Filter
Lower cover cap
Door
Adjustable Feet
Drain Hose
Dispenser
Air Vent for Safety
Cold Water Inlet
Back of Washer

nstallation
I
7
1. To preven in ernal damage during
ranspor , he special 4 bol s are locked.
Before opera ing he washer, remove
he bol s along wi h he rubber bungs.
• If hey are no removed, i may cause heavy
vibra ion, noise and malfunc ion.
3. Take ou he 4 bol s along wi h he rubber
bungs by sligh ly wis ing he bung. Keep
he 4 bol s and he spanner for fu ure use.
• Whenever he appliance is ranspor ed, he
ransi bol s mus be refi ed.
The appliance is fi ed wi h ransi bol s o preven in ernal damage during ranspor .
• Packing and all transit bolts must be
removed before using the washer.
󳢹When unpacking the base, be sure to
remove the additional packing
support in the middle of the base
packing.
2. Unscrew he 4 bol s wi h
he spanner supplied.
4. Close he holes wi h he caps supplied.
 Transit bolts
Install or store where it will not be exposed to temperat res below freezing or exposed to the
weather.
Properly gro nd washer to conform with all governing codes and ordinances.
The base opening m st not be obstr cted by carpeting when the washing machine is installed on a
carpeted floor.
In co ntries where there are areas which may be s bject to infestation by cockroaches or other
vermin, pay partic lar attention to keeping the appliance and its s rro ndings in clean condition at
all times.
Any damage which may be ca se by cockroaches or other vermin will not be covered by the
appliance g arantee.
 Removing transit bolts
Washer
Base Packing
Packing Suppor

nstallation
I
8
Level loor :
Allowable slope under en ire washer is 1˚
Power outlet :
Mus be wi hin 1.5 me ers of ei her side of loca ion of
washer. Do no overload he ou le wi h more han one
appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear /2cm:righ & lef side)
Do no place or s ore laundry produc s on op of
washer a any imes.
They can damage he finish or con rols.
 Installation place requirement
 Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
• Before placing the washer on tiles, apply a rubber mat under the feet.
• ever try to correct any unevenness in the floor with pieces of wood, cardboard or similar
materials under the washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning
stove,an insulating(686x756x983mm) covered with aluminum foil on the side facing the
cooker or stove,must be inserted between the two appliance.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for the engineer in the
event of a breakdown.
• With the washer installed adjust all four feet using the transit bolt spanner provided ensuring
the appliance is stable, and a clearance of approximately 20mm is left between the top of
the washer and the underside of the work-top.
• The installation instructions shall state that the openings must not be obstructed by a carpet
if it has ventilation openings in the base.
Washer
Drain Hose
Laundry
Tub
approx.
2cm

