Lightolier Calculite 7052QD User manual

Calculite®Incandescent Adjustable Accent 7052QD
Page 1 of 2 4 1/4” Aperture T4 Clear T. H. Framing Projector
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Housing: Spun 16 ga. aluminum separates from frame for inspection
through aperture.
2. Lampholder: Die-formed steel yoke with mini-can socket, 18 SF1 leads to
J-box.
3. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use with standard 3/4" or 1 1/2" lathing channels, or 1/2"
(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.
4. Face Plate: Die-formed steel 20 ga. with integral cone, matte white baked
enamel.
5. Aperture Cone: Designed to minimize glare and reduce brightness at ceiling
plane.
6. Molded Trim Ring: Provides minimum width white flange in dry or plaster
ceiling.
7. Horizontal Locking Device: Provides locking of horizontal rotation. Optical
assembly rotates up to 358°.
8. Mounting Frame: Die-cast aluminum, suitable for dry or plaster ceilings.
9. Locking Device: Allows removal of optical system for relamping without
disturbing shutter position.
10.Vertical Locking Device: Locks optical assembly which may be adjusted
from 0° to 45°.
11.Focusing Lens: System provides hard or softened edge image projection.
12.Shutters: Four spring shutters with porcelain hand knobs allow for adjust-
ment by cut-off of edge of light beam. Internal clips hold 2" square or round
templates (included).
13.Junction Box: 14 ga. steel, 4" x 3" x 2" box allows inspection from below.
14.Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
Accessories and Options
18" Mounting Bars 1950 (set of 2)
27" Mounting Bars 1951 (set of 2)
T-Bar Anchor Clips 1956 (set of 4, for 1950 & 1951 bars)
Wood Joist Mtg. Bars 7994 (set of 2)
Step Down Transformer 7997 (277V primary 1.1 amp/120V secondary,
300W capacity)
Electrical
UL Listed for maximum of 8 No. 12, 75°C through branch circuit supply conduc-
tors, or 60°C supply conductors for end of run.
Labels
UL Listed for damp locations, I.B.E.W.
Ceiling Cutout: 9 1/4” (235 mm) Dia.
Catalog Number Lamp
7052QD Matte White Finish T-4 100W
Clear Tungsten Halogen, Mini-Can Base, 120V
7 7/8"
4 1/8: Dia
.
Aperture
9 15/16"
Overlap
12
34 56 7 8910
11 12
13
9 3/16"
Flush
14
3"
1" min.-
1 7/8" max.
(Ceiling Runner)
3/4" max.
Ceiling
Thickness
Flush Trim White Trim Ring
Top View

Calculite®Incandescent Adjustable Accent 7052QD
Page 2 of 2 4 1/4” Aperture T4 Clear T. H. Framing Projector
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Job Information Type: