Lightmybricks LEGO INFINITY GAUNTLET 76191 User manual

LEGO® INFINITY GAUNTLET
#76191 LIGHT KIT
INSTALLATION GUIDE

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® INFINITY GAUNTLET #76191 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Ifinity Gauntlet (76191) Light Kit.
This PDF details the instructions for the LED light & sound kit
only. If you are wishing to purchase this product, please click
here to view the product page.
If you run into any issues, please refer to the troubleshooting
section towards the end of this guide.
Have fun and enjoy!

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
13 x Cool White 15cm Bit Lights *
1 x Green 30cm Large Bit Light
3x Warm White 30cm Large Bit Lights
1 x 6-Port Expansion Board
3 x 8-Port Expansion Boards *
• 2 × Black Plate 1x6
• 3 × Black Round Plate 1x1 w Open Stud
• 2 × Black Arm Skeleton, Bent w Clips (Horizontal Grips)
• 5 × Black Plate 1x1 Modified Rounded w Handle
• 1 × Black 1x1 Tile w/ Clip Rounded Edges
• 1 × Black Dish 2x2 Inverted
1 x Pulse Eects Board
2 x 5cm Connecting Cables
2 x 15cm Connecting Cables *
1 x USB Power Cable
(Power Source not Included)
Asterisks * indiciates 1 extra component has been included just in case!

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 8
Final Product 29
Troubleshooting 30
Contact 35

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
This element
will be permanently
removed

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
4 5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
2x Cool White 15cm Bit Lights

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Use the LEGO
Removal Tool to
push the cables
down into the corner
2x Cool White 15cm Bit Lights

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
7
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2x Cool White 15cm Bit Lights
2x Cool White 15cm Bit Lights

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
9
10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2x Cool White 15cm Bit Lights

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
11 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Cool White 15cm Bit Light Cool White 15cm Bit Light

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
13
14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Identify the 4
longest cables to
first connect to the
8-Port Expansion
Board.
8-Port Expansion Board
4

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
15 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Take any 3x Bit
Light cables and
connect them to the
8-Port Expansion
Board.
3
5cm Connecting Cable
Pulse Eects Board
Connect the 5cm
Connecting Cable
to the first OUT port
channel on the Pulse
Eects Board
Take the
remaining 5x Bit Light
cables and connect
them to a new 8-Port
Expansion Board.
58-Port Expansion Board
5cm Connecting Cable
Connect the 5cm
Connecting Cable to
the second OUT port
channel on the Pulse
Eects Board

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
17 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect to a USB
Power Bank, USB to
AA Battery Pack or
USB Wall Adaptor
(each sold separately)
USB Power Cable
Choose from 3
dierent pulse eects
by setting the switch
to your desired eect:
Fast, Medium, Slow
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Disconnect USB
Power Cable

LEGO INFINITY GAUNTLET 76191 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
19 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Green 30cm Large Bit Light
Reconnect the
USB Power Cable to
the IN port channel
of the Pulse Eects
Board
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.