9
nstallation
I
▶ Water supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶ D n’t strip r cr ssthread when c nnecting Inlet h se t the valve.
▶ If the water supply pressure is m re than 1000kPa, a dec mpressi n device
sh uld be installed.
• Two rubber seals are supplied wi h he wa er inle hoses hese are in
order o preven wa er leaks.
• Check wa er igh ness of washing machine connec ions by urning he
ap comple ely on.
• Periodically check he condi ion of he hose and replace he hose if
necessary.
• Make sure ha here is no kink on he hose and ha i is no crushed.
• The ins ruc ions for appliances connec ed o he wa er mains by
de achable hose-se s shall s a e ha he new hose-se s supplied wi h
he appliance are o be used and ha old hose-se s should no be
reused.
 Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
 Connecting water supply hose
1. Do no use an ex ension cord or double adap er.
2. If he supply cord is damaged, i mus be replaced by he manufac urer or i s service agen s or
similarly qualified person in order o avoid a hazard.
3. Always unplug he machine and urn off he wa er supply af er use.
4. Connec he machine o an ear hed socke in accordance wi h curren wiring regula ions.
5. The appliance mus be posi ioned so ha he plug is easily accessible.
• Repairs o he washing machine mus only be carried ou qualified personnel. Repairs carried ou by
inexperienced persons may cause injury or serious malfunc ioning. Con ac your local service cen er
• Do no ins all your washing machine in rooms where empera ures below freezing may occur. Frozen hoses
may burs under pressure. The reliabili y of he elec ronic con rol uni may be impaired a empera ures
below freezing poin .
• If he appliance is delivered in he win er mon hs and empera ures are below freezing : S ore he washing
machine a room empera ure for a few hours before pu ing i in o opera ion.
 Electrical connection
CAUTION concerning the Power Cord
Mos appliances recommend hey be placed upon a dedica ed circui ; ha is, a single ou le circui
which powers only ha appliance and has no addi ional ou le s or branch circui s. Check he
specifica ion page of his owner's manual o be cer ain.
Do no overload wall ou le s. Overloaded wall ou le s, loose or damaged wall ou le s, ex ension cords,
frayed power cords, or damaged or cracked wire insula ion are dangerous. Any of hese condi ions
could resul in elec ric shock or fire. Periodically examine he cord of your appliance, and if i s
appearance indica es damage or de eriora ion, unplug i , discon inue use of he appliance, and have
he cord replaced wi h an exac replacemen par by an au horized servicer.
Pro ec he power cord from physical or mechanical abuse, such as being wis ed, kinked, pinched,
closed in a door, or walked upon. Pay par icular a en ion o plugs, wall ou le s, and he poin where
he cord exi s he appliance.
If his appliance is supplied from a cord ex ension se or elec rical por able ou le device, he cord
ex ension se or elec rical por able ou le device mus be posi ioned so ha i is no subjec o
splashing or ingress of mois ure.
CAUTION
Cold
Cold
wa er ap
Hose connec or
Sealing
washer

10
nstallation
I
 Normal Tap without thread & screw type inlet hose
 Normal Tap without thread & one touch type inlet hose
1.Unscrew he fixing screw o
a ach he ap.
2.Push he connec or up ill he
rubber packing is in igh con ac
wi h he ap. Then igh en he 4
screws.
3.Push he wa er supply hose
ver ically upwards so ha he
rubber packing wi hin in he hose
can adhere comple ely o he ap
and hen igh en i by screwing i
o he righ .
1.Un igh en he upper connec or
screw.
2.Push he upper connec or up ill
he rubber packing is in igh
con ac wi h he ap. Then igh en
he 4 screws.
3. Connec he wa er supply hose o
he middle connec or, pushing
he pla e down.
• Your machine comes wi h only
cold wa er connec ion.
• Make sure ha here are no
kinks in he hose and ha i is
no crushed.
• Make sure ha he rubber
seal is inside he hose
connec or.
• In case he diame er of he
ap is large remove he guide
pla e. • Turn he middle connec or no
o have wa er leaked.
• To separa e he wa er supply
hose from he middle connec or
shu off he ap. Then pull he
inle hose down, pushing he
pla e down.
Upper
Connec or
Upper
Connec or
Upper Connec or
Upper Connec or
Upper Connec or
Upper Connec or
Pla e
Pla e
Wa er supply hose
Wa er supply hose
Fixing screw
Fixing screw
Rubber
packing
Rubber
packing
Middle
connec or
Middle connec or
Hose
connec or
Guide pla e
Connec or
Used the horizontal tap
Horizon al ap
Ex ension ap
Square ap
Rubber
seal
Rubber packing
Rubber packing

