Lightmybricks 10265 User manual

INSTALLATION GUIDE 1FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO Ford Mustang
10265 Light Kit
Installation Guide

INSTALLATION GUIDE 2FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE
Hello, we’re Light My Bricks.
We’re here to help you get started on
the LEGO Ford Mustang (10265)
Lighting Kit.
This PDF lists instructions for the
LED light kit only. If you are wishing
to purchase the Light My Bricks Ford
Mustang (10265) LED Lighting Kit,
please click here to view the product
page.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACAKAGE CONTENTS
PACKAGE CONTENTS:
8 x White 15cm Bit Lights
7 x White 30cm Bit Lights
1 x 8-Port Expansion Board
1 x 12-Port Expansion Board
1 x NC Push Board
1 x 15cm Connecting Cable
1 x 30cm Connecting Cable
1 x USB Power Cable - USB Power Cable has replaced Flat,
Round, and AA Battery Packs as of June 2022 due to child
safety regulations. Please use the USB Power Cable in place
of the Battery Pack.
LEGO PIECES:
6 × Trans Clear Round Plate 1×1
1 × Trans Clear Plate w Rounded Bottom 2×2

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 3
Contents 4. Before You Begin
8. Steps
20. Final product
21. Troubleshooting
26. Contact
CONTENTS

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTINGCABLECONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 5
CONNECTINGCABLECONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
STEPS
White 30cm Bit Light
1
2
Trans Clear Round Plate 1x1
x 2

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
STEPS
3
White 30cm Bit Light
Trans Clear Round Plate 1x1
x 2
4

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
USB Power Cable
has replaced Flat,
Round, and AA
Battery Packs as
of June 2022 due
to child safety
regulations.
Connect the USB
Power Cable to a
USB Power Bank
White 30cm Bit Light
x 2
8-Port Expansion Board
Flat Battery Pack
5

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 11
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
6
STEPS
Disconnect Bit
Lights from
Expansion Board

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 12
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
STEPS
7
8

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
STEPS
9
NC Push Board
30cm Connecting Cable
White 30cm Bit Light
Trans Clear Plate w Rounded Bottom 2×2
Connect Bit Light
to the NC Push
Board OUT port
Connect the
Connecting Cable
to the NC Push
Board IN port

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 14
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
STEPS
10
Ensure the NC push
button is facing out and
the edge of the board
is in line with the edge
of the door way, so that
when the door closes,
it pushes the button to
de-activate the internal
light.

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 15STEPS
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
15cm Connecting Cable
11
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
Internal Bit Light
should de-activate
when the door is
closed
12-Port Expansion Board USB Power Cable
has replaced Flat,
Round, and AA
Battery Packs as
of June 2022 due
to child safety
regulations.
Connect the USB
Power Cable to a
USB Power Bank

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 16STEPS
12
White 15cm Bit Light
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
Trans Clear Round Plate 1x1
x 2

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 17
13
STEPS
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
White 15cm Bit Light
White 15cm Bit Light
White 15cm Bit Light

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 18
14
STEPS
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
White 15cm Bit Light
White 15cm Bit Light
White 15cm Bit Light

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 19
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
STEPS
If you are using
the USB Power
Cable, run the
cable out from the
back of the car.

FORD MUSTANG 10265 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 20
LEGEND: DISCONNECT TURN / FLIP TWIST/BRAIDDIRECTIONAL POWER ON / TESTCONNECT/RECONNECT
Final product
This nally completes installation of the Light My Bricks
Ford Mustang 10265 Light Kit
FINAL PRODUCT