Lightmybricks LEGO DARTH VADER User manual

LEGO® DARTH VADER
MEDITATION CHAMBER
#75296 LIGHT KIT
INSTALLATION GUIDE

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® DARTH VADER MEDITATION
CHAMBER #75296 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Darth Vader Meditation Chamber (75296) Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
8 x Red 30cm Bit Lights
3 x Cool White 15cm Bit Lights
1 x Light My Bricks Lightsaber - Red
1 x Red Flashing 30cm Bit Light
1 x 6 Port Expansion Board
1 x 12 Port Expansion Board
2 x Adhesive Squares
• 8 x Trans-Red 1x1 Plates
• 1 x Trans-Red 1x1 Round Plates
• 2 x Trans-Clear 2x2 Plate with Rounded Bottom (Boat Tile)
1 x 15cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 17
Troubleshooting 18
Contact 23

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
LMB Lightsaber - Red
2

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect to a
USB, Power Bank,
USB to AA BAttery
Pack or USB Wall
Adaptor (each sold
separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
6-Port Expansion Board
USB Power Cable
3

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
4 5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Red Flashing 30cm Bit Light
Cool White 15cm Bit Light
Trans Clear Round Plate
2x2 w/ Rounded Bottom
Trans Red Round Plate 1x1

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Cool White 15cm Bit Light
Trans Clear Round Plate
2x2 w/ Rounded Bottom

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
15cm Connecting Cable 2x Adhesive Squares

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
7
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Remove all 8
parts
Red 30cm Bit Light
Trans Red Plate 1x1
x8

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Pull up 15cm
Connecting Cable
from step 4 and
connect to the 12
Port Expansion
Board
12-Port Expansion Board
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Disconnect the
top part of the panel
to feed the Cool
White 15cm Bit Light
through
Cool White 15cm Bit Light
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
FINAL PPRODUCT 17
FINAL PRODUCT
This finally completes installation of the Light My Bricks
Darth Vader Meditation Chamber 75296 Light Kit.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING 18
TROUBLESHOOTING
Light My Bricks lighting
kits contain individual
components that are very
small and can be easily
damaged if not handled
correctly.
To prevent unnecessary
damage to components,
we highly recommend that
the User Guide section,
“Important things to note”
is read carefully. Follow the
handling procedures in the
User Guide to help prevent
faults and damages to your
Light My Bricks components.
If you are experiencing
issues with your Light
My Bricks set, watch our
troubleshooting video
here or read on for a list of
common causes to help you
troubleshoot.

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING 19
Troubleshooting
Firstly, ensure that the
baeries have power using a
baery charge gauge.
If the baeries have no power,
replace the baeries.
If the baeries still have
power, check to see if the
baeries have been inserted
correctly into the baery
pack.
Check For CR2032 Baeries
Using The Flat Baery Pack
Inside the battery pack is a symbol
indicating which side the (round) CR2032
battery should be inserted. Check that
the “+” side of the battery pack has
the battery with the “+” symbol facing
downwards.
On the opposite side, the “-” side of the
battery pack should have the battery
flipped upside down, that is the “+” symbol
facing upwards
CR2032

LEGO DARTH VADER MEDITATION CHAMBER 75296 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING 20
Troubleshooting
Check For Cr2032 Baeries
Using The Round Baery
Pack
Inside the battery pack is a symbol indicating
which side the (round) CR2032 battery should
be inserted. In this case, for the stacked
battery pack, ensure that BOTH batteries
have the “+” symbol facing upwards.
Check for AA baeries
using the AA baery pack
Inside the battery pack are symbols
indicating which direction the AA battery
should be inserted. The flat side of the
battery should be paired with the spring
side of the battery pack.
If the batteries have been installed
correctly and your kit still isn’t operating
correctly, the next step is to check the
wiring.
CR2032