11
nstallation
I
 Installation of drain hose
• The drain hose should no be placed
higher han 100 cm above he floor.
• Proper securing of he drain hose will
pro ec he floor from damage due o
wa er leakage.
• When he drain hose is oo long, do no
force back in o he washer. This will
cause abnormal noise.
• When ins alling he drain hose sink,
secure i igh ly wi h a s ring.
• Proper securing of he drain hose will
pro ec he floor from damage due o
wa er leakage.
This equipmen is no designed for mari ime use or for use mobile ins alla ions such as
caravans, aircraf e c.
Turn off he s opcock if he machine is o be lef for any leng h of ime (e.g. holiday),
especially if here is no floor drain(gully) in he immedia e vicini y.
When disposing of he appliance, cu off he mains cable, and des roy he plug Disable he
door lock o preven young children being rapped inside.
Packaging ma erial (e.g. Films, S yrofoam) can be dangerous for children. There is a risk of
suffoca ion ! Keep all packaging well away from children
abou 100 cm
abou 100 cm
Laundry ub
Hose
Re ainer
Tie
s rap
max. 100cm
min. 60cm
max. 100cm
min. 60cm
abou 105 cm
abou 105 cm
max. 100 cm
max. 100 cm
min. 60 cm
min. 60 cm
abou 145 cm
abou 145 cm

12
nstallation
I
 Level adjustment

Concrete floors

Wooden floors (Suspended floors)
1. Adjus ing he washing machine level properly preven s excessive
noise and vibra ion.
Ins all he appliance on a solid and level floor surface, preferably in a
corner of he room.
2. If he floor is uneven, adjus he adjus able fee as required. (do no
inser pieces of wood e c. under he fee )
Make sure ha all four fee are s able and res ing on he floor and
hen check ha he appliance is perfec ly level. (use a spiri level)
※※
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.

Tile floors (Slippery floors)
• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm
sections and stick the pieces on to the dry tile where machine is to be placed.)
※※
Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
• Wooden floors are particularly susceptible to vibration.
• To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
• If possible install the washer in one of the corners of the room, where the floor is more stable.
※※
Insert the rubber cups to reduce vibration.
※※
Rubber cups ( p/no. 4620ER4002B can be purchased from the LG spare parts department.
Important!
• Proper placement and levelling of the washer ensures long, regular and reliable operation.
• The washer must be absolutely horizontal and stand firmly in position.
• It must not “Seesaw” across corners under load.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
NOTE
Timber or suspended type flooring may contribute to
excessive vibration and unblance errors.
NOTE
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
※
It can be purchased from
hardware suppliers.
Rubber Cup
Adjus able
fee
Adjus able
fee

13
are before washing
C
1. Care Labels
Look for a care label on your clo hes. This will ell you abou he fabric con en of your
garmen and how i should be washed.
2. Sorting
To ge he bes resul s, Sor clo hes in o loads ha can be washed wi h he same wash cycle.
Wa er empera ure and spin speed and differen fabrics need o be washed in differen ways.
Always sor dark colors from pale colors and whi es. Wash separa ely as dye and lin
ransfer can occur causing discolora ion of whi e e c. If possible, do no wash heavily soiled
i ems wi h ligh ly soiled one.
Soil (Heavy, Normal, Ligh ) Separa e clo hes according o amoun of soil.
Color (Whi e, Ligh s, Darks) Separa e whi e fabrics from colored fabrics.
Lin (Lin producers, Collec ors) Wash lin producers and lin collec ors separa ely.
3. Caring before loading
 Caring before washing
 Before the first washing
 Combine large and small items in a load. Load large items first. Large items sho ld not be more
than half the total wash load.
Do not wash single items. This may ca se an o t-of-balance load. Add one or two similar items.
Selec a cycle (COTTON 60°C, add a half load of de ergen ) allow he uni o wash wi hou
clo hing.
This will remove residues from he drum ha may have been lef during manufac uring.
• Check all pocke s o make sure ha hey are
emp y. I ems such as nails, hair clip,
ma ches, pens, coins and keys can damage
bo h your washer and your clo hes.
• Close zippers, hooks and s rings o make
sure ha hese i ems don’ snag on o her
clo hes.
• Pre rea dir and s ains by brushing a li le
de ergen dissolved in wa er on o s ains like
collars and cuffs o help shif dir .
• Check he folds of he flexible gaske (gray)
and remove any small ar icles,if any.
• Check inside of he drum and remove any lef
i ems in i for nex wash cycle.
• Remove any clo hing or i ems on he flexible
gaske o preven clo hing and he gaske
damages.

