Lilin ATR 700TVL User manual

MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
INSTRUCTION MANUAL
ATR 700TVL COLOR MINI DOME CAMERA
CMD2082 N/P 3.6/6
66-CMD208CSE

IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
thatmaybeofsufficientmagnitudetoconstituteariskofelectric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance(servicing)instructionsintheliterature
shocktopersons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NOUSERSERVICEABLEPARTSINSIDE.
REFERSERVICINGTOQUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSEOFUSEDBATTERIESACCORDING
TOTHEINSTRUCTIONS

CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.

CONGRATULATIONS
Thank you for purchasing this ATR 700TVL Color Mini Dome
Camera. You now own one of the many fine CCTV products we
manufactured. This product has been carefully inspected under
rigid quality control and should reach you in perfect condition.
With reasonable care, it will provide years of reliable performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I. Contact your dealer for
assistance.
DO NOT
NSTALL OR OPERATE THIS PRODUCT

WARRANTY INFORMATION
Please complete the following product purchase information. The
factory will requests this information when contacted for technical
support, or warranty repair. It is also valuable in case of loss or
theft.
Purchase Date
Serial Number
Model Number
：
：
：

PART DESCRIPTION & DIMENSION
VIDEO OUTPUT JACK
DC12V POWER INPUT (DC12V10%) JACK
BASE
INNER FIX RING
OUTERFIXRING
DOME
LENS
±
110
70
62.2
90 Unit:mm

INSTALLATION
1.AttachMounting
Use the provided screws (M3.0x25, wooden screw) to screw 3 points of "a"
on the base to mount it ion the desired position.
Please refer to FIG.1.
FIG.1
a
aa
2.EmbeddedMounting
A. Disassemble base & inner fix ring and keep the ring only.
Please refer to FIG.2.
B. Use the provided screws (M3.0x20, wooden screw-flat head) to screw 3
points of "b" on the inner fix ring to mount it on the desired position.
Please refer to FIG.3.
FIG.2

b
b
b
FIG.3
3. Next, Adjust the OSD menu to form the optimal image.
A. (UP): Push up to move the cursor upwards or to select items.
B. (LEFT): Push left to move the cursor to the left and to select or adjust
the parameters of the selected item. The parameters changes
each time this button is pushed.
C.(RIGHT):Push right to move the cursorto the right and toselect or
adjust the parameters of the selected item. The parameters
changes each time this button is pushed.
D.(DOWN): Push down to move the cursor downwards or to select items.
E.SET:Presstoexecutesselectionsanddisplaysasubmenuforanitem
with the mark.
USER OSD SETTING
Settingswitchesandfunctions,please refer to FIG.4.
UP
DOWN
SETRIGHTLEFT
FIG.4

4. Put in the dome and fix the outer fix ring to the inner fix ring and twist it to the
lockposition.Pleasereferto FIG.5 & FIG.6.
NOTE: Make sure the "" mark next to the lens is on the upside.●
"" Mark●
"" Mark●
FIG. 5
Attached Mounting
FIG. 6
Embedded Mounting

CONFIGURATION OF THE MENU
SETUP
MENU SHUTTER/
AGC AUTO
MANUAL
HIGH LUMINANCE
LOW LUMINANCE
MODESHUT+AGC－
SHUTTER1/60(1/50)1/100(1/120)1/250~1/10000－//
AGC6.0012.0018.0024.0030.0036.0042.0044.80－///////
MODE
MODEAGCOFF－/
BRIGHTNESS(000~255)
BRIGHTNESSx0.25x0.50x0.75x1.00－///
AUTO IRIS
SHUT+AUTO IRIS
WHITE BAL
ATR
PICT ADJUST
BACKLIGHTOFF/BLCHLC－/
ATW
OFF
MIRROROFF/ON－
B-GAIN(000~255)
B-GAIN(000~255)
LUMINANCELOWMIDHIGH－//
SPEED(000~255)
PUSH
ON
BRIGHTNESS(000~255)
CONTRAST(000~255)
SHARPNESS(000~255)
HUE(000~255)
GAIN(000~255)
R-GAIN(000~255)
R-GAIN(000~255)
CONTRASTLOWMIDLOWMIDMIDHIGHHIGH－////
DELAY CNT(000~255)
USER 1
USER 2
ANTI CR
MANUALLEVEL(000~255)－
PUSH LOCK
ATW FRAMEx0.50x1.00x1.50x2.00－///
ENVIRONMENTINDOOROUTDOOR－/

