Lightmybricks LEGO MARVEL SPIDER-MAN CARNAGE User manual

LEGO® MARVEL SPIDER-MAN
CARNAGE
#76199 LIGHT KIT
INSTALLATION GUIDE

LEGO MARVEL SPIDER-MAN CARNAGE 76199 LIGHT KIT INSTALL GUIDE
2
Light My Bricks
LEGO® MARVEL SPIDER-MAN CARNAGE
#76199 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO® Marvel
Spider-Man Carnage (76199) Light Kit.
This PDF details the instructions for the LED light kit only.
If you run into any issues, please refer to the
troubleshoot-ing section towards the end of this guide.
Have fun and enjoy!
INSTALLATION GUIDE

LEGO MARVEL SPIDER-MAN CARNAGE 76199 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
2 x Cool White 30cm Bit Light
2 x Cool White Large 30cm Bit Light
2 x Pink 30cm Bit Light
1 x 8-Port Expansion Board
•• 2 × Black Plate 1x6
•• 2 × Black Round Plate 1x1 w Open Stud
•• 2 × Black Arm Skeleton, Bent w Clips (Horizontal Grips)
•• 4 × Black Plate 1x1 Modified Rounded w Handle
1 x USB Power Cable
(Power Source not Included)

LEGO MARVEL SPIDER-MAN CARNAGE 76199 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 16
Troubleshooting 17
Contact 22

LEGO MARVEL SPIDER-MAN CARNAGE 76199 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.