Lilin IPD312S4 User manual

Instr uction Manual
66-IPD31CSE
IPD312S4.3
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
D/N 720P HD Vandal Resistant
Dome IP Camera

IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.

CONGRATULATIONS
Thank you for purchasing this D/N 720P HD Vandal Resistant
Dome IP Camera. You now own one of the many fine network
products we manufactured. This product has been carefully
inspected under rigid quality control and should reach you in
perfect condition. With reasonable care, it will provide years of
reliable performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.
DO NOT
NSTALL OR OPERATE THIS PRODUCT

IPD312S4.3 is an D/N 720P HD Vandal Resistant Dome IP
Camera, built-in H.264 AVC(Advanced Video Coding) video
compression. H.264 AVC video compression engine supports
high definition video quality, 720P(1280x768) resolution,
bandwidth efficiency with PPPoE and DDNS.
Also it provides higher bit rate of internet and diverse alarm
functions such as movement video detection e-mail or FTP.
Moreover, IPD312S4.3 can do remote surveillance with iPad,
iPhone or Android cell phone. The software R&D engineer can
use HTTP protocol(HTTPAPI) or ONVIF protocol to develop
related software, and integrate them with existing application
software system.
D/N 720P HD Vandal Resistant Dome IP Camera is ideal solution
for remote video monitoring via internet.
Executive Summary

PART DESCRIPTION & DIMENSION
1DC12V Power Input Jack (DC12V 10%)
RJ-45 Network Connector
Reset Cable
To restore the server to factory default setting.
Bottom Chassis
Outer Cover
Camera Body
Network Indicator LEDs
Green(LINK): Network cable connected, this LED lit.
Orange(ACT): Data communications, this LED flashes.
Lens
Mask
±
2
3
4
5
6
7
8
9
Unit: mm
130
60
12
115
1
2
3
4
5
6
7
8
9

INSTALLATION
1. Please use the enclosed hexagon screw driver to untighten the 2 screws on the
bottom chassis (FIG.1).
FIG. 1
2. Rotate the bottom chassis and outer cover until both " " marks are align, then
separate them (FIG.2 & FIG.3).
│
FIG. 2 FIG. 3

4. Plug the network cable and power cable to RJ-45 network connector and DC
power input jack of the IP camera (FIG.6).
RJ-45
Network Cable
DC12V
Power Input
3. Put the provided screws (M3.0*25, wooden screw) through the holes marked as
"a", and fix the bottom chassis in the desired area (FIG.4 & FIG.5).
FIG. 4 FIG. 5
a
a
47
120°
a
5. Align the bottom chassis and outer cover's " " marks and press them together
(FIG.7), rotate the outer cover for adjusting desired horizontal angle of camera,
afterwards, use hexagon screw driver to screw both sides of bottom chassis
tightly (FIG.8).
│
FIG. 6

FIG. 7 FIG. 8
6. Loosen the screws on the outer cover to rotate the camera body to the desired
angle and then tighten the screws (FIG.9 & FIG.10).
FIG. 9 FIG. 10

1. D/N 720P HD Vandal
Dome IP Camera
2. Instruction Manual
3. CD Software Pack
IPD552EX2.2/4.2 N/P
H.264 HD IP Cameras
INSTRUCTION MANUAL
PRODUCTION COMPONENTS
For connecting IPD312S4.3 to the network, please follow one of the system architectures:
(1). Use DC12V power adapter and network switch connected to a network.
SYSTEM ARCHITECTURES
4. Power Adaptor
PC
LAN LAN / Internet
Non-PoE Switch
IPD312S4.3
DC12V Adaptor
Instruction Manual
IPD312S4.3
D/N Megapixel HD Vandal Resistant
Dome IP Camera