Light Emitting Designs ILX3525 Series User manual

FEATURES AND APPLICATIONS
• L70 Rating @ Ta 25°C Over 150,000 hour rated life
• Low - Mid Bay applications
• Available in Type II, V Square
• 10-Year Limited Warranty
• IP68 - waterproof rated fixture
• Indoor / outdoor applications
• Low profile industrial grade design
• Easy to install with versatile mounting system
• Food Processing Plants
• Billboards
• Warehouses
• Parking Structures
• Canopy Lighting
• Tunnels
• Mining
• Refineries & Petrochemical Plants
ITEMS INCLUDED FOR INSTALLATION
Made in Taiwan
Designed and Engineered in the USA
• One ILX3525 LED Industrial Light with SSL pre-mount
• One (SSL) Spring Loaded Snap & Slide Surface Mounting Bracket
• Four sets of anchoring kit for concrete surfaces
• One standard wire fitting for junction-box knockout hole
• Installation manual
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Surface Mounting
R HS
o
compliant
IP68
01
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
External Dimensions
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician
and / or qualified personnel.
• Make sure to Slide OFF the main power from the circuit
breaker or fuse box before installing, servicing or
inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and/or CE approved wires for all input connections,
minimum size required 18 AWG(0.82mm²)
• Do not use this product in environments where the
temperatures could exceed 60°C (140°F)
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Packaging Information
Case Quantity Dimensions (LxWxH) Weight
138.5 x 28.5 x 16.5 cm
15⅛ x 11¼ x 6½ in
5.7 kg
12.5 Ibs
INSTALLATION GUIDE
83mm
3¼"
117mm
4⅝"
13¾"
350mm
9⅞"
250mm
SSL - Spring Loaded Snap & Slide Surface Mounting
R HS
o
compliant
IP68
02
ILX3525 Series
LED Industrial Lighting

R HS
o
compliant
IP68
1.
2.
Made in Taiwan
Designed and Engineered in the USA
• Handle fixture with care while unpacking
the unit from its packaging and carefully
examine the unit for defects before
installing. Report any damage and save
all packing materials if any part is
damaged during transport. We
recommend wearing work gloves when
installing this fixture to prevent dirt and oil
from coming into contact with the fixture.
• Use the SSL mounting bracket as a
template to mark the screw holes location
onto the intended surface.
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Surface Mounting
03
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
3.
4.
• For concrete surfaces use a Ø5/16"
(8.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
(Make sure that all dimensions are precise)
• Hammer all four concrete anchors into the
four drilled holes until they are flush with
the surface.
• Tighten all four hexagon spacers firmly
into the concrete anchors.
• For wooden surfaces use a Ø1/8"
(5.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
• Tighten all four hexagon spacers firmly
into the drilled holes.
• Align and tighten the SSL (Spring
Loaded Snap and Slide Surface Mounting
Bracket) onto the hexagon spacers using
the hexagon nuts and washers provided
in the kit.
Concrete Wood
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Surface Mounting
04
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
5.
• Align the 4 spring loaded bolts located on top of the fixture with the 4 larger holes along the
semicircular slotted holes.
• Push the fixture firmly upwards until the springs are compressed and the bolt heads have gone
through the slotted holes of the SSL mounting bracket. Then Slide the complete fixture until the bolt
heads have fallen into the recessed groove of the mounting bracket.
• Check to make sure that the fixture is firmly in place.
• Insert the fixture input AC cable wire through the center hole of the SSL mounting bracket and
pass it through the side exiting hole of the mounting bracket.
I
II
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Surface Mounting
05
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
6.
• Before connecting any AC input electrical wiring to the electric grid make sure to Slide OFF power to
all appropriate circuit at the breaker box.
• Carefully unscrew and remove the junction-box cover.
• Insert AC line input wires through the knock out hole. Install proper electrical fittings at the knockout
hole for wire protection, provided with the installation kit. Nominal strip length with 5/8" (15 mm) long.
• Connect the AC input line (L) wire to the corresponding marked AC line (L-BLACK) wire with a wire
nut. Connect the AC input neutral (N) wire to the corresponding marked AC neutral (N-WHITE) wire
with a wire nut. Ground fixture by connecting the input ground wire ( ) to the corresponding marked
ground wire ( - GREEN) on the quick connect terminal block.
• Firmly tighten junction-box cover before testing the fixture.
Warning!
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Surface Mounting
06
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Surface Mounting
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit breaker or fuse box before installing, servicing
or inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified product wattage.
• Use UL and / or CE approved wires for all input connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the temperatures could exceed 60°C (140°F)
NOTE
• While the fixture is ON, do not cover the front surface of the
light fixture or place it on any flat surfaces that would cover
the front air ventilation holes for more than 30 minutes.
This will prevent the fixture from properly cooling via air
convection and can cause the fixture to overheat & fail.
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Dimming
Dim – (Brown)
NOTE: • Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input connections,
minimum size required 18 AWG (0.82mm²)
• Refer to the specific dimmer installation manual for exact
wiring instructions.
N– (White)
L– (Black)
Ground (Green)
Dim + (Blue)
AC Input
Wiring Information
07
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Hanging System
FEATURES AND APPLICATIONS
• L70 Rating @ Ta 25°C Over 150,000 hour rated life
• Low - Mid Bay applications
• Available in Type II, V Square
• 10-Year Limited Warranty
• IP68 - waterproof rated fixture
• Indoor / outdoor applications
• Low profile industrial grade design
• Easy to install with versatile mounting system
• Food Processing Plants
• Billboards
• Warehouses
• Parking Structures
• Canopy Lighting
• Tunnels
• Mining
• Refineries & Petrochemical Plants
ITEMS INCLUDED FOR INSTALLATION
• One ILX3525 LED Industrial Light with SSL pre-mount
• One (SSL) Spring Loaded Snap & Slide Pipe Hanging Bracket
• Four sets of anchoring kit for concrete surfaces
• One standard wire fitting for junction-box knockout hole
• Installation manual
01
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE
SSL - Spring Loaded Snap & Slide Hanging System
External Dimensions
SSL-ILX3525-H45B SSL-ILX3525-H90B
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician
and / or qualified personnel.
• Make sure to Slide OFF the main power from the circuit
breaker or fuse box before installing, servicing or
inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Packaging Information
Case Quantity Dimensions (LxWxH) Weight
1
900mm
36"
83mm
3
¼ "
450mm
18"
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and/or CE approved wires for all input connections,
minimum size required 18 AWG(0.82mm²)
• Do not use this product in environments where the
temperatures could exceed 60°C (140°F)
38.5 x 28.5 x 16.5 cm
15⅛ x 11¼ x 6½ in
5.7 kg
12.5 Ibs
02
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Hanging System
1.
2.
• Handle fixture with care while unpacking
the unit from its packaging and carefully
examine the unit for defects before
installing. Report any damage and save
all packing materials if any part is
damaged during transport. We
recommend wearing work gloves when
installing this fixture to prevent dirt and oil
from coming into contact with the fixture.
• Use the SSL mounting bracket as a
template to mark the screw holes location
onto the intended surface.
03
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Hanging System
3.
4.
• For concrete surfaces use a Ø5/16"
(8.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
(Make sure that all dimensions are precise)
• Hammer all four concrete anchors into the
four drilled holes until they are flush with
the surface.
• Tighten all four hexagon spacers firmly
into the concrete anchors.
• For wooden surfaces use a Ø1/8"
(5.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
• Tighten all four hexagon spacers firmly
into the drilled holes.
• Insert the AC input extension cable wire
from the top of the mounting bracket
down through the pipe coming out at the
bottom SSL mounting bracket.
• Align and tighten the SSL Pipe Hanging
Bracket onto the hexagon spacers using
the hexagon nuts and washers provided in
the kit.
• Make sure that the AC input cable wire at
the top passes through the side exiting
hole of the top SSL mounting bracket.
Concrete
Quick Connect
Wood
Push
R HS
o
compliant
IP68
04
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Hanging System
5.
• Align the 4 spring loaded bolts located on top of the fixture with the 4 larger holes along the
semicircular slotted holes.
• Push the fixture firmly upwards until the springs are compressed and the bolt heads have gone
through the slotted holes of the SSL mounting bracket. Then Slide the complete fixture until the bolt
heads have fallen into the recessed groove of the mounting bracket.
• Check to make sure that the fixture is firmly in place.
• Insert the fixture input AC cable wire through the center hole of the SSL mounting bracket and
pass it through the side exiting hole of the mounting bracket.
Push
Quick Connect
I
II
Push
05
ILX3525 Series
LED Industrial Lighting

