Lightolier PRISTINE T2 User manual

91/4"
12"
6"
from the back edge
.149" diameter
#25 drill
PRISTINE™T2 Task Lighting
Installation Instructions
WARNING:
To Prevent Risk
of Electrical Shock . . .
3Ensure that circuits to which the lights are connected
are properly grounded and are the correct voltage.
4To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
1All electrical installations must be done by
qualified personnel in accordance with codes
regulations applicable at the installation site.
2Before beginning work, ensure that electrical
power has been removed from the circuits that
are being connected to or disconnected from.
1
Position the light’s keyhole slots over the screws, shift right to engage.
Find the center and mark holes as indicated. Drive screws into binder bin
or shelf with shoulder washers. (Do not over drive screws)
2
For Dimming Units Only:
• Press and release button
for on/off.
• Press and hold to dim.
• Release to set dimming level.
keyhole
45 Industrial Way
Wilmington, MA 01887
939504881 Rev B