Life Smart LS-Stealth-6FP User manual

Lifesmart Infrared Heater
User’s Manual
Model#:LS-Stealth-6FP
FOR INDOOR USE ONLY
120VAC 15 AMP DEDICATED CIRCUIT
The LIFESMART Infrared Heater works with your in‐home furnace to provide
supplement heat. Carefully and thoroughly read this manual before using the
LIFESMART Infrared Heater for the first time. We recommend keeping this manual
for regular review and future reference. This heater is intended for residential use.

Introduction
LIFESMART Infrared Heaters utilize the latest infrared heat technology. LIFESMART Infrared Heaters
provide a safe, convenient, clean, and economical way to distribute heat throughout your home or
business without producing deadly fumes or monoxide gases. Our heating system produces therapeutic
infrared heat that can potentially relieve symptoms of cardiovascular conditions and inflammatory
diseases. Infrared heat technology, in general, produces rays that are safe and highly beneficial to our
bodies and health professionals have been using infrared technology for decades to treat muscle and
joint pains.
LIFESMART Infrared Heaters are constructed of a wood housing. They are equipped with nylon caster
wheels for easy mobility. And the highly efficient filter can be maintained and cleaned by simply rinsing
with warm water.
Safety
USE CAUTION
Save these instructions because electrical safety is essential to keeping your home safe. When using an
electrical appliance, basic precautions should always be followed to reduce the risk of fire, electric shock,
and injury to persons. Please adhere to the following safety instructions:
The heater must be operated by an adult. Keep heater out of the reach of children.
Only operate the heater when it is on the floor.
Do not operate heater near any water.
Do not plug heater into any other cord connected device such as power strip, surge protector,
multiple outlet adapter, grounding adapter, outlet-type air fresheners or extension cords. Plug the
heater cord directly into a 3-prong 120V 15 amp grounded circuit receptacle.
Never plug heater cord into a loose fitting or broken receptacle.
Never alter the heater’s design or operation. Such actions will void warranty and could result in
injury and/or death.
Do not operate the heater if it has a damaged cord or plug.
Do not operate the heater if there are signs of malfunction. If the heater has been dropped or
damaged, do not operate.
Keep combustible materials such as furniture, pillows and other bedding materials, paper(s),
clothing, and curtains at least three feet away from all sides of the heater during operation.
Always unplug heater when not in use.
Do not use the heater outdoors.
Do not run heater cord under carpet. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Route cord away from traffic areas.
Do not use the heater in bathrooms, laundry rooms, or similar indoor locations.
Turn off heater before unplugging.
Do not insert any foreign object or allow foreign object to enter the ventilation opening or
exhaust opening as this may cause electric shock, fire, and/or injury.
Never block the air intake or exhaust opening in any manner as this could lead to fire.
Do not locate heater, when in use, immediately below a receptacle.
IMPORTANT INSTRUCTIONS

Never operate heater in or around a bathtub, shower, or swimming pool.
Only open heater if instructed by an authorized representative of the manufacturer. There are
limited user-serviceable parts inside.
Use heater only as described in this manual. Any other use is not recommended by the
manufacturer as it may lead to fire, electric shock, and/or series physical injury or death.
Heater Specifications
LIFESMART Heater Model# LS-Stealth-6FP
Carton Size: 23.2in x 17.4 in x 21.7 in Thermostat: Electronic Analog
Heater Size: 20.9in L x 15in W x 18.3in H Fan System: Cross Flow Fan
Net Weight: 45.5 lbs Fan Noise Level: 46 db
Gross Weight: 49.5 lbs BTU: 5600
Cabinet: ¾ ply –Dark Oak Delayed Start Function
Power Cord: 5.8 ft / 16 gauge Remote Control
Heat Chamber with Diathermanous Copper Plate “HI” Function: 1500 watts
Heating Elements: 6 Infrared Quartz Bulbs w/ Nickel-Chrome Filament “LOW” Function: 1000 watts
Power Requirement: 120V 15 amp Washable Filter
Heating Elements Life Expectancy Potential: Rated 20,000 hrs Warranty: Limited 5-Year Parts Only
Heat Type: Therapeutic Quartz Infrared Heat
How It Works
The LIFESMART Infrared Heater works with your in-home furnace to provide supplement heat. In short,
room temperature air circulates from the rear of the LIFESMART Infrared Heater, passes through a
highly efficient filter, enters a chamber that houses the Infrared Quartz Bulbs, and exits as heated air
from the Diathermanous Copper Plate constructed on the front of the unit. The LIFESMART Infrared
Heater ideally heats a room of approximately 1000 unobstructed square feet, but can be used to heat up
a single room size up to 1800 square feet, depending on the ambient temperature. And it does all this
with a noise level below 46db. The LIFESMART Infrared Heater is not for use as the primary/sole
heating system.
Components and Functions
A. The LIFESMART Infrared Heater is constructed with Infrared Quartz Bulbs. Each Infrared Quartz
Bulb is rated at 250W. These bulbs produce therapeutic infrared rays that warm the air which
passes through the inner chamber. The Infrared Quartz Bulbs are constructed with a thermal
conducting housing. The incorporated twisted style on each bulb increases the efficiency of the
unit.
B. An AC Cross Flow Fan pushes air over these Infrared Quartz Bulbs. Cross Flow Fans create a
wide flow of air using a cylindrical-shaped impeller. Air is drawn inside the LIFESMART Infrared
Heater, flows along the circumference of the chamber and over the Infrared Quartz Bulbs, and is
blown out laterally creating a uniform flow of warm air.

