The ELLIPTICAL CROSS TRAINER is designed
for Home Use ONLY & should not be used in a
commercial environment.
The official maximum load is 180kg, but the
ELLIPTICAL CROSS TRAINER has been tested
far beyond that limit.
The ELLIPTICAL CROSS TRAINER has been
tested and certified according to the European
Norm Standard EN 957 Part 1 & 9, Class H.A.
The braking system is Speed Independent.
the unlikely event that your ELLIPTICAL
CROSS TRAINER needs servicing, repairs or
something is missing or broken then contact your
local dealer as soon as possible. They should be
able to help you immediately with any and all
problems you have. If for any reason that you are
unsatisfied with the level of service or are
unhappy with their cooperation, then you can
contact the manufacture directly at the following
contact details.
LIFE CORE FITNESS
242 Bingham Rd. #101
San Marcos, CA 92069
TEL: (760) 471-7442
FAX: (760) 471-1324
It is important to keep your Purchase Receipt !, As you
may be asked to produce it too authenticate your
Warranty.
The Warranty terms are provided by your dealer.
It is also important to state which Model you have, the
ELLIPTICAL CROSS TRAINER Model Number is
LC985VG.
Please continue to read the Owner's Manual and
all safety instructions thoroughly to familiarize
yourself with the ELLIPTICAL CROSS TRAINER
before using it.
In
Read t his Owner's Manua l and all sa fety
instructions thoroughly and familiarize yourself
with the ELLIPTICAL CROSS TRAINER before
using it.
Before beginning any exercise program,
consult your physician. He or she can help
evaluate your present fitness level and
determine the exercise program that is the
most appropriate for your age and physical
condition.
If you experience any pain or tightness in
your chest, irregular heartbeat, shortness of
breath, faintness, or unusual discomfort
u po n e x er c isi n g, s to p a n d c ons ult a
physician before continuing.
Adult supervision is required at all times
w h e n c h i l d r e n a r e o n o r n e a r t h e
E L L I P T I C A L C R O S S T R A I N E R .
Unsupervised children should keep away
from the equipment at all times.
Keep fingers and limbs, loose clothing and
hair away from moving parts.
Before each workout on your ELLIPTICAL
C R O S S T R A I N E R w e a d v i s e t h a t a
Precautionary Safety Check is wise. All
equipment should be Safety Checked for
wear & damage.
R e p l a c e d e f e c t i v e
components immediately and/or keep the
equipment out of use until repaired. For
repair help - see General Information on this
page.
Care should be taken when getting ON or
OFF your ELLIPTICAL CROSS TRAINER.
Please follow the instructions on page 8.
U se o nly t he a cce s s or y att a c hm e n ts
recommended by the manufacturer.
If you find any damage or
defective com ponents STO P us ing the
E L L I P T I C A L C R O S S T R A I N E R
I M M E D I A T E L Y.
IMPORTANT INFORMATION - PLEASE READ Failure to read and follow the safety instructions below may result in serious injury or even death.
2
Medical / Safety
1.
Care and Maintenance General Information
Your ELLIPTICAL CROSS TRAINER is made of
the highest quality materials, it is still important
that you take care of your ELLIPTICAL CROSS
TRAINER on a regular basis.
Your ELLIPTICAL CROSS TRAINER is for indoor
use only and should NOT be used or stored in
damp areas. Wipe all perspiration from your
ELLIPTICAL CROSS TRAINER after each use.
Dual Action Handle Bar
These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Nut & Bolts are tight and firm.
Stationary Handle Bar
These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Bolts are tight and firm.
Foot Pedals
These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Knobs are tight and firm.
Stabilizers
These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Bolts are tight and firm.
The 3x Pivot Points
A l l P i v o t P o i n t s a r e a s p e c i a l d e s i g n ,
incorporating a space age plastic with lubricate
built inside. The Pivot Points are also pre-
greased by the Manufacturer & will last a lifetime
under normal use.
If you wish to grease the 3x Pivot Points, use a
good quality grease that is friendly to plastic
(some greases destroys plastic). Disconnect the
Foot Pedal Tube and the Dual Action Arms
Grease the moving parts & reassemble.
All Fasteners [Nuts, Bolts, Screws and Clips]
Regularly check tightness of Nuts, Bolts, Screws
and Clips etc.
For SAFETY inspect your ELLIPTICAL CROSS
TRAINER on a regular basis, we suggest every
2~3 weeks.
SP EC IAL AT TENTION T O COMP ON ENTS
MOST SUSCEPTIBLE TO WEAR
See ELLIPTICAL CROSS TRAINER ASSEMBLY INSTRUCTIONS for Parts List and Exploded Drawing.
2.
3.
4.
5.
6.
7.
