Lightmybricks LEGO STATUE OF LIBERTY 21042 User manual

LEGO® STATUE OF LIBERTY
#21042 LIGHT KIT
INSTALLATION GUIDE

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® STATUE OF LIBERTY #21042 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Statue of Liberty (21042) Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
1 x Bit Light - White 30cm
1 x Large Bit Light - Warm White 30cm
2 x Large Bit Light - Cool White 30cm
4 x Strip Light - White
1 x 6-Port Expansion Board
1 x 2-Port Expansion Board
2 x Adhesive Square
• 2 x Plate 1x1 Mod Rounded w Handle - Black
• 2 x Tile 1x1 w Clip Round Edges - Black
• 2 x Round Plate 1x1 Open Stud - Black
• 1 x Round Plate 1x1 - Trans Orange
4 x 5cm Connecting Cable
1 x 15cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 8
Final Product 18
Troubleshooting 19
Contact 24

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
12x
Connect 8 of the
1x1 Plates removed
at the beginning
of this step, in the
positions shown.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5cm Connecting Cable
5cm Connecting Cable
5cm Connecting Cable
15cm Connecting Cable
White Strip Light
White Strip Light
White Strip Light
White Strip Light

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
4
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Stick the White
Strip Lights on
1x6 White Plates
removed in step 2.
Connect the
15cm Connecting
Cable from step 3.
Allow approx.
20cm of USB Power
Cable length over
the edge before
reconnecting the top
section.
Repeat this for
all the 3 corners
excluding the 15cm
Connecting Cable.
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
6-Port Expansion Board
USB Power Cable
4x
Connect the
other end to a USB
Power Bank, USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
5 6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Cool White 30cm Large Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Plate Modified Plate
Rounded w/ Handle
• Bck 1x1 Tie w/ Cip
Rounded Edges

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
2x
Connect Bit
Lights to 6-Port
Expansion Board
from step 4.
7

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Bit Light
Trans Orange Round Plate 1x1

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
9
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Warm White 30cm Large Bit Light Adhesive Square
2-Port Expansion Board
5cm Connecting Cable

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Connect both
remaining lights
to the 6-Port
Expansion Board
from step 4.
Rest the statue
on the pillar and
Light Kit Box.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
FINAL PPRODUCT 18
FINAL PRODUCT
This finally completes installation of the Light My
Bricks Statue of Liberty 21042 Light Kit.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING 19
TROUBLESHOOTING
Light My Bricks lighting
kits contain individual
components that are very
small and can be easily
damaged if not handled
correctly.
To prevent unnecessary
damage to components,
we highly recommend that
the User Guide section,
“Important things to note”
is read carefully. Follow the
handling procedures in the
User Guide to help prevent
faults and damages to your
Light My Bricks components.
If you are experiencing
issues with your Light
My Bricks set, watch our
troubleshooting video
here or read on for a list of
common causes to help you
troubleshoot.

LEGO STATUE OF LIBERTY 21042 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING 20
Troubleshooting
Firstly, ensure that the
baeries have power using a
baery charge gauge.
If the baeries have no power,
replace the baeries.
If the baeries still have
power, check to see if the
baeries have been inserted
correctly into the baery
pack.
Check For CR2032 Baeries
Using The Flat Baery Pack
Inside the battery pack is a symbol
indicating which side the (round) CR2032
battery should be inserted. Check that
the “+” side of the battery pack has
the battery with the “+” symbol facing
downwards.
On the opposite side, the “-” side of the
battery pack should have the battery
flipped upside down, that is the “+” symbol
facing upwards
CR2032