Lightmybricks 76956 User manual

LEGO T.REX BREAKOUT #76956
LIGHT KIT
INSTALLATION GUIDE

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO T.REX BREAKOUT 76956
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
T.Rex Breakout 76956 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
2 x Rotating 30cm Bit Light
2 x Flashing White 30cm Bit Light
1 x White 30cm Bit Light
1 x Cool White 15cm Bit Light
1 x Cool White 30cm Large Bit Light
4 x White 15cm Bit Light
4 x Red 30cm Bit Light
3 x Warm White 30cm Micro Bit Light *
2 x 6-Port Expansion Board
1 x 8-Port Expansion Board
1 x 4-Port Micro Expansion Board
1 x Scary Effects Board
1 x Flicker Eects Board
•3 x Plate 1x2 - Light Grey
•1 x Plate 2x2 - Dark Grey
•1 x Bracket 1x1 - Light Grey
•3 x Round Plate 1x1 Open Stud - Black
•2 x Plate 1x1 Mod Rounded w Handle - Black
•2 x Round Plate 1x1 - Trans Light Blue
•2 x Round Tile 1x1 - Trans Red
•2 x Round Brick 1x1 - Trans Red
•2 x Tile 1x1 W Clip Round Edges - Black
•1 x Plate 2x2 W Rounded Bottom - Trans Clear
3 x 5cm Connecting Cable
1 x 30cm Connecting Cable
1 x 50cm Connecting Cable
1x USB Power Cable
(Power Source not Included) * Indicates components which include spares

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
36
37
42

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT
6-Port Expansion
Board
30cm
6-Port Expansion
Board
USB Power Supply
Gate Upturned Car
Rotating 30cm
Bit Light
Flashing White
30cm Bit Light
2x White 15cm
Bit Light
8-Port Expansion
Board
Scary Eects
Board
Flicker Eects
Board
2x Red 30cm
Bit Lights
2x White 15cm
Bit Lights
5cm
5cm
50cm
5cm
2x White 30cm
Micro Bit Light
4-Port Micro
Expansion Board
Cool White
Large Bit Light
2xWhite 30cm
Bit Light
Rotating 30cm
Bit Light
Flashing White
30cm Bit Light
2x Red 30cm
Bit Light
Cool White
15cm Bit Light
Car

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
2

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 15cm Bit Light
3

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Red 30cm Bit Light
Red 30cm Bit Light

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
4

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5
50cm Connecting Cable
6-Port Expansion Board
Hold the 50cm
Connecting Cable in
the same position as
the Left Bit Light (at
the same length).

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
6

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
7
Round Brick 1x1 - Trans Red
Round Tile 1x1 - Trans Red
Rotating Bit Light 30cm
8

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
9
Flashing White 30cm Bit Light
Round Plate 1x1 - Trans Light
Blue
Repeat step 5 to
left side pole.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10
1x2 - Light Grey
1x2 - Light Grey
Black Round Plate 1x1
w/ Open Stud
Cool White 30cm Large Bit Light
Black 1x1 Plate Modified Plate
Rounded w/ Handle
11

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
12
• Bck 1x1 Tie w/ Cip
Rounded Edges
• Brcke 1x1 - Ligh Gre
2x2 - Dark Grey 1x2 - Light Grey 6-Port Expansion Board
Connect the two
lights from the left
side of the fence.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
USB Power Cable
30cm Connecting Cable Pull USB Cable to
the back.
13
Twist the cables
but ensure to leave
enough slack so the
6-Port Expansion
Board can reach the
middle spotlight.
Pull all the
unconnected cables
minus the USB Power
Cable towards the
front of the set before
reconnecting the
fence .