14
dding detergent
A
• Main wash only ➔
• Pre Wash + Main Wash ➔ •
• Do no exceed he maximum fill line. Close he
dispenser drawer slowly. Overfilling can cause
early dispensing of he fabric sof ener which
could s ain clo hes.
• Do no leave he fabric sof ener in he
de ergen drawer for more han 2 days.
(Fabric sof ener could harden)
• Sof ener will au oma ically be added during
he las rinse cycle.
• Do no open he drawer when wa er is
supplied.
• Solven s(benzene, e c) are no allowable.
1. The Dispenser Drawer
2. Adding Fabric So tener
Adding detergent and fabric softener
Do not pour fabric softener directly
on the cloths
NOTE
De ergen for
main wash Fabric sof ener
De ergen
for pre wash

dding detergent
A
15
• The detergent sh uld be used acc rding t the
instructi n f the detergent manufacture.
• If t much detergent is used, t many suds
can ccur and this will decrease the washing
result r cause heavy l ad t the m t r.
• Use p wder detergent nly f r the fr nt
l ading washer.
❇ If suds ccur t much, pleas reduce the
detergent am unt.
• De ergen usage may need o be adjus ed
for wa er empera ure, wa er hardness,
size and soil level of he load. For bes
resul s, avoid oversudsing.
• A wa er sof ener, such as An i limescale
(Clagon) can be used o cu down on he
use of de ergen in ex remely hard wa er
areas. Dispense according o he amoun
specified on he packaging.
Firs add de ergen and hen he wa er
sof ener.
• Use he quan i y of de ergen as for sof
wa er.
❋Tips
Full load : according to
manu acturer’s recommendation.
Part load : 3/4 o the normal amount.
Minimum load : 1/2 o ull load.
• De ergen is flushed from he dispenser a
he beginning of he cycle.
1) Open he door and Table s in o he
drum.
3. Detergent dosage
4. Water so tener
5. Using the Tablets
2) Load he laundry in o he drum.
3) Close he door.

16
unction
F
 Recommended courses according to the laundry type
❋Water Temperature : Select the water temperature to the wash cycles.
Always follow garment manufacture’s care label or instructions when
laundering.
❋Pre Wash : If the laundry is heavily soiled, “Pre Wash” option is recommended.
Cycle
TUB
CLEAN
Sterilize the inside of the
washing machine
3
4
5
1
2
MEDIUM
HIGH
EXTRA HIGH
GENTLE
LOW
95
RINSE
Fabric type SPIN TEMP.
WASH
SOAK PRE
WASH
MAIN
WASH
SMALL
QUANTITY
TIME
SAVE
SANITARY Heavily soiled underwear,
work clothes, diapers, etc.
2
3
4
1
GENTLE 30
COLD
SPORTS
WEAR
Functional clothing for
outdoor activities: sports,
alpine, workout
3
4
5
1
2
LOW
MEDIUM
HIGH
EXTRA HIGH
GENTLE
40
60
COLD
30
SILENT Cotton, linen, towels,
shirts, sheets, jeans,
mixed loads
3
4
5
1
2
MEDIUM
HIGH
EXTRA HIGH
GENTLE
LOW
40
60
COLD
30
NORMAL Cotton, linen, towels,
shirts, sheets, jeans,
mixed loads
2
3
4
5
1
MEDIUM
HIGH
EXTRA HIGH
GENTLE
LOW
40
COLD
30
SPEED
WASH
Lightly soiled clothing
and small loads
3
4
1
2
LOW
GENTLE
40
COLD
30
WOOL Laundry only with “Wool
washing” indicated
3
4
1
2
MEDIUM
GENTLE
LOW
COLD
30
40
DUVET Large items such as
blankets and comforters
1
2
3
4
5
MEDIUM
HIGH
EXTRA HIGH
GENTLE
LOW
RINSE+
SPIN
Drying after rinsing without
washing.