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Hanging System
6.
• Before connecting any AC input electrical wiring to the electric grid make sure to Slide OFF power to
all appropriate circuit at the breaker box.
• Carefully unscrew and remove the junction-box cover.
• Insert AC line input wires through the knock out hole. Install proper electrical fittings at the knockout
hole for wire protection, provided with the installation kit. Nominal strip length with 5/8" (15 mm) long.
• Connect the AC input line (L) wire to the corresponding marked AC line (L-BLACK) wire with a wire
nut. Connect the AC input neutral (N) wire to the corresponding marked AC neutral (N-WHITE) wire
with a wire nut. Ground fixture by connecting the input ground wire ( ) to the corresponding marked
ground wire ( - GREEN) on the quick connect terminal block.
• Firmly tighten junction-box cover before testing the fixture.
Warning!
Push
06
ILX3525 Series
LED Industrial Lighting

INSTALLATION GUIDE SSL - Spring Loaded Snap & Slide Hanging System
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit breaker or fuse box before installing, servicing
or inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified product wattage.
• Use UL and / or CE approved wires for all input connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the temperatures could exceed 60°C (140°F)
NOTE
• While the fixture is ON, do not cover the front surface of the
light fixture or place it on any flat surfaces that would cover
the front air ventilation holes for more than 30 minutes.
This will prevent the fixture from properly cooling via air
convection and can cause the fixture to overheat & fail.
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Dimming
Dim – (Brown)
NOTE: • Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input connections,
minimum size required 18 AWG (0.82mm²)
• Refer to the specific dimmer installation manual for exact
wiring instructions.
N– (White)
L– (Black)
Ground (Green)
Dim + (Blue)
AC Input
Wiring Information
LeD is a trademark of Light Emitting Designs, Inc.
© 2017 Light Emitting Designs, Inc.
ILX3525 SSL INST GUIDE 04262016
www.lightemittingdesigns.com
2140 N. Hollywood Way #6486 Burbank, CA 91510 USA
tel: [phone], e-mail: [email protected]
07
ILX3525 Series
LED Industrial Lighting