Lilliput 5DII User manual

COLOR TFT LCD M ONIT OR
User Manual

IMPORTANT SAFETY INSTR UC TIONS :
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.
CAUTION S：
1. Please do not place the display screen toward the ground.
2. Please avoid heavy impact or drop onto the ground.
3. It should avoid the humidity and extreme temperature
4. Do not place with your equipment or accessory and other inflammable liquid,
the gas or other explosive articles place together, to avoid happening
dangerous.
5. The LCD screen is very easy to shave a wound, avoid crashing please. Be sure
not to use other sharp article to bump against touch screen.
6. Please do NOT use chemical solutions to clean this product. Please wipe with
a clean soft cloth to maintain the brightness of the surface.
7. Please do not block any vent hole.
8. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.
9. Please unplug the power or remove the battery if long-term no-use, or thunder
weather.
Conte nts
1 PRODUCT DESCRIPTION .......................................................................... 2
2 INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE ....... 4
3 MENU SETTING ........................................................................................... 7
4 ACCESSORIES: ........................................................................................... 11
5 PARAMETERS: ........................................................................................... 12
6 TROUBLE SHOOTING............................................................................... 13

1PRODUCT DESC RIP TION
Positive:
1. Speaker.
2. Power indicator light：Light turns red when powered.
3. ◄Left selection key, to select items on OSD menu and value option
adjustment; Press to adjust the brightness, sharpness, contrast, saturation,
volume and Tint value decrease (Tint adjustment is only available under
VIDEO and NTSC mode).
4. ►Right selection key, to select items on OSD menu, value option
adjustment and confirmation; Press to adjust the brightness, sharpness,
contrast, saturation, volume and Tint value increase (Tint adjustment is only
available under VIDEO and NTSC mode).
5. MENU：To activate OSD (on-screen display) menu. Select switch the
brightness, sharpness, contrast, saturation, volume, MENU and Exit.
6. ▲ /5D- Ⅱ ：Up selection key, to select items on OSD menu; Press to switch ON/
OFF 5D- Ⅱ or 5D- Ⅲ mode.

7. / ：Down selection key, to select items on OSD menu; Press to
switch ON/OFF pixel-to-pixel mode.
8. F1-F4：4 user-definable buttons：
Default f unct ion:
F1: Peaking F2: False Col o rs
F3: Exposu r e F4: Histogr am
9. Earphone jack.
Back:
10. Mini USB input. (Only for program upgrades, do NOT use if
non-professionals).
11. Battery plate slot.
12. HDMI signal input.
13. HDMI signal loop output. (Optional)
14. DC 12V power input.
15. Battery power on/off switch: “ ‖ ” is battery power; “O” is power off; “|” is DC
power.
16. VESA Mounting interface

2 INSTALLATION OF SUNS HADE
COVER ANDBATTERY P L A TE
Installation of sunshade cov er ：
Installation steps Installation c o m p le ted
Disassembly of sunshade cov er ：
Disassembly steps： Disassembly co m p le ted ：

Steps of sunshade cover on / o ff:
* Please follow the instructions steps, or may damage the cove r .
Open Step: Closed st e ps:
* Do not press the edge in the under of the cove r , otherwise it will r esu lt
in open fai l u r e.
Installation of Battery and Battery Mount P l at e

The included three types of battery plate are suitable for this device, Standard
accessories model: F970.
DV Battery Mount Plate S pec ific ation :
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV11
6/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.

3 MEN US ET TING
*Before setting the functions, please make sure the device is connected
corr ect ly.
1. Shortcut k ey s:
1-1. the image me nu
When power on, press “ ◄/► ” key on the device, Will appear at the bottom of
the screen display of the brightness, Then press the MENU button to select
brightness, sharpness, contrast, saturation, volume, MENU and Exit. Required
by the user according to personal to User can adjust the parameters of the
selected menu with ◄/ ►button, according to their requirements.
1-2. Switch on / off 5D- Ⅱ o r 5D- Ⅲ camera mod e
Connecting the HDMI input interface with Canon5D- Ⅱ or 5D- Ⅲ camera, and
check whether camera mode in the menu setup as 480P（5D-II mode）/1080I（5D-
Ⅲ mode ） or not, according to camera's mode1 NO.. Power on, then press
the▲/ 5D- Ⅱ button to switch on/off 5D- Ⅱ or 5D- Ⅲ camera mode.
1-3. P ixel- t o -Pi xel
Turn on the power, press the / button to switch on/off pixel-to-pixel
function.
1-4. F1-F4 4 u se r -d efi n ab le function b utt on s :
Functions of F1-F4 buttons can also be customized: Aspect Ratio, Check
Field, Freeze Input, Center Marker, Underscan, H/V delay, Color Bar, Screen
Marker, Zoom, Peaking, False color, Exposure and Histogram.
F1-F4：4 user-definable function buttons.
Default f unct ion:
F1: Peaking F2: False colo r
F3: Exposu r e F4: Histogr am

