Limacorporate SMR Axioma TT Metal Back Glenoid Bone... User manual

SMR AXIOMA TT METAL BACK
GLENOID BONE GRAFTING
SMR AXIOMA TT METAL BACK
INSTRUMENT
DISASSEMBLY AND
ASSEMBLY INSTRUCTIONS

INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Table of Contents
Compactor Handle
9013.75.370
Pag. >> 06
Glenoid Reamer Shaft
9013.75.350
Pag. >> 04
TT Metal Back Press
9013.75.390
Pag. >> 08
Small-R Baseplate Extractor 9013.75.391
and Baseplate Extractor 9013.75.392
Pag. >> 10
Multipurpose Handle 9095.11.250
and Screwdriver 9095.10.222
Pag. >> 12
Small-R Cannulated Reamer 9013.75.395
and Cannulated Reamer 9013.75.396
Pag. >> 14
04
06
08
10
12
14
NOTE
Consult also to the Instructions for Use “Instrument Care, Cleaning, Disinfect and Sterilization” downloadable from
www.limacorporate.com
9095.11.250
9095.10.222
The present document refers to the SMR Axioma TT Metal Back Instrument Set 9013.35.000
and SMR Glenoid Bone Graft Instrument Set 9013.36.000.
Small-R/Small Graft Reamer 9013.75.460
and STD Graft Reamer 9013.75.465
Pag. >> 16
Graft Cutter
9013.75.443
Pag. >> 17
18
16
Small-R Guide / Guide
9013.75.464 / 9013.75.469
Pag. >> 18
17

4INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
02
Rotate the red part and slide it away from the Glenoid Reamer Shaft.
03
Remove the black handle.
Glenoid Reamer Shaft
01
Pull and hold the red part of the Glenoid Reamer Shaft.
DISASSEMBLY INSTRUCTION
Cod. 9013.75.350
(Glenoid Reamer Shaft)
A) Rotate B) Slide away
A) Pull and Hold

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 5
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
01
To reassemble the Glenoid Reamer Shaft you have to reproduce the same steps in
reverse order.
To make sure that the locking mechanism is properly set the pin should be in the
neutral position.
Glenoid Reamer Shaft
ASSEMBLY INSTRUCTION
NEUTRAL

6INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Compactor Handle
01
Pull and hold the red part of the Compactor Handle.
02
Rotate the red part and slide it away from the Compactor Handle.
DISASSEMBLY INSTRUCTION
A) Pull and Hold
A) Rotate
B) Slide away
Cod. 9013.75.370
(Compactor Handle)

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 7
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
01
To reassemble the Compactor Handle you have to reproduce the same steps in
reverse order.
To make sure that the locking mechanism is properly set the pin should be in the
neutral position.
Compactor Handle
ASSEMBLY INSTRUCTION
NEUTRAL

8INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
TT Metal Back Press
Cod. 9013.75.390
(TT Metal Back Press)
01
02
DISASSEMBLY INSTRUCTION
Remove the black plate and the black tip from the Press.
Unscrew the threaded rod.
Cod. 9013.75.390
(TT Metal Back Press)

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 9
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
TT Metal Back Press
01
To reassemble the TT Metal Back Press you have to reproduce the same steps in
reverse order. Screw the threaded rod and attach the black tip onto it. A snap fit
mechanism will secure it.
02
Finally insert the black plate at the base of the Press.
ASSEMBLY INSTRUCTION

10 INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Small-R Baseplate Extractor and Baseplate Extractor
01
Unscrew the internal shaft of the Baseplate Extractor.
02
Finally remove the internal shaft from the Extractor.
DISASSEMBLY INSTRUCTION
Cod. 9013.75.391
(Small-R Baseplate Extract)
Cod. 9013.75.392
(Baseplate Extractor)

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 11
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Small-R Baseplate Extractor and Baseplate Extractor
PULL AND HOLD
01
Thread and screw the internal shaft into the Baseplate Extractor.
ASSEMBLY INSTRUCTION

12 INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Multipurpose Handle
01
Disengage the red button using the Screwdriver to rotate the red button
counter-clockwise.
02
Remove the red button with rod from the posterior part of the Multipurpose
Handle.
DISASSEMBLY INSTRUCTION
Cod. 9095.11.250
(Multipurpose Handle)
+
Cod. 9095.10.222
(Screwdriver)
Cod. 9095.11.250
(Multipurpose Handle)
Cod. 9095.10.222
(Screwdriver)

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 13
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Multipurpose Handle
01
Insert the red button with rod into the posterior part of the Multipurpose
Handle.
02
Fasten the red button to the Multipurpose Handle using the Screwdriver to
rotate clockwise.
ASSEMBLY INSTRUCTION

14 INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Small-R Cannulated Reamer and Cannulated Reamer
01
Slide the internal shaft of the Cannulated Reamer.
02
Remove the blue sleeve from the internal shaft.
03
Remove the black handle.
DISASSEMBLY INSTRUCTION
01
Slide the internal shaft of the Cannulated Reamer.
DISASSEMBLY INSTRUCTION
02
Remove the blue sleeve from the internal shaft.
03
Cod. 9013.75.395
(Small-R Cannulated Reamer)
Cod. 9013.75.396
(Cannulated Reamer)

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 15
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Small-R Cannulated Reamer and Cannulated Reamer
01
Thread the black handle into the Cannulated Reamer until it is fastened
completely.
02
Insert the blue sleeve into the internal shaft.
03
Thread the internal shaft with the blue sleeve into the Cannulated Reamer.
ASSEMBLY INSTRUCTION

