Lightolier PTS6-2 User manual

Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS6-2
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
$
Quarter Scale
Features
1. Housing: Die-formed 20 gauge pre-painted steel. Integral heavy gauge bulk-
heads support housing and trim, permitting modules to be bolted together in
continuous runs and facilitate suspension.
2. Lamping: Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete ROW.
3. Stagger rows must be completed with an adjustable module.
4. Non-stagger rows must be completed with an adjustable module unless row
lengths are in precise 1 foot (30.48cm) intervals.
5. Order one END SET per ROW.
Labels
UL, cUL and IBEW
Ordering Instructions
Individual Fixtures:
1. Order number of MODULES required.
2. Order one END SET per MODULE.
(2-light only)
3. Reflector: Precision die-formed CRS finished in a high reflective baked white
4. Louver: Lift and shift straight blade louver constructed fromdie-formed alu-
minumand painted to match housing. Louver blades are 1” (2.54cm) high on
1-1/8” (2.86cm) centers. (Optional)
powder coat.
Mounting
“J” Rail is first mounted to the wall and the modules connect to the rail for 1/4”
(0.64cm) wall adjustment. Modules are hung fromsuspension wires attached to the
fixture bulkheads and the structure above.
Electrical
Electronic Ballast: Programmed start, 3 conductor, 12 gauge wire. Color-coded
quick connectors allow easy connection for modular fixutres. Factory installed
ballast disconnect allows the ballast to be disconnected fromand reconnected to
incoming power under load without turning the entire circuit off.
Dimming: Advance Mark X, use Advance compatible two-wire control (no extra
Emergency Battery Pack: 450 Lumens @ 90 minimum.
control lead required).
Cross-sectional two linear T8 fluorescent lamps. Provided by others.
Family Lamps Shielding Voltage
PTS6 2
Length Options
Blank = No Options
A= Adjustable*
AS = Adjustable Staggered*
S= Staggered
X4 = 4 thru wires
X5 = 5 thru wires
A4 = Adjustable 4 thru wires*
A5 = Adjustable 5 thru wires*
S4 = Staggered 4 thru wires
S5 = Staggered 5 thru wires
B4 = Adjustable Staggered 4 thru wires*
B5 = Adjustable Staggered 5 thru wires*
2= 2 Lamps O= Open
L= Lens
S= Straight
Blade Louver
1= 120V
2= 277V
3= 347V
D1 = 120V Dim.
D2 = 277V Dim.
E1 = 120V Emerg.
E2 = 277V Emerg.
Module Ordering Information
* only available on Two-Foot, Three-Foot and Four-Foot versions. See length variations of adjustable fixtures on page 2.
2= Two-Foot
3= Three-Foot
4= Four-Foot
6= Six-Foot
8= Eight-Foot
7"
(17.78cm)
9 3/8" (23.81cm)
5 1/2" (13.97cm)
13
4
2

Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS6-2
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
$
End Cap Set:
PTSEP
12”
(30.48cm)
1 3/4"
(4.45cm)
90° Inside Corner: 90° Outside Corner:
6 1/4"
(15.88cm)
135° Inside Corner:
PTS6135INCO - Open
PTS6135INCL - Lens
PTS6135INCS - Straight
Blade Louver
2"
(5.08cm)
135° Outside Corner:
PTS6135OTCO - Open
PTS6135OTCL - Lens
PTS6135OTCS - Straight
Blade Louver
PTS69ØINCO - Open
PTS69ØINCL - Lens
PTS69ØINCS - Straight
Blade Louver
PTS69ØOTCO - Open
PTS69ØOTCL - Lens
PTS69ØOTCS -Straight
Blade Louver
End Plate and Corner Block Accessories
Sample Run
For Fixture Using Staggered Lamps
The Four-Foot Adjustable Staggered Fixture has a range of 51”(129.54cm) - 60”(152.40cm).
The Three-Foot Adjustable Staggered Fixture has a range of 39”(99.06cm) - 48”(121.92cm).
The Two-Foot Adjustable Staggered Fixture has a range of 27”(68.58cm) - 36”(91.44cm).
For Fixture Using non-Staggered Lamps
The Four-Foot Adjustable Fixture has a range of 48.75”(123.83cm) - 60”(152.40cm).
The Three-Foot Adjustable Fixture has a range of 36.75”(93.35cm) - 48”(121.92cm).
The Two-Foot Adjustable Fixture has a range of 24.75”(62.87cm) - 36”(91.44cm).
6' (182.88cm)4' (121.92cm)Three-Foot A¹
8' (243.84cm)Three-Foot A¹
6' (182.88cm)
Three-Foot A¹ 3' (91.44cm)
Three-Foot A¹4' (121.92cm)
1 3/4"
(4.45cm)1 3/4"
(4.45cm)
¹ A = Adjustable Fixture or Adjustable Staggered Fixture
21' - 10 3/4" (667.39cm)9' - 3 1/4" (282.58cm)
7' - 10 1/2"
(240.03cm)
7' - 10 1/2"
(240.03cm)
1’ (30.48cm)
Fixture used at
3’ - 10 3/4”
(118.75cm)
Fixture used at
3’ - 3 1/4”
(99.70cm)
Fixture used at
3’ - 10 1/2”
(118.11cm)
Fixture used at
3’ - 10 1/2”
(118.11cm)
Floor cavity reflectance = 20%
Performance & Quick Calculators
1600
1200
800
400
-30
-20
-10
30
40
50
60
70
80
90
20
10
0
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY REFLECTANCE
80 70 50
% WALL REFLECTANCE
70 50 30 70 50 30 50 30 10
0555555545454 525252
1514847494746 454443
2464239454239 403835
3423734413733 353230
4393329383329 212826
5 36 30 26 5 29 25 28 25 22
6332723322623 262220
7312420302420 232017
8292218282218 211816
9272117262014 201614
10 25 19 15 24 19 15 18 15 13
180 0
175 0
165 0
155 0
145 0
135 0
125 0
115 0
105 0
95 0
90 64 56 0
85 142 96 17 17 0
75 603 241 83 78 33
65 891 401 163 155 130
55 1540 521 262 252 245
45 1608 807 417 372 382
35 1481 957 641 519 516
25 1315 1037 832 695 675
15 1257 1174 997 884 854
5 1207 1193 1113 1066 1042
0 1134 1134 1134 1134 1134
ZONAL LUMEN SUMMARY
ZONE LUMENS % BARELAMP % LUMINAIRE
0-90 2742 46.5 100.0
90-180 0.0 0.0 0.0
0-180 2742 46.5 100.0
Report No: ITL53556
Cat No: PTS62S14
Lamps: 2 F32T8
Lumens: 2950
Efficiency: 46.5%
ROOM CAVITY RATIO
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
CANDLEPOWER
DEG.
ZONE 0 45 18013590