17
ow to use washer
H
1. POWER ON/OFF BUTTON
2. CYCLE SELECTOR KNOB
3. START/PAUSE BUTTON
5. CYCLE SETTING BUTTONS
6. DELAY WASH BUTTON
Turn his knob o selec he desired cycle. Once
he desired cycle has been selec ed, he s andard
prese s will be shown in he display. These
se ings can be adjus ed using he cycle se ing
bu ons any ime before s ar ing he cycle.
Press o urn he washer ON. Press again o urn
he washer OFF.
NOTE: Pressing he ON/OFF bu on during a
cycle will cancel ha cycle and any load se ings
will be los .
Press his bu on o START he selec ed cycle.
If he washer is running, use his bu on o
PAUSE he cycle wi hou losing he curren
se ings.
NOTE: If you do no press he START/PAUSE
bu on wi hin 4 minu es of selec ing a cycle, he
washer au oma ically urns off.
4. ADD LOAD
Use i o open he door while processing.
I is convenien ly used o add he laundry or o
remove he foreign ma erial while processing.
Press his bu on o delay he s ar of he wash
cycle. Each press of he bu on increases he
delay ime by 3 hours, up o 19 hours.
7. LED DISPLAY
The display shows he se ings, es ima ed ime
remaining, op ions, and s a us messages for
your WASHER. The display will remain on
hrough he cycle.
8. OPTION BUTTONS
The op ion bu ons allow you o selec addi ional
cycle op ions and will ligh when selec ed.
For de ailed informa ion abou he individual
op ions, please see he following pages.
Use hese bu ons o selec he desired cycle
op ions for he selec ed cycle. Press he bu on
for ha se ing un il he indica or ligh for he
desired value is li .

ow to use washer
H
18
THE LED DISPLAY
1. CYCLE COMPLETION INDICATOR
This por ion of he display shows which s age of
he wash cycle is curren ly underway (WASH,
RINSE, SPIN or DRY)
2. ESTIMATED TIME REMAINING
When he START/PAUSE bu on is pressed,
he washer au oma ically de ec s he wash load
(weigh ) and op imizes he washing ime, based
on he selec ed cycle and op ions. The display
will hen indica e he es ima ed ime remaining
for he selec ed wash cycle.
NOTE: The cycle ime displayed may appear
much longer han ha of a op-loading washer.
The displayed ime is for he comple e cycle,
ra her han jus he agi a ion por ion of he
cycle, as is ypically shown on a op-loading
washer.
3. DOOR LOCK INDICATOR
Indica es ha he door is locked. The washer
door will lock while he washer is opera ing.
The door can be unlocked by pressing he
START/PAUSE bu on o s op he washer.
NOTE: If he empera ure in he washer is oo
high, he door canno be unlocked un il he
washer has cooled. If he wa er level is oo
high, selec he SPIN cycle o drain excess
wa er. Do no ry o force open he door.
4. DELAY WASH INDICATOR
This indica or shows ha he washer has been
se for DELAY WASH. The washer will s ar
au oma ically af er he se delay ime has
passed.
The LED display shows he se ings, es ima ed ime remaining, op ions, and s a us messages for your
washer. When he washer is urned on, he display will illumina e.

