Lightolier Lytecaster 2001FIC User manual

Lytecaster®Performance CFL Downlighting 2001FIC
Page 1 of 1 3 ¾" Aperture, 1 Light, Compact Fluorescent, IC AirSeal®, Frame-In Kit
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier is a Philips group brand
1
2
3
4
5
6
7
Reflector Trim
Frame-in Kit
Features
1. Housing: .028" (#21ga.) aluminum. UL listed for direct contact with thermal
insulation. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57
PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and
Washington State Energy Code (Section 502.4) and reduces heat loss and
condensation in ceiling. Access door for inspection of junction box.
2. Mounting Frame: .032 (#22 ga.) galvanized steel. Accommodates ceilings
up to 1 1/2" thick. 3/8" deep integral lip. Locks into position along length
of mounting bars with locking screw and bendable slot. Four slots are
positioned 90° apart to simplify alignment. Push-in/twist-out roto-clips hold
reflector flush to ceiling.
3. Junction Box: 2" X 4" X 3 1/2" (22 cu. in) .032" (#22 ga.) galvanized steel. UL
listed for maximum of 8 (#12 ga.) 90°C through branch circuit conductors.
4. Mounting Bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy
attachment and wire-in below ceiling line. Bars extend to accommodate 16"
to 24" O.C. joist spacing. Bars can accommodate 12" O.C joist spacing after
a slight field modification (see Instruction Sheet). Features integral self
tapping phillips screws for secure attachment to wood or metal construction.
Attaches to T-bar ceilings without the need of accessories.
5. Ballast: Mounted inside housing. 120V – 277V UL Listed Electronic Ballast,
end of lamp life protection, class “P” thermally protected, class “A” sound
rating.
6. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18
AWM leads to ballast.
7. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to
reflector trim by spring clip for precise optic alignment.
Complete Fixture consists of Frame-In Kit and Reflector Trim. Select each separately.
Frame-In Kit
Uniframe™Compact Fluorescent Performance Series Reflector Trims
Vertical Open Vertical Wall
Wash - Single
Vertical Wet Location
Clear Lens
Vertical Wet Location
Fresnel Lens
Vertical Wet Location
Opal Lens
2001F13ICU*
13w Quad/Triple
GX24q-1 Base
120v – 0.13amp max
277v – 0.06amp max
2001F18ICU*
18w Triple
GX24q-2 Base
120v – 0.16amp max
277v – 0.07amp max
2001CL
2001CD
2001WH
2001CLSW
2001CDSW
2001WHSW
2001CLC
2001CDC
2001WHC
2001CLF
2001CDF
2001WHF
2001CLO
2001CDO
2001WHO
Options & Accessories
Extra-Thick Ceiling
Mounting Ring: 1967B - 1 1/4" to 2" thick ceilings
Labels
cULus Listed (Type I.C., Suitable for Damp Location), I.B.E.W.
Complies with Air Leakage Requirements stated in the Model Energy Code and
the Washington State Energy Code.
AirSeal®is a registered trademark of Lightolier
Top View
Overall Length
Ceiling Opening: 3 15/16"
Overall Width
10 3/8"
13" Min.
24" Max.
15 5/16"
12 1/4"
Height: 7 1/4"
*Add N to catalog number for preset nails.