Lightmybricks LEGO CORNER GARAGE User manual

LEGO® CORNER GARAGE #10264
LIGHT KIT
INSTALLATION GUIDE

LEGO CORNER GARAGE 10264 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO CORNER GARAGE 10264
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Corner Garage 10264 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO CORNER GARAGE 10264 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
10 x White 15cm Bit Light
4 x White 30cm Bit Light
3 x Pink 30cm Bit Light
1 x Blue 30cm Bit Light
1 x Lamp Post with Bit Light installed
8x White Strip Lights
2 x 6-Port Expansion Board
1 x 8-Port Expansion Board
1 x 12-Port Expansion Board
6 x Adhesive Squares
• 2x Trans Clear Round Plate 1×1
• 2x Trans Red Round Plate 1×1
• 6x Plate 1×6 (Any Colour)
• 2x Black Round Plate 1×1 with Open Stud
• 2x Black Tile 1×1 with Clip Rounded Edges
• 2x Black 1×1 Modified Plate Rounded with Handle
7x 15cm Connecting Cable
3x 30cm Connecting Cables
1x USB Power Cable
(Power Source not Included)
* Indicates components which include spares
ADDITIONAL COMPONENTS TO USE
WIRELESS POWER CONNECTORS
(SOLD SEPERATELY)
3 x Wireless Power Connectors sets (available to purchase in a 2pk)
2 x 2-Port Expansion Board (available to purchase in a 4pk)
3 x Plate 1x6 (Any Colour)
NOTE: If you choose to use the Wireless Power Connectors, we recommend purchasing
the aforementioned components before beginning.

LEGO CORNER GARAGE 10264 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
9
76
77
83

LEGO CORNER GARAGE 10264 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.