Lilliput 569-O/P User manual

COLOUR TFT
LCD
MONIT O R
Use r Manu al

I MPOR T AN T SAFETY I NS TR UC TI ONS :
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.
P ROD UC TS:
This product employs integrate circuits, lower power consumption, and lower
radiation emission. It has fashion designed appearance and good portability.
With peaking, false color, exposure and histogram functions
HDMI & YPbPr Input, to connect with Full HD Video Camera.
LED backlight display, supports 1920×1080 HD resolution.
With sun shade to see clearly under sunshine.
Center Marker, Screen Marker, RGB, mono and color display, 16:9、4:3and
full screen aspect ratio switch, underscan/overscan switch, HDMI & Video
signal loop output.
CAUTION S：
1. Please do not place the display screen toward the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with
a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or
thunder weather.

PRODUCT DESC RIP TION
1. EAR: Earphone jack
2. POWER: ON/OFF (light turns red when standby, turns green when
working)
3. VIDEO: Indicator lights up when signal switch to video state.
4. YPbPr: Indicator lights up when signal switch to YPbPr state.
5. HDMI: Indicator lights up when signal switch to HDMI state.
6. F1、F2、F3、F4：user-definable function buttons: mark, underscan, color
mode, ratio, camera, peaking, false color, exposure and histogram.
Def au l t:
F1: PEAKING
F2: FALSE COLOR
F3: EXPOSURE
F4: HISTOGRAM
7. Knob BRI/M/SEL: Press the knob to access the menu function, pressing
the knob in the menu to return to the previous page or exit the
menu.Rotate knob to select an option. (Default: Brightness function,
rotate the knob to adjust the brightness directly.)
8. Knob VOL/ADJ: Rotate knob to confirm the selection and adjust the
parameter values. (Default: Sound function, turn the knob to adjust the
volume)

9. Sun shade cover
10. Mounting socket (left side)
11. Video signal output
12. Video signal input
13. Audio signal input
14. Y signal input
15. Pb signal input
16. Pr signal input
17. HDMI (High Definition Multimedia Interface) signal output
18. HDMI (High Definition Multimedia Interface) signal input
19. Mounting socket (bottom)
20. Battery slot
21. DC power input
22. Battery power on/off switch
23. Speaker
24. Mounting socket (right side)
There are 3 bracket jacks in the Lift 、 right and bottom of the device, as
shown“ ” 。

DV BATTERY MOUNT P L A TE :
Standard mounts process ：
Following three types of battery plates are suitable for this device, user can
choose two of the three (See the pictures below).

DV Battery Mount Pl ate:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic
battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV116/D
CR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.

a – L ill iput.co m.ru
NAM E F UNCTION
Brightness Adjust the level of brightness
Contrast Adjust the level of contrast
Saturation Adjust the level of saturation
Sharpness Adjust the sharpness of picture
Tint Adjust the tint of image
Volume Adjust the volume
Color mode Choose the color temperature. Options:
User, 6500ºK, 7500 ºK, or 9300 ºK.
Red
Green
Blue
Note: Only available under “User” mode to
meet the color value you need.
SETTING MEN U
Before setting the functions, please make sure the device is connected corr ect ly.
When power on, press BRI/M/SEL knob on the device, function menus will pop-
up on the screen.
Rotate BRI/M/SEL knob to select the options displayed on the screen, than rotate
SAT/ADJ knob to confirm and adjust option value.
After confirm the option value, then press BRI/M/SEL knob to return to
the previous, and press the BRI/M/SEL knob again to exit the menu settings.
MAIN M ENU:
PICTURE M ENU :

K EY CON
F IGUR E:
4 user-definable function buttons: F1 , F2, F3 and F4 functions can be customized as:
mark, underscan, color mode, ratio, camera, peaking, false color, exposure and
histogram.
Knobs 1-2 can be set to alter the brightness, contrast, saturation, sharpness, tint,
volume, red, green, and blue for the shortcut keys.
Knob 1 defaults as Brightness function.
Knob 2 defaults as Volume function. .
SOURCE M ENU
Disable or Enable the following input sources:
VIDEO 、 YPbPr 、 HDMI.

MISC M ENU
Blue mode: blue mode can be set on/off.
Reset: confirm the recovery into factory mode.
Language: English/Chinese switch.
Peaking: Mono/Color

AC CE SSORIES :
Standard acc esso ries
1. Sun shade cover 1 piece
2. Battery plate (DC21/QM91D/F970/LP-E6) 2 piece (choose 2 out of 4)
3. Manual 1 copy
4. Shoe mount (for camera only) 1 piece
5. DC adapter 1 piece
Optional acc esso ries
1. HDMI to mini HDMI cable 1 piece
2. Li-ion battery 1 piece

P AR AME TE RS :
Panel S i ze 5’ ’ TFT LCD
Resol ut ion 800×480, support 19 20×1 080
Contr ast 600 :1
V i ew i ng Ang l e 130°/ 15 0° (H/V)
Input V olt a ge DC 12V
Support m ode l
PA L ， NTSC ， 480 p/i 、 72 0p 、 5 76i/p 、 1080 （ i 50/60）
、
1080p(50/60) (480 i &576 i are i nva li d under YP bPr)
Input Signa l HDMI, YPbPr, AV
Batter y F970\DU21\QM91D
Curr ent 450 m A
Si ze:( L WD)
151 mm * 116 mm *39.5 mm
151 mm * 116 mm *98.1 mm (w i th co ver)
W e ight 316g / 386g (w i th cove r)
TROUBLE S HOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup.
2. Power on but no pictures:
Check whether the cables of Video, HDMI or YPbPr are correctly connected.
Please use the standard power adapter coming with the product package.
Improper power input may cause the device.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected. Broken or loose
pins of the cables may cause a bad connection.
Note: due to constant effort to improve products and product featu r es,
specifications may change without notice.