C. The LIFESMART Infrared Heater has a Delay Start Function which controls the AC Cross Flow
Fan. The purpose of the Delay Start Function is to allow the Infrared Quartz Bulbs to heat up
before the fan begins to circulate the air flow. In addition, the AC Cross Flow Fan will continue to
circulate the airflow after the power is turned off to circulate the warm air from the LIFESMART
Infrared Heater cooling the unit down.
D. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature
and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it
simplifies and makes controlling the unit easy. Operating the heater is logical and can be done
on the unit itself or by remote.
E. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature
and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it
simplifies and makes controlling the unit easy. Operating the heater is logical and can be done
on the unit itself or by remote.
F. The sleek, yet beautiful fireplace display is an added visual bonus with adjustable lighting that
adds ambience to any occasion.
Unpacking the LIFESMART Infrared Heater
1. First, check the carton to make sure there are no obvious damages that may have occurred
during shipment.
2. Open the LIFESMART Infrared Heater packaging and remove the heater by sliding it from the box.
You may want to gently and cautiously turn the entire box upside down letting the heater slowly
slide out.
3. Remove all the protective materials from the heater. It may be a good idea to keep the protective
materials and packaging for storage during the off-season.
Operating Instructions
Visually inspect the LIFESMART Infrared Heater for any damages before operation. Do not
operate the heater if any damages are detected. Contact your dealer immediately.
NOTE: “UP”and “DOWN”arrow buttons on the control panel and remote control have
dual function capabilities.
Adjust TIME / TEMP with up arrow or adjust HI / LOW settings.
Adjust TIME / TEMP with down arrow or adjust 0C/0F settings.

1) Plug the power cord directly into a conventional 120V 15 amp outlet and press the MASTER
POWER switch on the rear of the portable heater. Then press the POWER button on the front
control panel or on the remote to start the unit. The LED display will show the default value as
720F/220C.
(Note: If the ambient temperature (the temperature in the area around the heater) is greater than the set
temperature, the HI/LOW display, fan, and Quartz Bulbs will not operate.)
2) By pressing the 0C/0F/Down button, you can switch the temperature format from Fahrenheit to
Celsius and vice versa.
3) By pressing the TIME button, the LED display will switch from the temperature status to the TIME
status and begin to flash. The default time will display “--“. This means that the TIME is not
activated and, therefore, the heater will remain on. You must press the HI/LOW/UP button or the
0C/0F/DOWN once again within (5) seconds to set the time. Each time you press the HI/LOW/UP
button, the time will increase by 0.5 Hr. If you press the 0C/0F/DOWN button, the time will
decrease by 0.5 Hr. The maximum value for time is 8.0 Hr. By holding down the HI/LOW/UP
button or 0C/0F/DOWN for (2) seconds, the number rotation will cycle quicker. If you do not press
the HI/LOW/UP button or 0C/0F/DOWN within (5) seconds, the time status will switch back to the
temperature status.
Function Display
Press TIME to switch
to time status, then
press HI/LOW/UP
button once within 5
seconds to scroll up
Press the 0C/0F/Down to
switch from Fahrenheit
to Celsius.