PRIVACY OFF AREA SEL1/8~8/8－ON TOP [000~244(NTSC), 000~288(PAL)]
BOTTOM [000~244(NTSC), 000~288(PAL)]
LEFT [000~474(NTSC), 000~468(PAL)]
RIGHT [000~474(NTSC), 000~468(PAL)]
COLOR(1~8)
TRANSP0.000.500.751.00－///
MOSAICOFFON－/
NR NR MODEY/COFF/Y/C－/
Y LEVEL(000~015)
C LEVEL(000~015)
CAMERA ID
SYNCINT－
LANGUAGEENGLISH－//////
/
日本語
中文 DEUTSCHFRANCAISPYCCK PORTUGUES ESPANOL
OFF
ON
NN
^
~
^
CAMERA RESET

SETTING MENU AND FUNCTION
TO Open and Exit the Menu screen
1. Press "SET" button.
The Menu screen appears on the monitor. Check the current settings on
the menu.
2. Pushorbutton to select the options then useorbutton to select a
mode.
NEXT: To the next setup menu.
BACK: Return to the previous.
RETURN: Return to the previous.
SAVE ALL: Used to save the various setting of the internal OSD menu
in the EEPROM together.
EXIT: Exit the setup menu.
SETUP MENU
ATW
OFF
OFF
OFF
AUTO
WHITEBAL
BACKLIGHT
PICTADJUST
ATR
PRIVACY
NR
NEXT
EXITSAVEALL
SHUTTER/AGC
SETUP MENU
INT
ENGLISH
OFF
SYNC
LANGUAGE
CAMERARESET
BACK
EXITSAVEALL
CAMERAID
Pleaseselect AUTOmodeon theSHUTTER/AGCoption. Ifyouselect MANUAL
mode, the over exposure may occur.
NOTE

SPECIFICATIONS
Lens
System
Model No.
Pick Up Element
Effective Pixels
Chip Size
Horizontal & Vertical
Sync. Frequency
Scanning System
Menu Control
Sync. Mode
Resolution
Min. Illumination
S/N Ratio
Auto Gain Control
White Balance
Adaptive Tone
Reproduction
Shutter Auto
Luminance
Manual
Contrast
Back Light Compensation
Noise Reduction
Picture Adjust
Privacy Masking
Privacy Masking Zone
OSD Language
Video Output
Power Input Voltage
Focal Length
Iris
Angle of View H V
D
3.6mm
F2.0
NTSC or PAL
1/3"ExviewHADCCDSensor
976(H) x 494(V) [NTSC]
976(H) x 582(V) [PAL]
5.58mm(H) x 4.67mm(V)
15.734KHz / 59.94Hz [NTSC]
15.625KHz / 50Hz [PAL]
2:1 Interlace
OSD Control
Internal
700 TV Lines
0.2 Lux / F1.8
More than 50dB (AGC-OFF)
AUTO / MANUAL
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
1/60(1/50)S ~ 1/100,000S
1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S / 1/2,000S / 1/4,000S / 1/10,000S
LOW / MID / HIGH
LOW / MIDLOW / MID / MIDHIGH / HIGH
OFF / BLC / HLC(High Light Compensation)
Y / C / Y/C / OFF
MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
ON / OFF
8 Zones
ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE
CVBS1.0Vp-p, 75Ohm
DC12V 10%±
CMD2082N/P3.6
73°
54.5°
92°
ATR 700TVL COLOR MINI DOME CAMERA CMD2082N/P6
Gamma Characteristic γ=0.45
Design and specification are subject to change without notice.
Power Consumption
Operating Temperature
Dimension
Weight
-10 ~ +50℃℃℉℉(14 ~ 122)
Dome: 62.2,Base&FixRing: 110 x 45mmψψ
1.9W
350g
6.0mm
44.5°
33.1°
56°
F1.8
66-CMD208CSE-1

MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
INSTRUCTION MANUAL
ATR 700TVL COLOR MINI DOME CAMERA
CMD2082 N/P 3.6/6
66-CMD208CSE