Light Emitting Designs RWL II Series User manual

INSTALLATION GUIDE
RWL II Series
LED Street Lighting
FEATURES AND APPLICATIONS
• L70 Rating @ Ta 25°C Over 170,000 hour rated life
• 10-Year Limited Warranty
• IP68 (Water / Dust / Vapor Proof) rated fixture
• Low profile industrial grade design
• Easy to install
• Type II Street Lighting
• Type V Round
• Type V Square
• Parking Lots
• Perimeter Lighting
• Parks and Walkway Lighting
ITEMS INCLUDED FOR INSTALLATION
• One RWLII LED Street Light
• Two Ø10mm pipe anchoring bolts
• One Ø10mm O-ring bolt
• Installation manual
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
E351107
01
Roadway Pole Mount

INSTALLATION GUIDE
RWL II Series
LED Street Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
E351107
18 ¼ "
465mm
External Dimensions
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician
and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit
breaker or fuse box before installing, servicing or
inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input
connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the
temperatures could exceed 55°C (131°F)
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Packaging Information
Case Quantity Dimensions (LxWxH) Weight
150 x 50 x 31 cm
19⅝ x 19⅝ x 12¼ in
13 kg
28.6 Ibs
02
224mm
8⅞"
3⅛"
Ø80mm
Roadway Pole Mount

INSTALLATION GUIDE
RWL II Series
LED Street Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
E351107
1.
2.
• Handle fixture with care while unpacking
the unit from its packaging and carefully
examine the unit for defects before
installing. Report any damage and save
all packing materials if any part is
damaged during transport. We
recommend wearing work gloves when
installing this fixture to prevent dirt and oil
from coming into contact with the fixture.
• Hoist the fixture up to the desired height
and position by safely latching a hook
through the O-ring provided on top of the
fixture.
03
Roadway Pole Mount

INSTALLATION GUIDE
RWL II Series
LED Street Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
E351107
3.
Push
Push
Quick Connect
Warning!
• Before connecting any AC input electrical wiring to the electric grid make sure to turn OFF
power to all appropriate circuit at the breaker box.
• Connect the fixture to the AC input wire via the quick connector provided in the fixture kit. Make
sure the AC input line (L) and neutral (N) from the electric grid are inserted into the corresponding
slot of the quick connector (L-BLACK & N-WHITE).
• Align the fixture mounting hole with the pipe and firmly insert the fixture onto the pipe until it is
completely in.
• Make sure that all wires are cleared.
04
Roadway Pole Mount

INSTALLATION GUIDE
RWL II Series
LED Street Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
E351107
5.
• Remove the hoist chain from the O-ring
once the fixture is firmly secured to the
pole.
• Test fixture to make sure positioning &
light distribution is correct.
4.
• Adjust the fixture by rotating the vertical
center to 0° for an optimum and symmetric
light distribution pattern.
• Tighten the two hexagon bolts on top of
the fixture to firmly anchor the fixture onto
the pole.
05
Roadway Pole Mount

INSTALLATION GUIDE
RWL II Series
LED Street Lighting
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit breaker or fuse box before installing, servicing
or inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified product wattage.
• Use UL and / or CE approved wires for all input connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the temperatures could exceed 55°C (131°F)
NOTE
• While the fixture is ON, do not cover the front surface of the
light fixture or place it on any flat surfaces that would cover
the front air ventilation holes for more than 30 minutes.
This will prevent the fixture from properly cooling via air
convection and can cause the fixture to overheat & fail.
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Dimming
Dim – (Brown)
NOTE: • Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input connections,
minimum size required 18 AWG (0.82mm²)
• Refer to the specific dimmer installation manual for exact
wiring instructions.
N– (White)
L– (Black)
Ground (Green)
Dim + (Blue)
AC Input
Wiring Information
www.lightemittingdesigns.com
2140 N. Hollywood Way #6486 Burbank, CA 91510 USA
tel: 1-855-4LEDPRO, e-mail: [email protected]
06
RWLII IG REV01012022
Roadway Pole Mount