4) Again, the default set temperature displayed on the LED display is 720F. By pressing the TEMP
button, the LED display will switch to the temperature status and flash. You must press the
HI/LOW/UP button or 0C/0F/DOWN button once again within (5) seconds to set the desired
temperature. Each time you press the HI/LOW/UP button, the temperature setting will increase
by 10F. Press the 0C/0F/DOWN button and the time will decrease by 10F. The maximum
temperature setting is 860F (300F). If you hold the HI/LOW/UP button or 0C/0F/DOWN button for
(2) seconds, the number rotation will cycle quicker.
5) Press the HI/LOW/UP button to switch from HI (rated at 1500W) to LOW (rated at 1000W). The
default setting is HI.
6) Easily manipulate the flame effect brightness by turning the FLAME knob clockwise for a brighter
effect or counterclockwise to or shut off the flame effect completely.
5 seconds later the
value switches to
ambient temperature
Press TEMP to switch
to temperature status,
then press HI/LOW/UP
button once within 5
seconds to scroll up
From HI to LOW

7) The LIFESMART Infrared Heater can be turned off by pressing the POWER button. DO NOT
TURN OFF THE MASTER POWER SWITCH ON THE REAR OF THE HEATER OR UNPLUG
THE HEATER UNTIL THE FAN SHUTS DOWN. If the heater is left on using the TIME function,
there will be (5) second sound alert to let you know that the time is expiring. If no actions are
taken, the heater will shut off.
8) Note that the temperature displayed on the heater may not always match the temperature
displayed on wall thermostats, thermometers, or other external temperature read-outs. This is
because the heater is often located near the floor, which allows for it to register the temperature
of the cooler air near and around the floor (warmer air rises up). It does not necessarily mean
your room is cooler or that the heater is not heating. If your heater’s display and your external
temperature read-out mechanism (thermometer, wall thermostat, etc.) are within a 5 to 6 degree
difference, it is completely normal.
Recommendations for Maximum Performance
1. Be sure not to place the heater in an area where there is too much cross air flow.
2. Direct the heater’s vent towards the center of the room and not towards a solid structure, like a
wall for example. For larger areas, place the heater in a centralized location.
3. The LIFESMART Infrared Heater is designed for maximum efficiency in the 680 F to 740F range.
4. Existing HVAC heating system vents should be closed. This allows the heater to function in an
isolated area.
5. It is not recommended to operate the heater in areas with non-insulated concrete or in structures
with metal walls.
6. If absolutely necessary to use on concrete floors, the floors should be covered to maintain the
heat within the room.
7. If the heater filters become dirty or dusty, they must be cleaned for the heater to operate at its
maximum efficiently.

Care, Maintenance, and Storage
Before care or maintenance is applied, always unplug the cord from the receptacle. The cabinet housing
can be wiped down with a slightly wet cloth or with non-corrosive, mild, furniture polish. The heater has a
washable filter. The filter should be cleaned or rinsed regularly to provide maximum performance. Once
the filter is removed, run warm water through and over the filter (a mild soap can be applied to assist in
removing dirt and dust). Dry the filter completely before re-installing into the heater.
If the heater is not to be used for an extended period of time, it can be stored away. Make sure the
power is turned off and the cord is unplugged from the receptacle. Wrap the cord around the handle on
the rear of the portable heater. Cover the heater to prevent dust from accumulating on the heater. You
may want to repack it back in its original carton. Always store the heater in a dry and dust free
environment.
(Note: You may want to clean the filter prior to storing the heater away so that it is ready for operation the
next time it is used.)
Troubleshooting
1. PROBLEM:
a. If the Heat Emitter is broken or damaged
b. If the Control Panel is not responding, the temperature reading is above 860F/300C, or there is a burning
odor coming from the portable heater
c. Or if the power cord is damaged
SOLUTION: Contact the manufacture immediately. DO NOT attempt to operate the portable heater as this may
cause electric shock, fire, and/or injury.
2. PROBLEM:
a. The amount of heated air exiting the front of the portable heater is reduced.
SOLUTION: Check the electrostatic filter to make sure it is free of dust and dirt. Also
check the front grill and rear air intake to make sure it is not being blocked by any kind of debris.
3. PROBLEM:
a. The heater will not turn on.
SOLUTION: First, test your outlet to make sure it has power. You can do this by plugging in another appliance
and turning the appliance on. Second, check the LED display to see if it is flashing. If this is the case, press
the POWER button to turn off the TIME and resume normal operation of the portable heater. Third, check the
power switch to see if it is lighting up. If the outlet does have power, the LED display is not flashing, or the
power switch is not lighting up, contact the manufacturer immediately for further troubleshooting.
4. PROBLEM:
a. The portable heater continues to operate even when the power switch is turned off.
SOLUTION: Do not unplug. The portable heater has a fan that will continue to operate even when the power
switch is turned off. This fan continues to run in order to cool down the portable heater. Once the fan stops
running, you can then unplug the portable heater.

