Lightmybricks 75339 User manual

LEGO® DEATH STAR TRASH COMPACTOR
DIORAMA #75339 LIGHT KIT
INSTALLATION GUIDE

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO DEATH STAR TRASH COMPACTOR
DIORAMA 75339 INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Death Star Trash Compactor Diorama 75339 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
11x Cool White 15cm Bit Light *
1x Red 30cm Bit Light
1x 12-Port Expansion Board
2x Adhesive Square
• 4x Plate 1x1 Mod Rounded w Handle - Black
• 2x Round Plate 1x1 Open Stud - Black
• 2x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
• 1x Round Plate 1x1 Open Stud - Light Grey
• 8x Round Plate 1x1 - Trans Red
1x USB Power Cable
(Power Source not Included)
* Indicates components which include spares

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
23
24
29

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1 2
Remove the hose
on this side and
place it against the
wall for later
Lift up and back
to remove the wall
piece from the side
walls and base

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
3 4 Red 30cm Bit Light
Round Plate 1x1 Open Stud -
Light Grey
For this and
future steps, use the
included LEGO Brick
Separator Tool or
similar pry tool to
remove pieces

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5
6
USB Power Cable
12-Port Expansion Board

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
7
Connect the other
end to a 5V USB
Power Bank, 5V USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red
Push from
the front side to
disconnect the part,
then lift it up and pull
it out between the
cross bars

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Cool White 15cm Bit Light
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red
Round Plate 1x1 - Trans Red
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red
Cool White 15cm Bit Light
Round Plate 1x1 - Trans Red
9

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10
Thread the bunch
of cables through
then replace the
door part, then put
the cables between
the wall panels and
reconnect the part
If you’re having
trouble with this
part, reconnect the
section first, then pull
the cables behind by
gently sepearting the
wall sections.

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
11
12

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
13
Connect the other
end to a 5V USB
Power Bank, 5V USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Cool White 15cm Bit Light
Round Plate 1x1 Open Stud
- Black
Slot the cable in
between the gap of
the back wall panel

LEGO DEATH STAR TRASH COMPACTOR DIORAMA 75339 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Plate 1x1 Mod Rounded w
Handle - Black
Plate 1x1 Mod Rounded w
Handle - Black 14
Arm Skeleton, Bent with Clips
(Horizontal Grip) - Black
x2