Lightmybricks LEGO 1989 Batwing 76161 User manual

INSTALLATION GUIDE 1LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO®1989 Batwing™
76161 Light Kit Installation
Guide

INSTALLATION GUIDE 2LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO®1989Batwing™ (76161)
Lighting Kit.
This PDF details the instructions for
the LED light kit only.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
4 x Cool White 30cm Bit Lights
6 x White 15cm Bit Lights
10 x White 15cm Micro Bit Lights
(Req 8, inc. 2 Spare)
7 x White Strip Lights
1 x 6-Port Expansion Board
1 x 8-Port Expansion Board
1 x 2 to 8 Port Micro Expansion Board
1 x Gun Effects Board
1 x 5cm Connecting Cable
5 x 15cm Connecting Cables
4 x 30cm Connecting Cables
1 x USB Power Cable
2 x Adhesive Squares
LEGO PIECES:
4 × Black Plate 1x2
2 × Trans Black Tile 1x2
2 × Trans Clear Plate 1x1
1 × Trans Red Round Plate 1x1
1 × Trans Dark Green Round Plate 1x1

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
8. Instructions
29. Final Product
30. Troubleshooting
35. Contact
CONTENTS
LEGEND:DISCONNECT DIRECTIONAL
LEGENDE:TRENNEN DIRECTIONAL
LÉGENDE:DÉCONNECTER DIRECTIONNEL
LEGGENDA: SCOLLEGARE
CONNECT / RECONNECT
VERNINDEN / WIEDERVERBINDEN
CONNECTER / RECONNECTER
CONNETTI / RICONNETTI
TURN / FLIP
WENDEN / KIPPEN
TOUR / INCLINAISON
ROTARE / INCLINARE DIREZIONALE
TWIST / BRAID
DREHEN / VERDREHEN
TORSION / TRESSER
TWIST / TRECCIA
POWER ON / TEST
EINSCHALTEN / TESTEN
POWER ON / TEST
POWER ON / TEST

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
1 2
STEPS
White 15cm Bit Light
x2
Trans Black Tile 1x2
x2
8-Port Expansion Board

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
3
4
STEPS
30cm Connecting Cable
White Strip Light
30cm Connecting Cable
White Strip Light
15cm Connecting Cable

LEGO 1989 BATWING 76161 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
5
STEPS