Lilin AHD705A3.6 User manual

Unit: mm
TOP COVER
BOTTOM CHASSIS
BRACKET
PAN ADJUSTMENT SCREW
1.
cable to the video output jack and DC power input jack of the camera (FIG.1).
Then secure the bracket to the wall(FIG.2).
Remove the camera from the inner box first. Plug the video cable and power
DC power input
Installation
Part Description & Dimension
AHD IR CAMERA
101
67
35
67
12.5mm
R 2.25
82
72.5
154
66-AHD702AOOE-3
Video output
FIG. 1 FIG. 2
2. Loosen the pan and tilt adjustment screw on the bracket to turn the camera
body to the desired angle and then tighten the screws(FIG.3).
TILT ADJUSTMENT SCREW
WINDOW
VIDEO OUTPUT JACK
DC POWER INPUT JACK (DC12V ±10%)
FIG. 3
Installation Guide

FIG.5
FIG.4
4. Then, adjust the focus and zoom of the lens to optimize video image before
tightening the screws(FIG.5).
Note: Vari Focal model only.
6-1. USER OSD SE TTI NG
A. (UP)
B. (LEFT)
C. (RIGHT )
D. (DOWN)
E. SET : Ex ecu tes s ele cti ons a nd di spl ays a subm enu f or an
item with the mark.
: Press to move the cursor upwards or to s ele ct
items.
: Press to move the cursor to the lef t and t o sel ect
or adjust the parameters of the selected item.
Th e par ame ter s cha nge s eac h tim e thi s but ton i s
pressed.
: Press to move the cursor to the rig ht an d
select or adjust the parameters of the selected
item. T he pa ram ete rs ch ang es ea ch ti me th is
button is pressed.
: Press to move the cursor downwards or to select
items.
5. Replace the top cover and tighten the screws with a screw driver(FIG.6&FIG.7).
FIG. 6
6. Connect to an Up-the-Coax (UTC) digital recorder that supports AHD-Coaxial
protocol. Then use the 8-directional buttons (FIG. 8) to adjust settings for the
best images.
FIG.8
SET
UP
DOWN
RIGHTLEFT
FOCUS
ZOOM
3. For models with vari-focal lens, a screw driver is required to open the top
cover of the camera (FIG. 4).
FIG. 7