2. MENU Sett i n g
When power on, press “MENU” on the device. The menu of function setting will
display on the screen.
Press ◄/►buttons on the choose main menu the display. Then press ▲ / key,
Selection screen displayed on the sub-menu options; then ►to confirm the
selection and adjustment of option value. After confirmation the main menu press
the MENU key to return.
IT EMS OPT IONS
6500ºK/7500 ºK/9300 ºK/User
Red
Green
Color Temp
Blue
Note: Only can available
under “User” mode to meet
the color value you need.
Check Field OFF，MONO，Red, Green and Blue
Aspect Ratio Full Screen,4:3 and 16:9
Pixel-to-Pixel ON/OFF
Camera
480P (5D-II Mode) / 1080I (5D- Ⅲ Mode)
H/V delay OFF,H&V Delay, V Delay and H Delay
Underscan ON/OFF

IT EMS OPT IONS
Center Marker ON/OFF
Screen Markers OFF, 95%,93%,90%,88%,85% and80%
ITEMS E OPT IONS
Language English /Chinese
Input Format OSD 5S、10S、15S
LOGO ON/OFF
Freeze Input ON/OFF
Image Flip ON/OFF
Peaking Color / Mono
Assistant Func. Manual/Auto
Manufacturer Default OK/Cancel
ISP For program upgrades (such as accidentally
press to reboot your computer)

Functions of F1-F4 buttons can also be customized: Aspect Ratio, Check
Field, Freeze Input, Center Marker, Underscan/Overscan, H/V delay, Color
Bar, Screen Marker, Zoom, Peaking, False color, Exposure and Histogram.
Note: Off, camera, X2, X4 and X8 options can be set when zoom function customized
as shortcut key.

4 AC CE SSORIES :
Standard acc esso ries :
1. Flexible folding sun shade cover 1 piece
2. DC adapter 1 piece
3. HDMI Type A-C 1 piece
4. Manual 1 piece
5. Battery Plate: F-970 1 piece
6. Shoe mount (for camera only) 1 piece
Optional acc esso ries :
1. Battery Plate: DU21 1piece
2. Battery Plate: QM91D 1piece
3. Li-ion battery 1piece
4 . VESA 75mm rail slot 1piece

5 P AR AME TE RS :
Panel S i ze 7’ ’ TFT LCD
Resol ut ion 1024×600, up to 192 0×10 80
Bri ght ness
250 cd/ ㎡
Contr ast 800 :1
V i ew i ng Ang l e 160°/ 15 0° (H/V)
Input V olt a ge DC 12V
Input Signa l HDMI
Output S i gnal HDMI (o pti o na l )
DV B atte ry F9 70/DU21 /QM 91D(optio n al)
Battery Pl a te F970, DU21/QM91D(op t i on a l )
Curr ent 800 m A
Power Consu m pti on
≤ 10 W
W o rk i ng T emper atur e -20
℃〜 60 ℃
Storage Temperature -30
℃〜 70 ℃
Si ze:( L WD)
196 .5×145×31mm
196.5×145×41mm (w i th sun shade c l os ed)
196.5×145×151.3mm (w i th sun shade o pe n)
W e ight
505g
655g (w i th c over)

6TROUBLE S HOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup.
2. Power on but no pictures:
Check whether the cables of HDMI correctly connected. Please use the standard
power adapter coming with the product package. Improper power input may
cause the device.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected. Broken or loose
pins of the cables may cause a bad connection.
4. According to the ISP, the machine can not function properly
ISP for program upgrades, non-professionals do not use. If accidentally press
this key, restart the system.
Note:
It’s a normal phenomenon to see bright stripe when power off.
Due to constant effort to improve products and product f eatu r es,
specifications may change without not ice.