Lightmybricks LEGO CHEVROLET CAMARO Z28 10304 LIGHT KIT User manual

LEGO®CHEVROLET CAMARO Z28
#10304 LIGHT KIT
INSTALLATION GUIDE

INSTALLATION GUIDE 2
Light My Bricks
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
LEGO®CHEVROLET CAMARO Z28 10304
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Chevrolet Camaro Z28 10304 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
5x White 30cm Bit Light *
3x Warm White 30cm Large Bit Light
7x Red 30cm Bit Light *
2x 8-Port Expansion Board
1x N/C Push Board
• 2x Round Plate 1x1 - Trans Clear
• 1x Plate 2x2 w/ Rounded Bottom - Trans Clear
• 4x Plate 1x1 - Trans Red
• 2x Tile 1x2 - Trans Red
1x 30cm Connecting Cable
1x 5cm Connecting Cable
1x USB Power Cable
(Power Source not Included)
+ 4x Adhesive Square * Indicates components which include spares

CONTENTS 4
Contents
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
Before You Begin 5
Blueprint 8
Instructions 9
Final Product 31
Troubleshooting 32
Contact 36

BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO®bricks, plates, and tiles providing
they are laid correctly between the LEGO®
studs. Do NOT forcefully join LEGO®
together around cables; instead ensure
they are laying comfortably in between
each stud.
CAUTION: Forcing LEGO®to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO®studs or in between.
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE

BLUEPRINT 8
BLUEPRINT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 10
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
1
2 3
White 30cm Large Bit Light
Plate 2x2 w/ Rounded Bottom -
Trans Clear

INSTRUCTIONS 11
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
4
Plate 2x2 w/ Rounded Bottom -
Trans Clear
White 30cm Large Bit Light
NOTE
Use your finger to push the
curved panel upwards from
inside the wheel arch. Slightly
disconnect but do not remove.

INSTRUCTIONS 12
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
5
5
NOTE
Use the LEGO Brick Separator
or similar to pry the section o

INSTRUCTIONS 13
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
White 30cm Bit Light
White 30cm Bit Light
Round Plate 1x1 - Trans Clear
Round Plate 1x1 - Trans Clear

INSTRUCTIONS 14
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
6
7 8
8-Port Expansion Board

INSTRUCTIONS 15
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
95cm Connecting Cable
8-Port Expansion Board
USB Power Cable
NOTE
The USB Power Cable can be
routed through any of the holes
underneath the car on either
side depending on where you
want to power it from

INSTRUCTIONS 16
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
10
NOTE
Connect to a 5V USB Power
Bank, 5V USB Wall Adaptor, or
USB to AA Battery Pack (sold
separately)
If you experience any issues with the
lights not working and suspect an issue
with a component, please try a dierent
port on the expansion board to verify
where the fault lies (with the light or
expansion board). To correct any issues
with expansion board ports, please view
the section addressing expansion board
issues in our troubleshooting section.
!
!

INSTRUCTIONS 17
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
11
12
N/C Push Board
30cm Connecting Cable
White 30cm Large Bit Light
NOTE
If you wish to display the car in
convertible mode you choose
whether to install the following
parts. If so, you will need to locate
the Bit Light elsewhere in the
interior as it is placed on the roof.

INSTRUCTIONS 18
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
13
14
NOTE
Use the Warm White 30cm
Large Bit Light connected to
the N/C Push Board.
Plate 2x2 w/ Rounded Bottom -
Trans Clear

INSTRUCTIONS 19
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
15
NOTE
Bunch the loose cable behind
the seat then reconnect it.

INSTRUCTIONS 20
DIRECTIONAL
CONNECT
DISCONNECT TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO®CHEVROLET CAMARO Z28 10304 LIGHT KIT INSTALL GUIDE
16
NOTE
Plug the 30cm Connecting
Cable from the N/C Push
Board into the 6-Port
Expansion Board with only one
other cable plugged into it.