5. PROBLEM:
a. The control panel displays no temperature or TIME.
SOLUTION: First, check to make sure the power cord is not damaged, is plugged in, and the outlet has power.
Second, check to make sure the control panel is not damaged. If the control panel display continues to be
inoperable, contact the manufacturer for further troubleshooting.
6. PROBLEM:
a. The control panel is displaying a temperature and TIME, but the heater does not operate.
SOLUTION: The Signal Cable or other relevant plugs may have become disconnected. Please contact the
manufacture for further troubleshooting.
7. PROBLEM:
a. The heat emitter is functioning and the air outflow is working, but the temperature displayed on the LED
panel does not increase.
SOLUTION: The temperature sensor may be damaged or has become disconnected. Please contact the
manufacturer immediately for further troubleshooting.
8. PROBLEM:
a. The display shows “Er”. This error code means the heating system is not working correctly.
SOLUTION: Contact the manufacturer immediately. DO NOT attempt to operate the portable heater as this may
cause electric shock, fire, and/or injury.
9. PROBLEM:
a. No simulated flame when you turn on the switch.
SOLUTION: Contact the manufacturer to rive the special screw at the base of the heater, then replace the bulb
with the working life of G9 halogen bulb.

Limited Manufacturer Warranty
5 Year Limited Parts Warranty: LIFESMART warrants this heater against defects in materials and
workmanship on functional parts, for a period of 5 years from the original date of purchase. Your sales
receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place
for future reference.
Manufacturer Warranty
All LIFESMART products are manufactured with the highest quality materials and are warranted to be
free from defects in material and workmanship at the time of purchase. This limited warranty applies to
products manufactured or distributed by the LIFESMART brand name, are delivered in the continental
United States, and extends to the original purchaser, or gift recipient. This warranty becomes valid at the
time of purchase and terminates either by the specified time frame listed above and/or owner transfer
(unless otherwise authorized by LIFESMART, as the manufacturer). Any extended warranties (warranties
that cover above and beyond this manufacturer warranty) that are sold through a retailer or third party, are
not directly correlated with this LIFESMART limited warranty, and may be redirected to said retailer or
third party for coverage.
Extent of Warranty
This warranty extends through the manufacturer of the product, and covers functional parts only.
Cosmetics are not covered, unless unequivocally determined it is a manufacturer/workmanship defect. Note
that surface cracks are not considered defects in material or workmanship, as they are normal characteristics
of all wood. Unless LIFESMART was the direct shipper, shipping damage should be addressed with the
shipping company, retailer, or place of purchase, prior to making a claim to LIFESMART, as the
manufacturer.
The manufacturer's sole obligation under this warranty shall be limited to furnishing the original purchaser
replacement parts for units deemed repairable by the LIFESMART warranty department. The purchaser
may also opt to ship the product to LIFESMART to have it repaired. The purchaser will be responsible to
prepay any shipping charges (both ways), export taxes, custom duties and taxes, or any other charges
associated with the transportation of the unit. In addition, the purchaser is responsible for insuring any parts
shipped or returned, if desired. For products the warranty department deems un-repairable, or discontinued,
LIFESMART reserves the right to issue a refurbished product, or product similar in size and functionality
as a replacement for the defective unit, if available. All exchanged parts and products replaced under this
warranty will become the property of LIFESMART.LIFESMART reserves the right to change
manufacturers of replacement parts or products for use, in order to cover any existing warranty. Any parts
determined defective may asked to be returned to LIFESMART or its representatives to validate a claim.
Any non-warranty/purchased replacement parts will be warranted for 30 days from the time the purchaser
receives them.
The purchaser must present LIFESMART with proof of purchase documents (including the date of
purchase) if requested. Any evidence of alteration, erasing, or forgery of proof of purchase documents will
be just cause to VOID this limited warranty. Products, in which the serial number has been defaced or
removed, are not eligible for warranty coverage.