19
ow to use washer
H
OPERATING THE WASHER
Once you have loaded he washer and added
laundry produc s (de ergen , bleach, and/or fabric
sof ener):
❶Press he ON/OFF bu on o urn on he
washer. The ligh s around he
cycle selec or knob will
illumina e.
❺Press he START/PAUSE bu on o begin he
cycle. The door will la ch, he
display will change, and he
washer will calcula e he
es ima ed ime remaining. Once he washer
has calcula ed he es ima ed o al cycle ime,
he washer will s ar . To pause he cycle a
any ime, press PAUSE.
NOTE: The cycle ime displayed may appear
much longer han ha of a op-loading
washer. The displayed ime is for he
comple e cycle, ra her han jus he agi a ion
por ion of he cycle, as is ypically shown on a
op-loading washer.
NOTE: If he empera ure in he washer is oo
high, he door canno be unlocked un il he
washer has cooled. If he wa er level is oo
high, selec he SPIN cycle o drain excess
wa er. Do no ry o force he door
open.Washing ime can be reduced
significan ly for small or ligh ly soiled loads by
selec ing he Speed Wash cycle and se ing
he Soil Level bu on o Ligh .
❻When he load is finished, he beeper (if se )
will sound and he door will unlock.
Remove damp clo hes from he washer
immedia ely. Check under he door seal for
small i ems.
❷Turn he cycle selec or knob o he desired
cycle. The display will show he
prese WASH, RINSE, SPIN,
TEMP. and Op ion se ings for
ha cycle.
❹Selec any addi ional cycle op ions, such as
ADD LOAD or DELAY
WASH by pressing he
bu on for ha op ion.
❸If you would like o change he se ings for
ha cycle, press he appropria e cycle
se ings bu on(s) un il he indica or ligh for
he desired se ing is li .
NOTE: To pro ec your garmen s, no every
WASH, RINSE, SPIN, TEMP. or op ion is
available wi h every cycle.
NOTE: To pro ec your garmen s, no every
WASH, RINSE, SPIN, TEMP. or op ion is
available wi h every cycle.

20
ow to use washer
H
Each cycle has prese se ings ha are selec ed
au oma ically. You may also cus omize he
se ings using he cycle se ing bu ons. Press he
bu on for ha se ing un il he indica or ligh
for he desired value is li .
The washer au oma ically adjus s he wa er level
for he ype and size of wash load for bes resul s
and maximum efficiency. I may seem here is no
wa er inside he drum in some cycles, bu his is
normal.
NOTE: To pro ec your garmen s, no every
WASH, RINSE, SPIN, TEMP. or op ion is
available wi h every cycle. See he Cycle Guide
for de ails.
Use i o selec he desired washing.
❶SOAK: For washing he dir y laundry, use his
washing af er he 60-minu e soaking.
❷PRE WASH: In case of he ex remely dir y
laundry, his wahsing removes he pollu edwa er
by washing for 10 minu es before he main
washing.
❸MAIN WASH:I is he washing ype for he
general one.
❹SMALL QUANTITY:Use i for he small laundry.
❺TIME SAVE: Use i for he shor - ime wahsing.
WASH
Use i o change he number of
rinsings
RINSE
Selec s he wash empera ure
combina ion for he selec ed cycle.
Press he TEMP. bu on un il he
indica or ligh for he desired se ing is
li .
• Your washer fea ures a hea ing elemen o boos
he ho wa er empera ure for Ex ra Ho se ings.
This provides improved wash performance a
normal wa er hea er se ings.
• Selec he wa er empera ure sui able for he ype
of load you are washing. Follow he fabric care
label for bes resul s.
To ac iva e he DRAIN & SPIN cycle:
❶Press he ON/OFF bu on o urn on he
washer.
TEMP.
❷Press he SPIN bu on.
❹Press he START/PAUSE bu on.
❸Selec he desired spin speed.
NOTE: If NO SPIN is selec ed, he washer will
drain only.
The washer drum spins a up o
1,200 RPM. This reduces drying ime
and saves energy. Press he SPIN
bu on un il he indica or ligh for he
desired se ing is li . Some fabrics, such as
delica es, require a slower spin speed.
The Drain & Spin cycle:The Spin bu on also
ac iva es he Drain & Spin cycle o drain he ub
and spin clo hes; for example, if you wan o
remove clo hes before he cycle has ended.
SPIN
CYCLE SETTING BUTTONS