Lightolier QVW8SPFOS2FT User manual

Mounting Methods / Features Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 5 / Folio L70-15
Features
• Efficiency 69.7%.
• Uses mounting surface as part of optical system.
• Swing down microperforated lamp shields for easy relamping and
maintenance.
• Alter soft white film on inside of mesh conceals lamp image
providing balance between reflected and direct light.
• 95% Reflective Alter soft white paint finish.
• One piece body for easy installation.
• Optional acrylic drop-down visual element (ceiling mount only).
• Meets ADA when wall mounted.
24"(610mm)
Microperforated
mesh lamp shields
4"(102mm)
9"(229mm)
ALTER SOFT LIGHTS QVW8SPFOS2FT
Page 1 of 2 SURFACE SCONCE II, 9”x24”DIRECT/INDIRECT FLUORESCENT
2 LAMP, TT5 BI-TUBE, 4’’ DEEP
MICROPERFORATED MESH LAMP SHIELD
Microperforated mesh
lamp shields
Swing down optical system for
easy relamping and maintenance

ALTER SOFT LIGHTS QVW8SPFOS2FT
Page 2 of 2 SURFACE SCONCE II, 9”x24”DIRECT/INDIRECT FLUORESCENT
2 LAMP, TT5 BI-TUBE, 4’’ DEEP
MICROPERFORATED MESH LAMP SHIELD
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] •Fax [phone]
631 Airport Road, Fall River, MA 02720 •[phone] •Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 5 / Folio L70-15
Job Information Type:
Specifications
MATERIALS: One piece chassis constructed from die formed 20 gauge cold rolled
steel. Reflectors - 95% reflectance baked white acrylic matte paint finish. Soft
white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P”ballast (Bi-tube type).
If K.Os are within 3”of ballast use wire suitable for at least 90C.
LABELS: Listed by
Photometry
Ordering Information
Explanation of Catalog Number. Example: QVW8SPFOS2FT120SB
QUALITY
VISUAL
STATIC
Wall/Surface direct
indirect soft light
optical system FIXTURE
WIDTH:
9”
WALL/SURFACE
LAMP SHIELD:
PF = Microperforated
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH:
(NOMINAL 24”)
FT = TT5
Bi-Tube
VOLTAGE:
120V
277V
347V
QVW 8 S PF 2FT
BALLAST:
BE = 50W Electronic TT5 RS
BR = 40W Electronic TT5 RS
BX = 40W Magnetic TT5 RS
PB = 40W TT5 PowerSpec Dimming*
PC = 50/55W TT5 PowerSpec Dimming*
SB = 40W Generic Electronic TT5
*Not available in 347V.
OPTIONS:
R = Radio Interference Filter
O = Emergency Lighting System
(for Canada)
N =Emergency Lighting System
(for U.S.)
CLEAR POLISHED
ACRYLIC DROP
DOWN VISUAL
ELEMENT (Ceiling mount only):
OS = Open slot (no acrylic)
GC = Clear acrylic
GG = Clear acrylic / Green projected color face
GB = Clear acrylic / Blue projected color face
GR = Clear acrylic / Red projected color face