Lightolier Lighting Systems PTS8-1 User manual

Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS8-1
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
%
Quarter Scale
Features
1. Housing: Die-formed 20 gauge pre-painted steel. Integral heavy gauge bulk-
heads support housing and trim, permitting modules to be bolted together in
continuous runs and facilitate suspension.
2. Lamping: Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete ROW.
3. Stagger rows must be completed with an adjustable module.
4. Non-stagger rows must be completed with an adjustable module unless row
lengths are in precise 1 foot (30.48cm) intervals.
5. Order one END SET per ROW.
Labels
UL, cUL and IBEW
Ordering Instructions
Individual Fixtures:
1. Order number of MODULES required.
2. Order one END SET per MODULE.
(2-light only)
3. Reflector: Precision parabolic roll-formed semi-specular aluminum.
4. Louver: Lift and shift straight blade louver constructed fromdie-formed alu-
minumand painted to match housing. Louver blades are 1” (2.54cm) high on
1-1/8” (2.86cm) centers. (Optional)
Mounting
“J” Rail is first mounted to the wall and the modules connect to the rail for 1/4”
(0.64cm) wall adjustment. Modules are hung fromsuspension wires attached to the
fixture bulkheads and the structure above.
Electrical
Electronic Ballast: Programmed start, 3 conductor, 12 gauge wire. Color-coded
quick connectors allow easy connection for modular fixutres. Factory installed
ballast disconnect allows the ballast to be disconnected fromand reconnected to
incoming power under load without turning the entire circuit off.
Dimming: Advance Mark X, use Advance compatible two-wire control (no extra
Emergency Battery Pack: 450 Lumens @ 90 minimum.
control lead required).
Cross-sectional one linear T8 fluorescent lamp. Provided by others.
Family Lamps Shielding Voltage
PTS8 1
Length Options
Blank = No Options
A= Adjustable*
X4 = 4 thru wires
X5 = 5 thru wires
A4 = Adjustable 4 thru wires*
A5 = Adjustable 5 thru wires*
1= 1 LampO= Open
L= Lens
S= Straight
Blade Louver
1= 120V
2= 277V
3= 347V
D1 = 120V Dim.
D2 = 277V Dim.
E1 = 120V Emerg.
E2 = 277V Emerg.
Module Ordering Information
7"
(17.78cm)
9 3/8" (23.81cm)
5 1/2" (13.97cm)
13
4
2
* only available on Two-Foot, Three-Foot and Four-Foot versions. See length variations of adjustable fixtures on page 2.
2= Two-Foot
3= Three-Foot
4= Four-Foot
6= Six-Foot
8= Eight-Foot

Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS8-1
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
%
End Cap Set:
PTSEP
12”
(30.48cm)
1 3/4"
(4.45cm)
90° Inside Corner: 90° Outside Corner:
6 1/4"
(15.88cm)
135° Inside Corner:
PTS135INCO - Open
PTS135INCL - Lens
PTS135INCS - Straight
Blade Louver
2"
(5.08cm)
135° Outside Corner:
PTS135OTCO - Open
PTS135OTCL - Lens
PTS135OTCS - Straight
Blade Louver
PTS9ØINCO - Open
PTS9ØINCL - Lens
PTS9ØINCS - Straight
Blade Louver
PTS9ØOTCO - Open
PTS9ØOTCL - Lens
PTS9ØOTCS -Straight
Blade Louver
End Plate and Corner Block Accessories
Sample Run
For Fixture Using Staggered Lamps
The Four-Foot Adjustable Staggered Fixture has a range of 51”(129.54cm) - 60”(152.40cm).
The Three-Foot Adjustable Staggered Fixture has a range of 39”(99.06cm) - 48”(121.92cm).
The Two-Foot Adjustable Staggered Fixture has a range of 27”(68.58cm) - 36”(91.44cm).
For Fixture Using non-Staggered Lamps
The Four-Foot Adjustable Fixture has a range of 48.75”(123.83cm) - 60”(152.40cm).
The Three-Foot Adjustable Fixture has a range of 36.75”(93.35cm) - 48”(121.92cm).
The Two-Foot Adjustable Fixture has a range of 24.75”(62.87cm) - 36”(91.44cm).
6' (182.88cm)4' (121.92cm)Three-Foot A¹
8' (243.84cm)Three-Foot A¹
6' (182.88cm)
Three-Foot A¹ 3' (91.44cm)
Three-Foot A¹4' (121.92cm)
1 3/4"
(4.45cm)1 3/4"
(4.45cm)
¹ A = Adjustable Fixture or Adjustable Staggered Fixture
21' - 10 3/4" (667.39cm)9' - 3 1/4" (282.58cm)
7' - 10 1/2"
(240.03cm)
7' - 10 1/2"
(240.03cm)
1’ (30.48cm)
Fixture used at
3’ - 10 3/4”
(118.75cm)
Fixture used at
3’ - 3 1/4”
(99.70cm)
Fixture used at
3’ - 10 1/2”
(118.11cm)
Fixture used at
3’ - 10 1/2”
(118.11cm)
Floor cavity reflectance = 20%
Performance & Quick Calculators
1400
1050
700
350
30
40
50
60
70
80
90
-30
-20
-10
10
0
20
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY REFLECTANCE
80 70 50
% WALL REFLECTANCE
70 50 30 70 50 30 50 30 10
0474747464643 444444
1444241434140 403938
2413836403735 363433
3383432373431 333129
4353129353128 302826
5332926322826 282523
6312724302624 262321
7292522292422 242120
8282320272320 222018
9262219262119 211917
10 25 20 18 24 20 17 20 17 16
0
0
0
0
0
0
0
0
0
0
12 22 0
16 27 0
21 52 33 33 6
43 162 65 59 12
297 171 110 85 19
340 280 243 86 31
509 478 527 89 31
742 770 800 159 64
1064 1145 1040 346 215
1604 1398 1208 927 763
1244 1244 1244 1244 1244
ZONAL LUMEN SUMMARY
ZONE LUMENS % BARELAMP % LUMINAIRE
0-90 1162 39.4 100.0
90-180 0 0.0 0.0
0-180 1162 39.4 100.0
Report No: ITL53557
Cat No: PTS81S14
Lamps: 1 F32T8
Lumens: 2900
Efficiency: 39.4%
ROOM CAVITY RATIO
0
0
0
0
0
0
0
0
0
0
0
9
0
0
0
0
0
0
0
0
0
0
0
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
180
175
165
155
145
135
125
115
105
95
90
85
75
65
55
45
35
25
15
5
0
CANDLEPOWER
DEG.
ZONE 0 45 18013590