Light Emitting Designs ILX450 Series User manual

FEATURES AND APPLICATIONS
• L70 Rating @ Ta 25°C Over 160 ,000 hour rated life
• Low / Mid / High Bay applications
• Available in Type II, V Round, V Square
• 10-Year Limited Warranty
• IP68 (Water / Dust / Vapor Proof) rated fixture
• Indoor / outdoor applications
• Low profile industrial grade design
• Easy to install with versatile mounting system
• Food Processing Plants
• Manufacturing Plants
• Warehouses
• Parking Structures
• Canopy Lighting
• Sports Arenas
• Airplane Hangars
• Refineries & Petrochemical Plants
ITEMS INCLUDED FOR INSTALLATION
Made in Taiwan
Designed and Engineered in the USA
• One ILX450 LED Industrial Light with SST pre-mount
• One (SST) Spring Loaded Snap & Turn Surface Mounting Bracket
• Four sets of anchoring kit for concrete surfaces
• One standard wire fitting for junction-box knockout hole
• Installation manual
INSTALLATION GUIDE
ILX450 Series
LED Industrial Lighting
SST - Spring Loaded Snap & Turn Surface Mounting
01

Made in Taiwan
Designed and Engineered in the USA
INSTALLATION GUIDE
18¼"
Ø465mm
External Dimensions
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician
and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit
breaker or fuse box before installing, servicing or
inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input
connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the
temperatures could exceed 65°C (149°F)
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Packaging Information
114mm
4½"
163mm
6⅜"
SST - Spring Loaded Snap & Turn Surface Mounting
Case Quantity Dimensions (LxWxH) Weight
12.5 kg
27.5 Ibs
150 x 50 x 23 cm
19.7 x 19.7 x 9 in
02
ILX450 Series
LED Industrial Lighting

1.
2.
Made in Taiwan
Designed and Engineered in the USA
• Handle fixture with care while unpacking
the unit from its packaging and carefully
examine the unit for defects before
installing. Report any damage and save
all packing materials if any part is
damaged during transport. We
recommend wearing work gloves when
installing this fixture to prevent dirt and oil
from coming into contact with the fixture.
• Use the SST mounting bracket as a
template to mark the screw holes location
onto the intended surface.
INSTALLATION GUIDE SST - Spring Loaded Snap & Turn Surface Mounting
03
ILX450 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
3.
4.
• For concrete surfaces use a Ø5/16"
(8.0mm) drill bit and drill holes 1-1/4"
(30mm) deep at the marked locations.
(Make sure that all dimensions are precise)
• Hammer all four concrete anchors into the
four drilled holes until they are flush with
the surface.
• Tighten all four hexagon spacers firmly
into the concrete anchors.
• For wooden surfaces use a Ø1/8"
(5.0mm) drill bit and drill holes 1-1/4"
(30mm) deep at the marked locations.
• Tighten all four hexagon spacers firmly
into the drilled holes.
• Align and tighten the SST (Spring
Loaded Snap and Turn Surface Mounting
Bracket) onto the hexagon spacers using
the hexagon nuts and washers provided
in the kit.
Concrete Wood
INSTALLATION GUIDE SST - Spring Loaded Snap & Turn Surface Mounting
04
ILX450 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
5.
• Align the 4 spring loaded bolts located on top of the fixture with the 4 larger holes along the
semicircular slotted holes.
• Push the fixture firmly upwards until the springs are compressed and the bolt heads have gone
through the slotted holes of the SST mounting bracket. Then turn the complete fixture clockwise
until the bolt heads have fallen into the recessed groove of the mounting bracket.
• Make sure that the fixture cannot be turned counter clockwise and is firmly in place.
• Insert the fixture input AC cable wire through the center hole of the SST mounting bracket and
pass it through the side exiting hole of the mounting bracket.
I
II
INSTALLATION GUIDE SST - Spring Loaded Snap & Turn Surface Mounting
05
ILX450 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
6.
• Before connecting any AC input electrical wiring to the electric grid make sure to turn OFF power to all
appropriate circuit at the breaker box.
• Carefully unscrew and remove the junction-box cover.
• Insert AC line input wires through the knock out hole. Install proper electrical fittings at the knockout
hole for wire protection, provided with the installation kit. Nominal strip length with 5/8" (15 mm) long.
• Connect the AC input line (L) wire to the corresponding marked AC line (L-BLACK) wire with a wire
nut. Connect the AC input neutral (N) wire to the corresponding marked AC neutral (N-WHITE) wire
with a wire nut. Ground fixture by connecting the input ground wire ( ) to the corresponding marked
ground wire ( - GREEN) on the quick connect terminal block.
• Firmly tighten junction-box cover before testing the fixture.
Warning!
INSTALLATION GUIDE SST - Spring Loaded Snap & Turn Surface Mounting
06
ILX450 Series
LED Industrial Lighting

INSTALLATION GUIDE SST - Spring Loaded Snap & Turn Surface Mounting
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit breaker or fuse box before installing, servicing
or inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified product wattage.
• Use UL and / or CE approved wires for all input connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the temperatures could exceed 65°C (149°F)
NOTE
• While the fixture is ON, do not cover the front surface of the
light fixture or place it on any flat surfaces that would cover
the front air ventilation holes for more than 30 minutes.
This will prevent the fixture from properly cooling via air
convection and can cause the fixture to overheat & fail.
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Dimming
Dim – (Brown)
NOTE: • Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input connections,
minimum size required 18 AWG (0.82mm²)
• Refer to the specific dimmer installation manual for exact
wiring instructions.
N – (White)
L – (Black)
Ground (Green)
Dim + (Blue)
AC Input
Wiring Information
www.lightemittingdesigns.com
2140 N. Hollywood Way #6486 Burbank, CA 91510 USA
tel: 1-855-4LEDPRO, e-mail: [email protected]
07
ILX450-SST IG REV01012022
ILX450 Series
LED Industrial Lighting