Life Gear 76260 User manual

LifeGear L1/BARBELL RACK
ITEM NO.: 76260
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change without notice.
2010, Dec.

1
TABLE OF CONTENTS
WARRANTY--------------------------------------------------------------------------------- 1
SAFETY INSTRUCTIONS-------------------------------------------------------------- 2
MAINTENANCE--------------------------------------------------------------------------- 2
PARTS LIST-------------------------------------------------------------------------------- 2
HARDWARE PACKING LIST---------------------------------------------------------- 3
TOOLS--------------------------------------------------------------------------------------- 3
OVERVIEW DRAWING------------------------------------------------------------------ 4
ASSEMBLY INSTRUCTIONS---------------------------------------------------------- 5
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing, free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is extended only to the original owner and is not transferable.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase

2
SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using this barbell rack: Read all instructions before using this
barbell rack.
1. Please make sure all parts are not damaged and fixed well before use. This barbell
rack should be placed on a flat surface.
2. Do not attempt any maintenance or adjustments other than those described in this
manual.
3. Do not place this barbell rack outdoors.
4. This barbell rack is for household use only.
5. Keep children and pets away from barbell rack.
MAINTENANCE
Please wipe dust off the barbell rack with a clean, dry cloth.
Please inspect all assembly bolts and nuts on the barbell rack for proper tightness and frame
of the barbell rack for any sign of cracking or permanent bending. If you find this situation,
do not use this barbell rack.
PARTS LIST
No. Description Qty No. Description Qty
001 Base Tube 2 010 Hex Bolt M10x50 24
002 Connector Frame 2 011 Hex Bolt M6x40 8
003 Barbell Frame 4 012 Washer Ø6 16
004 Top Tube 2 013 Washer Ø10 88
005 Flat Plate 2 014 Nylon Lock Nut M10 44
006 Safety Plate 24 015 Nylon Lock Nut M6 8
007 Hex Bolt M10x70 8 016 Top Tube End Cap 30x30 4
008 Hex Bolt M10x75 8 017 Base Tube End Cap 50x50 4
009 Hex Bolt M10x85 4

3
HARDWARE PACKING LIST
TOOLS
(7) Hex Bolt M10x70
8 PCS
(9) Hex Bolt M10x85
4 PCS
(8) Hex Bolt M10x75
8 PCS
(11) Hex Bolt M6x40
8 PCS
(14) Nylon Lock Nut M10
20 PCS
(13) Washer Ø10
40 PCS
(12) Washer Ø6
16 PCS
(15) Nylon Lock Nut M6
8 PCS
Wrench 14-10
2 PCS
Wrench 14-17
2 PCS

4
OVERVIEW DRAWING

5
ASSEMBLY INSTRUCTIONS
Step 1
Attach both Base Tubes (1) onto Connector Frames (2) with eight M10x70 Hex Bolts (7),
eight M10 Nylon Lock Nuts (14), and sixteen Ø10 Washers (13). Tighten bolts and nuts
with two Wrenches provided.
Attach four Barbell Frames (3) onto both Base Tubes (1) with eight M10x75 Hex Bolts (8),
eight M10 Nylon Lock Nuts (14), and sixteen Ø10 Washers (13). Tighten bolts and nuts
with two Wrenches provided.
Attach two Flat Plates (5) onto four Barbell Frames (3) with eight M6x40 Hex Bolts (11),
eight M6 Nylon Lock Nuts (15), and sixteen Ø6 Washers (12). Tighten bolts and nuts with
two Wrenches provided.
Hardware:
8 Hex Bolts (M10x70) 32 Washers (Ø10) 16 Nylon Lock Nuts
(M10)
8 Hex Bolts (M10x75)
8 Hex Bolts (M6x40) 16 Washers (Ø6) 8 Nylon Lock Nuts (M6)
2 Wrenches 14-17
Tool:

6
Step 2
Attach both Top Tubes (4) onto top ends of the Barbell Frames (3) with four M10x85 Hex
Bolts (9), four M10 Nylon Lock Nuts (14), and eight Ø10 Washers (13). Tighten bolts and
nuts with two Wrenches provided.
Hardware:
4 Hex Bolts (M10x85) 8 Washers (Ø10) 4 Nylon Lock Nuts (M10)
2 Wrenches 14-10
Tool: