Lightmybricks 21058 User manual

LEGO® GREAT PYRAMID OF GIZA
#21058 LIGHT KIT
INSTALLATION GUIDE

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO GREAT PYRAMID OF GIZA 21058
LIGHT KIT INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Great Pyramid of Giza 21058 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
2x Large Blue Bit Light 30cm
2x Green Bit Light 30cm
2x Large Warm White Bit Light 30cm
4x Orange Bit Light 30cm*
2x Large Orange Bit Light 30cm
3x 6-Port Expansion Board
1x Flicker Eects Board
8x Adhesive Square
• 6x Plate 1x1 Mod Rounded w Handle - Black
• 6x Round Plate 1x1 Open Stud - Black
• 6x Tile 1x1 W Clip Round Edges - Black
• 4x Plate 1x2 MW Stud Jumper - Black
• 4x Tile 1x1 - Black
• 1x Plate 1x1 - Black
• 1x Plate 2x2 w Rounded Bottom – Trans Clear
• 1x Round Plate 1x1 Open Stud - Trans Orange
• 3x Round Plate 1x1 - Trans Orange
• 1x Wave Rounded Small with Pin (Candle Flame)
3x 5cm Connecting Cable
1x USB Power Cable
(Power Source not Included)
* Indicates components which include spares

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
31
32
37

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
21x1 Round Plate Open Stud -
Black
Plate 1x1 Mod Rounded w/
Handle - Black
Large Warm White Bit Light 30cm

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
3
Tile 1x1 W Clip Round Edges
- Black
Tile 1x1 - Black
x2
41x1 Round Plate Open Stud -
Black
Green Bit Light 30cm

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5
x2
Plate 1x1 Mod Rounded w/
Handle - Black
Tile 1x1 W Clip Round Edges
- Black
Plate 1x1 - Black
Plate 1x2 MW Stud Jumper -
Black
Plate 1x2 MW Stud Jumper -
Black

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
6
7
Orange Bit Light 30cm
Round Plate 1x1 - Trans Orange

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8
91x1 Round Plate Open Stud -
Black
Large Blue Bit Light 30cm

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10
x2
Plate 1x1 Mod Rounded w/
Handle - Black
Tile 1x1 W Clip Round Edges
- Black
Plate 1x2 MW Stud Jumper -
Black

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
11
Connect the 5cm
Connecting Cable
into the “OUT” port
of the Flicker Eects
Board
Connect a new
5cm Connecting
Cable into the “IN”
port of the Flicker
Eects Board
Connect the
Orange Bit Light
Cable from the
boat to the 6-Port
Expansion Board
Tile 1x1 - Black
6-Port Expansion Board 6-Port Expansion Board
5cm Connecting Cable
Flicker Eects Board
5cm Connecting Cable

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
12
13
Use the second
Large Warm White
LED Spotlight

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
15
Take the second
Green LED Spotlight
Take the second
Large Blue LED
Spotlight
Tile 1x1 - Black

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
16 Take the Green
and Large Blue
Spotlight cables on
the right side
Lift from the
middle of the front to
flip it up on its side
Tile 1x1 - Black
6-Port Expansion Board
Take the Green
and Large Blue
Spotlight cables on
the left side

LEGO GREAT PYRAMID OF GIZA 21058 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the
other end of the 5cm
Connecting Cable
to second 6-Port
Expansion Board
from Step 11 (the one
connected to the ‘IN’
port of the Flicker
Eects Board)
Take the Warm
White Spotlight
Cable from the right
side and connect it
into the same 6-Port
Expansion Board
Take the Warm
White Spotlight
Cable from the left
side and connect it
into the same 6-Port
Expansion Board
Peel o the
adhesive square
backings
Take the 6-Port
Expansion Board
with the Green and
Large Blue Spotlights
5cm Connecting Cable
2x Adhesive Square