16 INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Small-R/Small Graft Reamer and STD Graft Reamer
01
Remove the black handle.
DISASSEMBLY INSTRUCTION
01
To reassemble the Graft Reamer, thread the black handle into the Graft
Reamer until it is fastened completely.
ASSEMBLY INSTRUCTION
Cod. 9013.75.460
(Small-R/Small Graft Reamer)
Cod. 9013.75.465
(STD Graft Reamer)

SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS 17
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Graft Cutter
Cod. 9013.75.443
(Graft Cutter)
01
Remove the Adaptor for Graft Cutter and the black handle.
DISASSEMBLY INSTRUCTION
01
To reassemble the Graft Cutter, insert the Adaptor for Graft Cutter and the
black handle.
ASSEMBLY INSTRUCTION

18 INSTRUMENT DISASSEMBLY/ASSEMBLY INSTRUCTIONS SMR AXIOMA TT METAL BACK GLENOID BONE GRAFTING
INSTRUMENT DISASSEMBLY / ASSEMBLY INSTRUCTIONS
Cod. 9013.75.464
Small-R Guide
Cod. 9013.75.469
Guide
Small-R Guide / Guide
01
Remove the plastic sleeve from the Guide.
DISASSEMBLY INSTRUCTION
01
To reassemble the Guide, insert the plastic sleeve. A snap fit mechanism will
secure it.
ASSEMBLY INSTRUCTION

Limacorporate S.p.A.
Via Nazionale, 52
33038 Villanova di San Daniele del Friuli
Udine - Italy
T [phone]
F [phone]
[email protected]
limacorporate.com
Lima Implantes slu
Calle Asura n. 97
Madrid 28043
España
Lima France sas
1, Allée des Alisiers
Immeuble le Galilée
69500 Bron
France
T [phone]
F [phone]
[email protected]
Lima O.I. doo
Ante Kovacica, 3
10000 Zagreb - Croatia
T [phone]
F [phone]
[email protected]
Lima Switzerland sa
Birkenstrasse, 49
CH-6343 Rotkreuz - Zug
Switzerland
T [phone]
F [phone]
[email protected]
Lima Japan kk
Shinjuku Center Building, 29th fl oor
1-25-1, Nishi-shinjuku, Shinjuku,
Tokyo 163-0629 - Japan
T [phone]
F [phone]
Lima CZ sro
Do Zahrádek I., 157/5
155 21 Praha 5 - Zličín
Czech Republic
T [phone]
F [phone]
[email protected]
Lima Deutschland GmbH
Kapstadtring 10
22297 Hamburg - Germany
T [phone]
F [phone]
[email protected]
Lima Austria GmbH
Seestadtstrasse 27 / Top 6-7
1220 Wien - Austria
T [phone]
F [phone]
offi [email protected]
Lima SK s.r.o.
Cesta na štadión 7
974 04 Banská Bystrica - Slovakia
T [phone]
F [phone]
[email protected]
Lima Netherlands
Havenstraat 30
3115 HD Schiedam
The Netherlands
T [phone]
F [phone]
[email protected]
limanederland.nl
Lima Implantes Portugal S.U. Lda
Rua Olavo D’Eça Leal Nº6 Loja-1
1600-306 Lisboa - Portugal
T [phone]
F [phone]
[email protected]
Lima Orthopaedics Australia Pty Ltd
Unit 1, 40 Ricketts Rd
Mt Waverley 3149
Victoria Australia
T [phone]
F [phone]
limaortho.com.au
Lima Orthopaedics New Zealand Ltd
20 Crummer Road
Auckland 1021
New Zealand
T [phone]
F [phone]
Lima Orthopaedics UK Limited
Unit 1, Campus 5
Third Avenue
Letchworth Garden City
Herts, SG6 2JF
United Kingdom
T [phone]
F [phone]
Lima USA Inc.
2001 NE Green Oaks Blvd., Suite 100
Arlington, TX 76006
T [phone]
F [phone]
Lima Sweden AB
Företagsallén 14 B
SE-184 40 ÅKERSBERGA
Sweden
T [phone]
F [phone]
www.linksweden.se
Lima Italy
Centro Direzionale Milanofi ori
Strada 1 - Palazzo F9
20090 Assago - Milano - Italy
T [phone]
Lima Korea Co. Ltd
11 FL., Zero Bldg.
14 Teheran Road 84 GLL
Gangnam Gu, Seoul 135-845, South Korea
T [phone]
F [phone]
Lima do Brasil EIRELI
Al. Campinas, 728, second fl oor,
rooms 201, 202, 203 and 204,
Edifício Engenheiro Antonio Silva,
Zip Code 01404-001, in the City of São Paulo,
State of São Paulo
Brasil
Lima Belgium sprl
Avenue Newton, 4
1300 Wavre - Belgium
T [phone]
F [phone]
[email protected]
Lima Denmark ApS
Lyngebækgårds Allé 2
2990 Nivå - Denmark
T [phone]
F [phone]
[email protected]
Lima Turkey Ortopedi A.S.
Serifali Mah. Hendem CD. Canan
Residence No: 54/C D:2 OFIS-A2,
34775 Umraniye / Istanbul
Turkey
T [phone]
F [phone]
[e-mail]
Lima Orthopaedics South Africa
Northlands Deco Park, Stand 326
10 New Market street
Design Boulevard
Northriding
2189
Lima Polska Sp. z o.o.
Ul. Łopuszańska 95
02-457 Warszawa
Poland
T 0048 22 6312786
F 0048 22 6312604
[email protected]
limacorporate.com
This publication is not intended for distribution in the U.S.
Limacorporate S.p.A. reserves the right to make changes. Copyright © Limacorporate S.p.A. - All rights reserved.
MIS1375EN0000
07.2019